[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230203-evk-board-support-v3-11-0003e80e0095@baylibre.com>
Date: Wed, 29 Mar 2023 10:54:32 +0200
From: Alexandre Mergnat <amergnat@...libre.com>
To: Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Wenbin Mei <wenbin.mei@...iatek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Zhiyong Tao <zhiyong.tao@...iatek.com>,
Bernhard Rosenkränzer <bero@...libre.com>
Cc: linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-mmc@...r.kernel.org,
linux-gpio@...r.kernel.org,
Alexandre Bailon <abailon@...libre.com>,
Fabien Parent <fparent@...libre.com>,
Amjad Ouled-Ameur <aouledameur@...libre.com>,
Alexandre Mergnat <amergnat@...libre.com>
Subject: [PATCH v3 11/17] arm64: dts: mediatek: add usb controller support
for mt8365-evk
This patch add support for SuperSpeed USB, in OTG mode, on micro connector.
It also add support for the Extensible Host Controller Interface USB.
Signed-off-by: Alexandre Mergnat <amergnat@...libre.com>
---
arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
index 22ec332fe9c9..868ee0d160e4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -319,6 +319,28 @@ &pwm {
status = "okay";
};
+&ssusb {
+ pinctrl-0 = <&usb_pins>;
+ pinctrl-names = "default";
+ maximum-speed = "high-speed";
+ usb-role-switch;
+ dr_mode = "otg";
+ vusb33-supply = <&mt6357_vusb33_reg>;
+ status = "okay";
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_otg_vbus>;
+ };
+};
+
+&usb_host {
+ vusb33-supply = <&mt6357_vusb33_reg>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
--
2.25.1
Powered by blists - more mailing lists