[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230330084954.49763-3-rogerq@kernel.org>
Date: Thu, 30 Mar 2023 11:49:53 +0300
From: Roger Quadros <rogerq@...nel.org>
To: nm@...com, vigneshr@...com
Cc: kristo@...nel.org, srk@...com, r-gunasekaran@...com,
linux-arm-kernel@...ts.infradead.org, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Roger Quadros <rogerq@...nel.org>
Subject: [PATCH v3 2/3] arm64: dts: ti: k3-am625: Enable Type-C port for USB0
USB0 is a Type-C port with dual data role and power sink.
Signed-off-by: Roger Quadros <rogerq@...nel.org>
---
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 2 +-
.../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 35 ++++++++++++++++++-
2 files changed, 35 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index cdc0858dd1b2..467e17e28916 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -150,7 +150,7 @@ exp1: gpio@22 {
"UART1_FET_BUF_EN", "WL_LT_EN",
"GPIO_HDMI_RSTn", "CSI_GPIO1",
"CSI_GPIO2", "PRU_3V3_EN",
- "HDMI_INTn", "TEST_GPIO2",
+ "HDMI_INTn", "PD_I2C_IRQ",
"MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
"MCASP1_FET_SEL", "UART1_FET_SEL",
"TSINT#", "IO_EXP_TEST_LED";
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 80e8b9b9a5f5..db7fa20e8fe2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -198,6 +198,30 @@ &main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
+
+ typec_pd0: tps6598x@3f {
+ compatible = "ti,tps6598x";
+ reg = <0x3f>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ self-powered;
+ data-role = "dual";
+ power-role = "sink";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_hs: endpoint {
+ remote-endpoint = <&usb0_hs_ep>;
+ };
+ };
+ };
+ };
+ };
};
&main_i2c1 {
@@ -265,7 +289,16 @@ &usbss1 {
};
&usb0 {
- dr_mode = "peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ usb-role-switch;
+
+ port@0 {
+ reg = <0>;
+ usb0_hs_ep: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
};
&usb1 {
--
2.34.1
Powered by blists - more mailing lists