linux-kernel - [PATCH v4 1/6] dts: arm64: qcom: sdm845: add SLPI remoteproc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230401173523.15244-2-me@dylanvanassche.be>
Date:   Sat,  1 Apr 2023 19:35:18 +0200
From:   Dylan Van Assche <me@...anvanassche.be>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     Konrad Dybcio <konrad.dybcio@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
        Dylan Van Assche <me@...anvanassche.be>
Subject: [PATCH v4 1/6] dts: arm64: qcom: sdm845: add SLPI remoteproc

Add the SLPI remoteproc to the SDM845 Qualcomm SoC which is responsible
for exposing the sensors connected to the SoC. The SLPI communicates
over GLink edge 'dsps' and is similar to other DSPs e.g. ADSP or CDSP.
This patch allows the SLPI to boot and expose itself over QRTR as
service 400.

Signed-off-by: Dylan Van Assche <me@...anvanassche.be>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 36 ++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2f32179c7d1b..338a715d110a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3325,6 +3325,42 @@ gpucc: clock-controller@...0000 {
 				      "gcc_gpu_gpll0_div_clk_src";
 		};
 
+		slpi_pas: remoteproc@...0000 {
+			compatible = "qcom,sdm845-slpi-pas";
+			reg = <0 0x5c00000 0 0x4000>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+						"handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			power-domains = <&rpmhpd SDM845_CX>,
+					<&rpmhpd SDM845_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+			};
+		};
+
 		stm@...2000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0 0x06002000 0 0x1000>,
-- 
2.39.2