| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230329045329.64565-4-alexghiti@rivosinc.com>
Date: Wed, 29 Mar 2023 06:53:26 +0200
From: Alexandre Ghiti <alexghiti@...osinc.com>
To: Nick Desaulniers <ndesaulniers@...gle.com>,
Björn Töpel <bjorn@...nel.org>,
Michael Ellerman <mpe@...erman.id.au>,
Nicholas Piggin <npiggin@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org, linux-kbuild@...r.kernel.org
Cc: Alexandre Ghiti <alexghiti@...osinc.com>
Subject: [PATCH v9 3/6] riscv: Introduce CONFIG_RELOCATABLE
This config allows to compile 64b kernel as PIE and to relocate it at
any virtual address at runtime: this paves the way to KASLR.
Runtime relocation is possible since relocation metadata are embedded into
the kernel.
Note that relocating at runtime introduces an overhead even if the
kernel is loaded at the same address it was linked at and that the compiler
options are those used in arm64 which uses the same RELA relocation
format.
Signed-off-by: Alexandre Ghiti <alexghiti@...osinc.com>
---
arch/riscv/Kconfig | 14 +++++++++
arch/riscv/Makefile | 7 +++--
arch/riscv/kernel/vmlinux.lds.S | 17 +++++++++--
arch/riscv/mm/Makefile | 4 +++
arch/riscv/mm/init.c | 54 ++++++++++++++++++++++++++++++++-
5 files changed, 91 insertions(+), 5 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 3c5907431081..6ff9f574195d 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -562,6 +562,20 @@ config COMPAT
If you want to execute 32-bit userspace applications, say Y.
+config RELOCATABLE
+ bool "Build a relocatable kernel"
+ depends on MMU && 64BIT && !XIP_KERNEL
+ help
+ This builds a kernel as a Position Independent Executable (PIE),
+ which retains all relocation metadata required to relocate the
+ kernel binary at runtime to a different virtual address than the
+ address it was linked at.
+ Since RISCV uses the RELA relocation format, this requires a
+ relocation pass at runtime even if the kernel is loaded at the
+ same address it was linked at.
+
+ If unsure, say N.
+
endmenu # "Kernel features"
menu "Boot options"
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 6203c3378922..860b09e409c7 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -7,9 +7,12 @@
#
OBJCOPYFLAGS := -O binary
-LDFLAGS_vmlinux :=
+ifeq ($(CONFIG_RELOCATABLE),y)
+ LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro
+ KBUILD_CFLAGS += -fPIE
+endif
ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
- LDFLAGS_vmlinux := --no-relax
+ LDFLAGS_vmlinux += --no-relax
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
ifeq ($(CONFIG_RISCV_ISA_C),y)
CC_FLAGS_FTRACE := -fpatchable-function-entry=4
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index e05e6df44225..615ff5842690 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -122,10 +122,23 @@ SECTIONS
*(.sdata*)
}
- .rela.dyn : {
- *(.rela*)
+ .rela.dyn : ALIGN(8) {
+ __rela_dyn_start = .;
+ *(.rela .rela*)
+ __rela_dyn_end = .;
}
+#ifdef CONFIG_RELOCATABLE
+ .data.rel : { *(.data.rel*) }
+ .got : { *(.got*) }
+ .plt : { *(.plt) }
+ .dynamic : { *(.dynamic) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .hash : { *(.hash) }
+ .gnu.hash : { *(.gnu.hash) }
+#endif
+
#ifdef CONFIG_EFI
.pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
__pecoff_data_raw_size = ABSOLUTE(. - __pecoff_text_end);
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index 2ac177c05352..b85e9e82f082 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -1,6 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
CFLAGS_init.o := -mcmodel=medany
+ifdef CONFIG_RELOCATABLE
+CFLAGS_init.o += -fno-pie
+endif
+
ifdef CONFIG_FTRACE
CFLAGS_REMOVE_init.o = $(CC_FLAGS_FTRACE)
CFLAGS_REMOVE_cacheflush.o = $(CC_FLAGS_FTRACE)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index f803671d18b2..bce899b180cd 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -20,6 +20,9 @@
#include <linux/dma-map-ops.h>
#include <linux/crash_dump.h>
#include <linux/hugetlb.h>
+#ifdef CONFIG_RELOCATABLE
+#include <linux/elf.h>
+#endif
#include <asm/fixmap.h>
#include <asm/tlbflush.h>
@@ -146,7 +149,7 @@ static void __init print_vm_layout(void)
print_ml("kasan", KASAN_SHADOW_START, KASAN_SHADOW_END);
#endif
- print_ml("kernel", (unsigned long)KERNEL_LINK_ADDR,
+ print_ml("kernel", (unsigned long)kernel_map.virt_addr,
(unsigned long)ADDRESS_SPACE_END);
}
}
@@ -831,6 +834,44 @@ static __init void set_satp_mode(void)
#error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
#endif
+#ifdef CONFIG_RELOCATABLE
+extern unsigned long __rela_dyn_start, __rela_dyn_end;
+
+static void __init relocate_kernel(void)
+{
+ Elf64_Rela *rela = (Elf64_Rela *)&__rela_dyn_start;
+ /*
+ * This holds the offset between the linked virtual address and the
+ * relocated virtual address.
+ */
+ uintptr_t reloc_offset = kernel_map.virt_addr - KERNEL_LINK_ADDR;
+ /*
+ * This holds the offset between kernel linked virtual address and
+ * physical address.
+ */
+ uintptr_t va_kernel_link_pa_offset = KERNEL_LINK_ADDR - kernel_map.phys_addr;
+
+ for ( ; rela < (Elf64_Rela *)&__rela_dyn_end; rela++) {
+ Elf64_Addr addr = (rela->r_offset - va_kernel_link_pa_offset);
+ Elf64_Addr relocated_addr = rela->r_addend;
+
+ if (rela->r_info != R_RISCV_RELATIVE)
+ continue;
+
+ /*
+ * Make sure to not relocate vdso symbols like rt_sigreturn
+ * which are linked from the address 0 in vmlinux since
+ * vdso symbol addresses are actually used as an offset from
+ * mm->context.vdso in VDSO_OFFSET macro.
+ */
+ if (relocated_addr >= KERNEL_LINK_ADDR)
+ relocated_addr += reloc_offset;
+
+ *(Elf64_Addr *)addr = relocated_addr;
+ }
+}
+#endif /* CONFIG_RELOCATABLE */
+
#ifdef CONFIG_XIP_KERNEL
static void __init create_kernel_page_table(pgd_t *pgdir,
__always_unused bool early)
@@ -1029,6 +1070,17 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
#endif
+#ifdef CONFIG_RELOCATABLE
+ /*
+ * Early page table uses only one PUD, which makes it possible
+ * to map PUD_SIZE aligned on PUD_SIZE: if the relocation offset
+ * makes the kernel cross over a PUD_SIZE boundary, raise a bug
+ * since a part of the kernel would not get mapped.
+ */
+ BUG_ON(PUD_SIZE - (kernel_map.virt_addr & (PUD_SIZE - 1)) < kernel_map.size);
+ relocate_kernel();
+#endif
+
apply_early_boot_alternatives();
pt_ops_set_early();
--
2.37.2
Powered by blists - more mailing lists