| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230331091145.737305-8-treapking@chromium.org>
Date: Fri, 31 Mar 2023 17:11:42 +0800
From: Pin-yen Lin <treapking@...omium.org>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Daniel Scally <djrscally@...il.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J . Wysocki" <rafael@...nel.org>,
Prashant Malani <pmalani@...omium.org>,
Benson Leung <bleung@...omium.org>,
Guenter Roeck <groeck@...omium.org>
Cc: Xin Ji <xji@...logixsemi.com>, Marek Vasut <marex@...x.de>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Lyude Paul <lyude@...hat.com>, devicetree@...r.kernel.org,
Stephen Boyd <swboyd@...omium.org>,
dri-devel@...ts.freedesktop.org, linux-acpi@...r.kernel.org,
chrome-platform@...ts.linux.dev,
Nícolas F . R . A . Prado
<nfraprado@...labora.com>,
Javier Martinez Canillas <javierm@...hat.com>,
Pin-yen Lin <treapking@...omium.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH v15 07/10] drm/bridge: anx7625: Register Type C mode switches
Register USB Type-C mode switches when the "mode-switch" property and
relevant ports are available in Device Tree. Configure the crosspoint
switch based on the entered alternate mode for a specific Type-C
connector.
Crosspoint switch can also be used for switching the output signal for
different orientations of a single USB Type-C connector, but the
orientation switch is not implemented yet. A TODO is added for this.
Signed-off-by: Pin-yen Lin <treapking@...omium.org>
---
Changes in v15:
- Swap the definitions in anx7625_typec_port_data
- Add comments about the completion
- Abort the mux_set callback when the switch is unregistered
- Fix style issues
Changes in v14:
- Fix style issues
Changes in v12:
- Fixed style issues in anx7625 driver
- Fixed the inverted orientation setting in anx7625 driver
- Changed "&ctx->client->dev" to "ctx->dev"
- Fix style issues
- Updated the error logs when parsing data-lanes property
Changes in v11:
- Added back "data-lanes" parsing logics
- Removed Kconfig dependency
- Updated the usage of the private data
- Dropped Tested-by tag because of the new changes
Changes in v10:
- Added a TODO for implementing orientation switch for anx7625
- Updated the commit message for the absence of orientation switch
- Fixed typo in the commit message
- Collected Tested-by tag
Changes in v7:
- Fixed style issues in anx7625 driver
- Removed DT property validation in anx7625 driver.
- Extracted common codes to another commit.
Changes in v6:
- Squashed to a single patch
drivers/gpu/drm/bridge/analogix/anx7625.c | 157 ++++++++++++++++++++++
drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +++
2 files changed, 177 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 76d46db3f8dc..7ed5797e134c 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -15,6 +15,8 @@
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
#include <linux/workqueue.h>
#include <linux/of_gpio.h>
@@ -2570,6 +2572,154 @@ static void anx7625_runtime_disable(void *data)
pm_runtime_disable(data);
}
+static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
+ enum typec_orientation orientation)
+{
+ if (orientation == TYPEC_ORIENTATION_NORMAL) {
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+ SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+ SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
+ } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+ SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
+ anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+ SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
+ }
+}
+
+static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
+{
+ unsigned int i;
+
+ /* Check if both ports available and do nothing to retain the current one */
+ if (ctx->port_data[0].dp_connected && ctx->port_data[1].dp_connected)
+ return;
+
+ for (i = 0; i < 2; i++) {
+ if (ctx->port_data[i].dp_connected)
+ anx7625_set_crosspoint_switch(ctx,
+ ctx->port_data[i].orientation);
+ }
+}
+
+static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
+ struct typec_mux_state *state)
+{
+ struct drm_dp_typec_port_data *port = typec_mux_get_drvdata(mux);
+ struct anx7625_data *ctx = port->data;
+ struct device *dev = ctx->dev;
+ struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
+ bool new_dp_connected, old_dp_connected;
+
+ if (switch_desc.num_typec_switches == 1)
+ return 0;
+
+ /*
+ * The completion is called in anx7625_register_typec_switches
+ * even on errors, so it's safe to wait for completion without timeout.
+ */
+ wait_for_completion(&ctx->mux_register);
+
+ /* Abort when the switches are unregistered. */
+ if (!ctx->port_data)
+ return -EINVAL;
+
+ old_dp_connected = ctx->port_data[0].dp_connected ||
+ ctx->port_data[1].dp_connected;
+
+ ctx->port_data[port->port_num].dp_connected =
+ state->alt &&
+ state->alt->svid == USB_TYPEC_DP_SID &&
+ state->alt->mode == USB_TYPEC_DP_MODE;
+
+ dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
+ ctx->port_data[0].dp_connected, ctx->port_data[1].dp_connected);
+
+ new_dp_connected = ctx->port_data[0].dp_connected ||
+ ctx->port_data[1].dp_connected;
+
+ /* DP on, power on first */
+ if (!old_dp_connected && new_dp_connected)
+ pm_runtime_get_sync(dev);
+
+ anx7625_typec_two_ports_update(ctx);
+
+ /* DP off, power off last */
+ if (old_dp_connected && !new_dp_connected)
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static void anx7625_unregister_typec_switches(struct anx7625_data *ctx)
+{
+ drm_dp_unregister_typec_switches(&ctx->switch_desc);
+ ctx->port_data = NULL;
+}
+
+static int anx7625_register_typec_switches(struct device *dev, struct anx7625_data *ctx)
+{
+ struct device_node *port_node = of_graph_get_port_by_id(dev->of_node, 1);
+ struct drm_dp_typec_switch_desc *switch_desc = &ctx->switch_desc;
+ int ret;
+ u32 dp_lanes[4];
+ unsigned int i, num_lanes;
+
+ /*
+ * Currently, only mode switch is implemented.
+ * TODO: Implement Type-C orientation switch for anx7625.
+ */
+ ret = drm_dp_register_typec_switches(dev, &port_node->fwnode,
+ &ctx->switch_desc, ctx,
+ anx7625_typec_mux_set);
+ if (ret)
+ return ret;
+
+ ctx->port_data = devm_kcalloc(dev, switch_desc->num_typec_switches,
+ sizeof(*ctx->port_data),
+ GFP_KERNEL);
+ if (!ctx->port_data) {
+ ret = -ENOMEM;
+ goto unregister_mux;
+ }
+
+ for (i = 0; i < switch_desc->num_typec_switches; i++) {
+ struct drm_dp_typec_port_data *port = &switch_desc->typec_ports[i];
+ struct fwnode_handle *fwnode = port->fwnode;
+
+ ret = fwnode_property_count_u32(fwnode, "data-lanes");
+ if (ret < 0) {
+ dev_err(dev,
+ "Error on getting data lanes count from %pfwP: %d\n",
+ fwnode, ret);
+ goto unregister_mux;
+ }
+ num_lanes = ret;
+
+ ret = fwnode_property_read_u32_array(fwnode, "data-lanes",
+ dp_lanes, num_lanes);
+ if (ret) {
+ dev_err(dev,
+ "Failed to read the data-lanes variable: %d\n",
+ ret);
+ goto unregister_mux;
+ }
+
+ ctx->port_data[i].orientation = dp_lanes[0] < 2 ?
+ TYPEC_ORIENTATION_REVERSE : TYPEC_ORIENTATION_NORMAL;
+ ctx->port_data[i].dp_connected = false;
+ }
+ complete_all(&ctx->mux_register);
+
+ return 0;
+
+unregister_mux:
+ anx7625_unregister_typec_switches(ctx);
+ complete_all(&ctx->mux_register);
+ return ret;
+}
+
static int anx7625_i2c_probe(struct i2c_client *client)
{
struct anx7625_data *platform;
@@ -2607,6 +2757,7 @@ static int anx7625_i2c_probe(struct i2c_client *client)
mutex_init(&platform->lock);
mutex_init(&platform->hdcp_wq_lock);
+ init_completion(&platform->mux_register);
INIT_DELAYED_WORK(&platform->hdcp_work, hdcp_check_work_func);
platform->hdcp_workqueue = create_workqueue("hdcp workqueue");
@@ -2677,6 +2828,10 @@ static int anx7625_i2c_probe(struct i2c_client *client)
if (platform->pdata.intp_irq)
queue_work(platform->workqueue, &platform->work);
+ ret = anx7625_register_typec_switches(dev, platform);
+ if (ret && ret != -ENODEV)
+ dev_warn(dev, "Didn't register Type-C switches, err: %d\n", ret);
+
platform->bridge.funcs = &anx7625_bridge_funcs;
platform->bridge.of_node = client->dev.of_node;
if (!anx7625_of_panel_on_aux_bus(&client->dev))
@@ -2728,6 +2883,8 @@ static void anx7625_i2c_remove(struct i2c_client *client)
drm_bridge_remove(&platform->bridge);
+ anx7625_unregister_typec_switches(platform);
+
if (platform->pdata.intp_irq)
destroy_workqueue(platform->workqueue);
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 5af819611ebc..291dba62e096 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -55,6 +55,18 @@
#define HPD_STATUS_CHANGE 0x80
#define HPD_STATUS 0x80
+#define TCPC_SWITCH_0 0xB4
+#define SW_SEL1_DPTX0_RX2 BIT(0)
+#define SW_SEL1_DPTX0_RX1 BIT(1)
+#define SW_SEL1_SSRX_RX2 BIT(4)
+#define SW_SEL1_SSRX_RX1 BIT(5)
+
+#define TCPC_SWITCH_1 0xB5
+#define SW_SEL2_DPTX1_TX2 BIT(0)
+#define SW_SEL2_DPTX1_TX1 BIT(1)
+#define SW_SEL2_SSTX_TX2 BIT(4)
+#define SW_SEL2_SSTX_TX1 BIT(5)
+
/******** END of I2C Address 0x58 ********/
/***************************************************************/
@@ -449,6 +461,11 @@ struct anx7625_i2c_client {
struct i2c_client *tcpc_client;
};
+struct anx7625_typec_port_data {
+ enum typec_orientation orientation;
+ bool dp_connected;
+};
+
struct anx7625_data {
struct anx7625_platform_data pdata;
struct platform_device *audio_pdev;
@@ -479,6 +496,9 @@ struct anx7625_data {
struct drm_connector *connector;
struct mipi_dsi_device *dsi;
struct drm_dp_aux aux;
+ struct completion mux_register;
+ struct drm_dp_typec_switch_desc switch_desc;
+ struct anx7625_typec_port_data *port_data;
};
#endif /* __ANX7625_H__ */
--
2.40.0.348.gf938b09366-goog
Powered by blists - more mailing lists