[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230330025058.sum2yq2yaufxevfy@giver>
Date: Wed, 29 Mar 2023 21:50:58 -0500
From: Nishanth Menon <nm@...com>
To: Jai Luthra <j-luthra@...com>
CC: Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Aradhya Bhatia <a-bhatia1@...com>,
Devarsh Thakkar <devarsht@...com>,
Jayesh Choudhary <j-choudhary@...com>,
Andrew Davis <afd@...com>
Subject: Re: [PATCH v9 6/6] arm64: dts: ti: k3-am62a7-sk: Enable audio on
AM62A
On 16:01-20230329, Jai Luthra wrote:
> Add nodes for audio codec and sound card, enable the audio serializer
> (McASP1) under use and update pinmux.
>
> The codec (TLV320AIC3106) is also supplied with a DVDD 1.8V supply from
> the PMIC (TPS6593x) on the SK. [1] As the PMIC driver and devicetree
> node is missing, skip describing DVDD for now and manually set the OCMV
> voltage.
Please drop the am62a7 series from this patch series. once you add PMIC
device tree property, then lets add the dvdd properly rather than
reworking this again.
>
> Link: https://www.ti.com/lit/zip/sprr459 [1]
> Signed-off-by: Jai Luthra <j-luthra@...com>
> Reviewed-by: Jayesh Choudhary <j-choudhary@...com>
> ---
> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 77 +++++++++++++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index 2296d656323c..8d7087e5f9e4 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -123,6 +123,41 @@ led-0 {
> default-state = "off";
> };
> };
> +
> + tlv320_mclk: clk-0 {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <12288000>;
> + };
> +
> + codec_audio: sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "AM62Ax-SKEVM";
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack",
> + "Line", "Line In",
> + "Microphone", "Microphone Jack";
> + simple-audio-card,routing =
> + "Headphone Jack", "HPLOUT",
> + "Headphone Jack", "HPROUT",
> + "LINE1L", "Line In",
> + "LINE1R", "Line In",
> + "MIC3R", "Microphone Jack",
> + "Microphone Jack", "Mic Bias";
> + simple-audio-card,format = "dsp_b";
> + simple-audio-card,bitclock-master = <&sound_master>;
> + simple-audio-card,frame-master = <&sound_master>;
> + simple-audio-card,bitclock-inversion;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&mcasp1>;
> + };
> +
> + sound_master: simple-audio-card,codec {
> + sound-dai = <&tlv320aic3106>;
> + clocks = <&tlv320_mclk>;
> + };
> + };
> };
>
> &main_pmx0 {
> @@ -201,6 +236,15 @@ AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
> AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
> >;
> };
> +
> + main_mcasp1_pins_default: main-mcasp1-pins-default {
> + pinctrl-single,pins = <
> + AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19) GPMC0_BE0n_CLE.MCASP1_ACLKX */
> + AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18) GPMC0_WAIT0.MCASP1_AFSX */
> + AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19) GPMC0_WEn.MCASP1_AXR0 */
> + AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
> + >;
> + };
> };
>
> &main_i2c0 {
> @@ -235,6 +279,19 @@ exp1: gpio@22 {
> "MCASP1_FET_SEL", "UART1_FET_SEL",
> "PD_I2C_IRQ", "IO_EXP_TEST_LED";
> };
> +
> + tlv320aic3106: audio-codec@1b {
> + #sound-dai-cells = <0>;
> + compatible = "ti,tlv320aic3106";
> + reg = <0x1b>;
> + ai3x-micbias-vg = <1>; /* 2.0V */
> + ai3x-ocmv = <1>; /* 1.5V */
> +
> + /* Regulators */
> + AVDD-supply = <&vcc_3v3_sys>;
> + IOVDD-supply = <&vcc_3v3_sys>;
> + DRVDD-supply = <&vcc_3v3_sys>;
> + };
> };
>
> &sdhci1 {
> @@ -303,3 +360,23 @@ cpsw3g_phy0: ethernet-phy@0 {
> ti,min-output-impedance;
> };
> };
> +
> +&mcasp1 {
> + status = "okay";
> + #sound-dai-cells = <0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mcasp1_pins_default>;
> +
> + op-mode = <0>; /* MCASP_IIS_MODE */
> + tdm-slots = <2>;
> +
> + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> + 1 0 2 0
> + 0 0 0 0
> + 0 0 0 0
> + 0 0 0 0
> + >;
> + tx-num-evt = <32>;
> + rx-num-evt = <32>;
> +};
>
> --
> 2.40.0
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Powered by blists - more mailing lists