| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230403202307.120562-6-sebastian.reichel@collabora.com>
Date: Mon, 3 Apr 2023 22:23:05 +0200
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Heiko Stuebner <heiko@...ech.de>, linux-phy@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Sebastian Reichel <sebastian.reichel@...labora.com>,
kernel@...labora.com
Subject: [PATCHv2 5/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support
On RK3588 some registers need to be tweaked to support waking up from
suspend when a USB device is plugged into a port from a suspended PHY.
Without this change USB devices only work when they are plugged at
boot time.
Apart from that it optimizes settings to avoid devices toggling
between fullspeed and highspeed mode.
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 63 +++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 3a78c5bf11d4..9f6d09da7fbd 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -33,6 +33,8 @@
#define SCHEDULE_DELAY (60 * HZ)
#define OTG_SCHEDULE_DELAY (2 * HZ)
+struct rockchip_usb2phy;
+
enum rockchip_usb2phy_port_id {
USB2PHY_PORT_OTG,
USB2PHY_PORT_HOST,
@@ -163,6 +165,7 @@ struct rockchip_usb2phy_port_cfg {
* struct rockchip_usb2phy_cfg - usb-phy configuration.
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
+ * @phy_tuning: phy default parameters tuning.
* @clkout_ctl: keep on/turn off output clk of phy.
* @port_cfgs: usb-phy port configurations.
* @chg_det: charger detection registers.
@@ -170,6 +173,7 @@ struct rockchip_usb2phy_port_cfg {
struct rockchip_usb2phy_cfg {
unsigned int reg;
unsigned int num_ports;
+ int (*phy_tuning)(struct rockchip_usb2phy *rphy);
struct usb2phy_reg clkout_ctl;
const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
const struct rockchip_chg_det_reg chg_det;
@@ -1400,6 +1404,12 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
goto disable_clks;
}
+ if (rphy->phy_cfg->phy_tuning) {
+ ret = rphy->phy_cfg->phy_tuning(rphy);
+ if (ret)
+ goto disable_clks;
+ }
+
index = 0;
for_each_available_child_of_node(np, child_np) {
struct rockchip_usb2phy_port *rport = &rphy->ports[index];
@@ -1468,6 +1478,55 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
return ret;
}
+static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
+{
+ int ret = 0;
+ bool usb3otg = false;
+ /*
+ * utmi_termselect = 1'b1 (en FS terminations)
+ * utmi_xcvrselect = 2'b01 (FS transceiver)
+ */
+ int suspend_cfg = 0x14;
+
+ if (rphy->phy_cfg->reg == 0x0000 || rphy->phy_cfg->reg == 0x4000) {
+ /* USB2 config for USB3_0 and USB3_1 */
+ suspend_cfg |= 0x01; /* utmi_opmode = 2'b01 (no-driving) */
+ usb3otg = true;
+ } else if (rphy->phy_cfg->reg == 0x8000 || rphy->phy_cfg->reg == 0xc000) {
+ /* USB2 config for USB2_0 and USB2_1 */
+ suspend_cfg |= 0x00; /* utmi_opmode = 2'b00 (normal) */
+ } else {
+ return -EINVAL;
+ }
+
+ /* Deassert SIDDQ to power on analog block */
+ ret = regmap_write(rphy->grf, 0x0008, GENMASK(29, 29) | 0x0000);
+ if (ret)
+ return ret;
+
+ /* Do reset after exit IDDQ mode */
+ ret = rockchip_usb2phy_reset(rphy);
+ if (ret)
+ return ret;
+
+ /* suspend configuration */
+ ret |= regmap_write(rphy->grf, 0x000c, GENMASK(20, 16) | suspend_cfg);
+
+ /* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
+ ret |= regmap_write(rphy->grf, 0x0004, GENMASK(27, 24) | 0x0900);
+
+ /* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
+ ret |= regmap_write(rphy->grf, 0x0008, GENMASK(20, 19) | 0x0010);
+
+ if (!usb3otg)
+ return ret;
+
+ /* Pullup iddig pin for USB3_0 OTG mode */
+ ret |= regmap_write(rphy->grf, 0x0010, GENMASK(17, 16) | 0x0003);
+
+ return ret;
+}
+
static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
{
.reg = 0x760,
@@ -1785,6 +1844,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
{
.reg = 0x0000,
.num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
.clkout_ctl = { 0x0000, 0, 0, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_OTG] = {
@@ -1821,6 +1881,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
{
.reg = 0x4000,
.num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
.clkout_ctl = { 0x0000, 0, 0, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_OTG] = {
@@ -1857,6 +1918,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
{
.reg = 0x8000,
.num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
.clkout_ctl = { 0x0000, 0, 0, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
@@ -1877,6 +1939,7 @@ static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
{
.reg = 0xc000,
.num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
.clkout_ctl = { 0x0000, 0, 0, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
--
2.39.2
Powered by blists - more mailing lists