| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d279d2fa-e255-1e43-780c-6bdac437469d@linaro.org>
Date: Mon, 3 Apr 2023 21:50:10 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>,
Luca Weiss <luca.weiss@...rphone.com>,
Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
Rob Herring <robh@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>
Subject: Re: [PATCH 4/5] arm64: dts: qcom: sm6350: Add GPU nodes
On 18/03/2023 15:45, Konrad Dybcio wrote:
>
>
> On 17.03.2023 09:56, Luca Weiss wrote:
>> On Thu Mar 16, 2023 at 12:16 PM CET, Konrad Dybcio wrote:
>>> From: Konrad Dybcio <konrad.dybcio@...ainline.org>
>>>
>>> Add Adreno, GPU SMMU and GMU nodes to hook up everything that
>>> the A619 needs to function properly.
>>>
>>> Co-developed-by: Luca Weiss <luca.weiss@...rphone.com>
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>>> ---
> [...]
>
>> What about adding interconnect already? I also have opp-peak-kBps
>> additions in the opp table for that. I'll attach the diff I have at the
>> end of the email.
> I believe the GMU takes care of it internally (or at least should)
> with the bandwidth tables we send in a6xx_hfi.c : a6xx_hfi_send_bw_table()
We should still declare the interconnects. If at some point we attempt
to fill these tables in a proper way, the interconnects will be required
to get addresses of the nodes.
>
>
> [...]
>
>>>
>>> + adreno_smmu: iommu@...0000 {
>>
>> This and gmu should be above gpucc @3d90000?
> Absolutely.
>
> Konrad
>>
>>> + compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
>>> + reg = <0 0x03d40000 0 0x10000>;
>>> + #iommu-cells = <1>;
>>> + #global-interrupts = <2>;
>>> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
>>> +
>>> + clocks = <&gpucc GPU_CC_AHB_CLK>,
>>> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>>> + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
>>> + clock-names = "ahb",
>>> + "bus",
>>> + "iface";
>>> +
>>> + power-domains = <&gpucc GPU_CX_GDSC>;
>>> + };
>>> +
>>> + gmu: gmu@...a000 {
>>> + compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu";
>>> + reg = <0 0x03d6a000 0 0x31000>,
>>> + <0 0x0b290000 0 0x10000>,
>>> + <0 0x0b490000 0 0x10000>;
>>> + reg-names = "gmu",
>>> + "gmu_pdc",
>>> + "gmu_pdc_seq";
>>> +
>>> + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "hfi",
>>> + "gmu";
>>> +
>>> + clocks = <&gpucc GPU_CC_AHB_CLK>,
>>> + <&gpucc GPU_CC_CX_GMU_CLK>,
>>> + <&gpucc GPU_CC_CXO_CLK>,
>>> + <&gcc GCC_DDRSS_GPU_AXI_CLK>,
>>> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
>>> + clock-names = "ahb",
>>> + "gmu",
>>> + "cxo",
>>> + "axi",
>>> + "memnoc";
>>> +
>>> + power-domains = <&gpucc GPU_CX_GDSC>,
>>> + <&gpucc GPU_GX_GDSC>;
>>> + power-domain-names = "cx",
>>> + "gx";
>>> +
>>> + iommus = <&adreno_smmu 5>;
>>> +
>>> + operating-points-v2 = <&gmu_opp_table>;
>>> +
>>> + status = "disabled";
>>> +
>>> + gmu_opp_table: opp-table {
>>> + compatible = "operating-points-v2";
>>> +
>>> + opp-200000000 {
>>> + opp-hz = /bits/ 64 <200000000>;
>>> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>> + };
>>> + };
>>> + };
>>> +
>>> mpss: remoteproc@...0000 {
>>> compatible = "qcom,sm6350-mpss-pas";
>>> reg = <0x0 0x04080000 0x0 0x4040>;
>>>
>>> --
>>> 2.39.2
>>
>> Here's the diff I have for interconnect on top of this:
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> index 4954cbc2c0fc..51c5ac679a32 100644
>> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> @@ -1142,6 +1142,8 @@ gpu: gpu@...0000 {
>> iommus = <&adreno_smmu 0>;
>> operating-points-v2 = <&gpu_opp_table>;
>> qcom,gmu = <&gmu>;
>> + interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &clk_virt SLAVE_EBI_CH0 0>;
>> + interconnect-names = "gfx-mem";
>> nvmem-cells = <&gpu_speed_bin>;
>> nvmem-cell-names = "speed_bin";
>>
>> @@ -1157,42 +1159,49 @@ gpu_opp_table: opp-table {
>> opp-850000000 {
>> opp-hz = /bits/ 64 <850000000>;
>> opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>> + opp-peak-kBps = <8371200>;
>> opp-supported-hw = <0x02>;
>> };
>>
>> opp-800000000 {
>> opp-hz = /bits/ 64 <800000000>;
>> opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>> + opp-peak-kBps = <8371200>;
>> opp-supported-hw = <0x04>;
>> };
>>
>> opp-650000000 {
>> opp-hz = /bits/ 64 <650000000>;
>> opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>> + opp-peak-kBps = <6220000>;
>> opp-supported-hw = <0x08>;
>> };
>>
>> opp-565000000 {
>> opp-hz = /bits/ 64 <565000000>;
>> opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>> + opp-peak-kBps = <5412000>;
>> opp-supported-hw = <0x10>;
>> };
>>
>> opp-430000000 {
>> opp-hz = /bits/ 64 <430000000>;
>> opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>> + opp-peak-kBps = <4068000>;
>> opp-supported-hw = <0xff>;
>> };
>>
>> opp-355000000 {
>> opp-hz = /bits/ 64 <355000000>;
>> opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>> + opp-peak-kBps = <3072000>;
>> opp-supported-hw = <0xff>;
>> };
>>
>> opp-253000000 {
>> opp-hz = /bits/ 64 <253000000>;
>> opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> + opp-peak-kBps = <2188000>;
>> opp-supported-hw = <0xff>;
>> };
>> };
>>
--
With best wishes
Dmitry
Powered by blists - more mailing lists