| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d42c8881-72f3-dbce-f1ea-5ba998f7427c@kernel.org>
Date: Thu, 30 Mar 2023 18:06:00 +0300
From: Roger Quadros <rogerq@...nel.org>
To: Md Danish Anwar <a0501179@...com>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
MD Danish Anwar <danishanwar@...com>
Cc: "Andrew F. Davis" <afd@...com>, Suman Anna <s-anna@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Santosh Shilimkar <ssantosh@...nel.org>,
Nishanth Menon <nm@...com>, linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, srk@...com, devicetree@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add
pruss_cfg_read()/update() API
On 30/03/2023 13:00, Md Danish Anwar wrote:
> Hi Mathieu,
>
> On 28/03/23 02:31, Mathieu Poirier wrote:
>> On Thu, Mar 23, 2023 at 11:54:49AM +0530, MD Danish Anwar wrote:
>>> From: Suman Anna <s-anna@...com>
>>>
>>> Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
>>> the PRUSS platform driver to read and program respectively a register
>>> within the PRUSS CFG sub-module represented by a syscon driver.
>>>
>>> These APIs are internal to PRUSS driver. Various useful registers
>>> and macros for certain register bit-fields and their values have also
>>> been added.
>>>
>>> Signed-off-by: Suman Anna <s-anna@...com>
>>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
>>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
>>> Signed-off-by: Puranjay Mohan <p-mohan@...com>
>>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>>> ---
>>> drivers/soc/ti/pruss.c | 1 +
>>> drivers/soc/ti/pruss.h | 112 +++++++++++++++++++++++++++++++++++++++++
>>> 2 files changed, 113 insertions(+)
>>> create mode 100644 drivers/soc/ti/pruss.h
>>>
>>
>> This patch doesn't compile without warnings.
>>
>
> I checked the warnings. Below are the warnings that I am getting for these patch.
>
> In file included from drivers/soc/ti/pruss.c:24:
> drivers/soc/ti/pruss.h:103:12: warning: ‘pruss_cfg_update’ defined but not used
> [-Wunused-function]
> 103 | static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
> | ^~~~~~~~~~~~~~~~
> drivers/soc/ti/pruss.h:84:12: warning: ‘pruss_cfg_read’ defined but not used
> [-Wunused-function]
> 84 | static int pruss_cfg_read(struct pruss *pruss, unsigned int reg,
> unsigned int *val)
>
> These warnings are coming because pruss_cfg_read() / update() APIs are
> introduced in this patch but they are used later.
>
> One way to resolve this warning is to make this API "inline". I compiled after
> making these APIs inline, it got compiled without any warnings.
>
> The other solution is to merge a user API of these APIs in this patch. Patch 4
> and 5 introduces some APIs that uses pruss_cfg_read() / update() APIs. If we
> squash patch 5 (as patch 5 uses both read() and update() APIs where as patch 4
> only uses update() API) with this patch and make it a single patch where
> pruss_cfg_read() / update() is introduced as well as used, then this warning
> will be resolved.
>
> I still think making these APIs "inline" is a better option as these APIs
> implement very simple one line logic and can be made inline.
>
> Please let me know what do you think and which approach sounds better.
You should squash this patch with the next one.
>
>
>>> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
>>> index 126b672b9b30..2fa7df667592 100644
>>> --- a/drivers/soc/ti/pruss.c
>>> +++ b/drivers/soc/ti/pruss.c
>>> @@ -21,6 +21,7 @@
>>> #include <linux/regmap.h>
>>> #include <linux/remoteproc.h>
>>> #include <linux/slab.h>
>>> +#include "pruss.h"
>>>
>>> /**
>>> * struct pruss_private_data - PRUSS driver private data
>>> diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h
>>> new file mode 100644
>>> index 000000000000..4626d5f6b874
>>> --- /dev/null
>>> +++ b/drivers/soc/ti/pruss.h
>>> @@ -0,0 +1,112 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>> +/*
>>> + * PRU-ICSS Subsystem user interfaces
>>> + *
>>> + * Copyright (C) 2015-2023 Texas Instruments Incorporated - http://www.ti.com
>>> + * MD Danish Anwar <danishanwar@...com>
>>> + */
>>> +
>>> +#ifndef _SOC_TI_PRUSS_H_
>>> +#define _SOC_TI_PRUSS_H_
>>> +
>>> +#include <linux/bits.h>
>>> +#include <linux/regmap.h>
>>> +
>>> +/*
>>> + * PRU_ICSS_CFG registers
>>> + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
>>> + */
>>> +#define PRUSS_CFG_REVID 0x00
>>> +#define PRUSS_CFG_SYSCFG 0x04
>>> +#define PRUSS_CFG_GPCFG(x) (0x08 + (x) * 4)
>>> +#define PRUSS_CFG_CGR 0x10
>>> +#define PRUSS_CFG_ISRP 0x14
>>> +#define PRUSS_CFG_ISP 0x18
>>> +#define PRUSS_CFG_IESP 0x1C
>>> +#define PRUSS_CFG_IECP 0x20
>>> +#define PRUSS_CFG_SCRP 0x24
>>> +#define PRUSS_CFG_PMAO 0x28
>>> +#define PRUSS_CFG_MII_RT 0x2C
>>> +#define PRUSS_CFG_IEPCLK 0x30
>>> +#define PRUSS_CFG_SPP 0x34
>>> +#define PRUSS_CFG_PIN_MX 0x40
>>> +
>>> +/* PRUSS_GPCFG register bits */
>>> +#define PRUSS_GPCFG_PRU_GPO_SH_SEL BIT(25)
>>> +
>>> +#define PRUSS_GPCFG_PRU_DIV1_SHIFT 20
>>> +#define PRUSS_GPCFG_PRU_DIV1_MASK GENMASK(24, 20)
>>> +
>>> +#define PRUSS_GPCFG_PRU_DIV0_SHIFT 15
>>> +#define PRUSS_GPCFG_PRU_DIV0_MASK GENMASK(15, 19)
>>> +
>>> +#define PRUSS_GPCFG_PRU_GPO_MODE BIT(14)
>>> +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT 0
>>> +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL BIT(14)
>>> +
>>> +#define PRUSS_GPCFG_PRU_GPI_SB BIT(13)
>>> +
>>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT 8
>>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK GENMASK(12, 8)
>>> +
>>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT 3
>>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK GENMASK(7, 3)
>>> +
>>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE 0
>>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE BIT(2)
>>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE BIT(2)
>>> +
>>> +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK GENMASK(1, 0)
>>> +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT 0
>>> +
>>> +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT 26
>>> +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK GENMASK(29, 26)
>>> +
>>> +/* PRUSS_MII_RT register bits */
>>> +#define PRUSS_MII_RT_EVENT_EN BIT(0)
>>> +
>>> +/* PRUSS_SPP register bits */
>>> +#define PRUSS_SPP_XFER_SHIFT_EN BIT(1)
>>> +#define PRUSS_SPP_PRU1_PAD_HP_EN BIT(0)
>>> +#define PRUSS_SPP_RTU_XFR_SHIFT_EN BIT(3)
>>> +
>>> +/**
>>> + * pruss_cfg_read() - read a PRUSS CFG sub-module register
>>> + * @pruss: the pruss instance handle
>>> + * @reg: register offset within the CFG sub-module
>>> + * @val: pointer to return the value in
>>> + *
>>> + * Reads a given register within the PRUSS CFG sub-module and
>>> + * returns it through the passed-in @val pointer
>>> + *
>>> + * Return: 0 on success, or an error code otherwise
>>> + */
>>> +static int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val)
>>> +{
>>> + if (IS_ERR_OR_NULL(pruss))
>>> + return -EINVAL;
>>> +
>>> + return regmap_read(pruss->cfg_regmap, reg, val);
>>> +}
>>> +
>>> +/**
>>> + * pruss_cfg_update() - configure a PRUSS CFG sub-module register
>>> + * @pruss: the pruss instance handle
>>> + * @reg: register offset within the CFG sub-module
>>> + * @mask: bit mask to use for programming the @val
>>> + * @val: value to write
>>> + *
>>> + * Programs a given register within the PRUSS CFG sub-module
>>> + *
>>> + * Return: 0 on success, or an error code otherwise
>>> + */
>>> +static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
>>> + unsigned int mask, unsigned int val)
>>> +{
>>> + if (IS_ERR_OR_NULL(pruss))
>>> + return -EINVAL;
>>> +
>>> + return regmap_update_bits(pruss->cfg_regmap, reg, mask, val);
>>> +}
>>> +
>>> +#endif /* _SOC_TI_PRUSS_H_ */
>>> --
>>> 2.25.1
>>>
>
--
cheers,
-roger
Powered by blists - more mailing lists