[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <67af041d-cce5-8c3b-e979-7b95a6a7a149@collabora.com>
Date: Wed, 29 Mar 2023 15:24:27 +0200
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Alexandre Mergnat <amergnat@...libre.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Wenbin Mei <wenbin.mei@...iatek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Zhiyong Tao <zhiyong.tao@...iatek.com>,
Bernhard Rosenkränzer <bero@...libre.com>
Cc: linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-mmc@...r.kernel.org,
linux-gpio@...r.kernel.org,
Alexandre Bailon <abailon@...libre.com>,
Fabien Parent <fparent@...libre.com>,
Amjad Ouled-Ameur <aouledameur@...libre.com>
Subject: Re: [PATCH v3 09/17] arm64: dts: mediatek: add mmc support for
mt8365-evk
Il 29/03/23 10:54, Alexandre Mergnat ha scritto:
> - Add EMMC support on mmc0 (internal memory)
> - Add SD-UHS support on mmc1 (external memory)
>
> Signed-off-by: Alexandre Mergnat <amergnat@...libre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 138 ++++++++++++++++++++++++++++
> 1 file changed, 138 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> index 2f88562c638a..b5d018686cbe 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -97,6 +97,42 @@ &i2c0 {
> #size-cells = <0>;
> };
>
> +&mmc0 {
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_default_pins>;
> + pinctrl-1 = <&mmc0_uhs_pins>;
> + bus-width = <8>;
> + max-frequency = <200000000>;
> + cap-mmc-highspeed;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + cap-mmc-hw-reset;
> + no-sdio;
> + no-sd;
> + hs400-ds-delay = <0x12012>;
> + vmmc-supply = <&mt6357_vemc_reg>;
> + vqmmc-supply = <&mt6357_vio18_reg>;
> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
> + non-removable;
That's a bit messy :-)
Can we please reorder this by name?
assigned-clocks....
bus-width
cap....
hs400-ds-delay
max...
mmc-hs...
no...
non-rem...
pinctrl...
vxxxx-supply
status ....
...Actually the same comment also applies to mmc1.
Cheers,
Angelo
Powered by blists - more mailing lists