[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5ab476ce-a1ef-871d-2eda-e8e494509f1a@loongson.cn>
Date: Mon, 3 Apr 2023 17:35:17 +0800
From: zhuyinbo <zhuyinbo@...ngson.cn>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Jianmin Lv <lvjianmin@...ngson.cn>, wanghongliang@...ngson.cn,
Liu Peibao <liupeibao@...ngson.cn>,
loongson-kernel@...ts.loongnix.cn, zhuyinbo@...ngson.cn
Subject: Re: [PATCH v6 2/2] spi: loongson: add bus driver for the loongson spi
controller
在 2023/4/2 下午6:04, Krzysztof Kozlowski 写道:
> On 01/04/2023 11:56, Yinbo Zhu wrote:
>> This bus driver supports the Loongson spi hardware controller in the
>> Loongson platforms and supports to use DTS and PCI framework to
>> register spi device resources.
>>
>> Signed-off-by: Yinbo Zhu <zhuyinbo@...ngson.cn>
>> ---
>
>
> ...
>
>> +
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/spi/spi.h>
>> +#include <linux/clk.h>
>> +#include <linux/io.h>
>> +
>> +#include "spi-loongson.h"
>> +
>> +static inline void loongson_spi_write_reg(struct loongson_spi *spi, unsigned char reg,
>> + unsigned char data)
>> +{
>> + writeb(data, spi->base + reg);
>
> This wrapper does not simplify anything.
Mark seems to have other viewpoint.
>
>> +}
>> +
>> +static inline char loongson_spi_read_reg(struct loongson_spi *spi, unsigned char reg)
>> +{
>> + return readb(spi->base + reg);
>
> Neither this one.
>
>> +}
>> +
>> +static void loongson_spi_set_cs(struct spi_device *spi, bool val)
>> +{
>> + int cs;
>> + struct loongson_spi *loongson_spi = spi_master_get_devdata(spi->master);
>> +
>
> (...)
>
>> +
>> +static int __init loongson_spi_pci_init(void)
>> +{
>> + int ret;
>> +
>> + ret = pci_register_driver(&loongson_spi_pci_driver);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static void __exit loongson_spi_pci_exit(void)
>> +{
>> + pci_unregister_driver(&loongson_spi_pci_driver);
>> +}
>> +
>> +module_init(loongson_spi_pci_init);
>> +module_exit(loongson_spi_pci_exit);
>
> module_xxx_driver?
okay, I got it.
>
>> +
>> +MODULE_DESCRIPTION("Loongson spi pci driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/spi/spi-loongson-plat.c b/drivers/spi/spi-loongson-plat.c
>> new file mode 100644
>> index 000000000000..8f4aa70168f3
>> --- /dev/null
>> +++ b/drivers/spi/spi-loongson-plat.c
>> @@ -0,0 +1,66 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +// Platform driver for Loongson SPI Support
>> +// Copyright (C) 2023 Loongson Technology Corporation Limited
>> +
>> +#include <linux/platform_device.h>
>> +#include <linux/of.h>
>> +
>> +#include "spi-loongson.h"
>> +
>> +static int loongson_spi_platform_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + int ret;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (res == NULL) {
>> + dev_err(dev, "cannot get io resource memory\n");
>> + return -ENOENT;
>> + }
>> +
>> + ret = loongson_spi_init_master(dev, res);
>> + if (ret)
>> + dev_err(dev, "failed to initialize master\n");
>> +
>> + return ret;
>> +}
>> +
>> +static const struct of_device_id loongson_spi_id_table[] = {
>> + { .compatible = "loongson,ls2k-spi", },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, loongson_spi_id_table);
>> +
>> +static struct platform_driver loongson_spi_plat_driver = {
>> + .probe = loongson_spi_platform_probe,
>> + .driver = {
>> + .name = "loongson-spi",
>> + .owner = THIS_MODULE,
>
> Really? We get rid of it years ago. I bet you did not run coccicheck,
> smatch, sparse...
okay, I got it, I will remove this line.
Thanks.
>
>> + .bus = &platform_bus_type,
>> + .pm = &loongson_spi_dev_pm_ops,
>> + .of_match_table = loongson_spi_id_table,
>> + },
>> +};
>> +
>> +static int __init loongson_spi_plat_init(void)
>> +{
>> + int ret;
>> +
>> + ret = platform_driver_register(&loongson_spi_plat_driver);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static void __exit loongson_spi_plat_exit(void)
>> +{
>> + platform_driver_unregister(&loongson_spi_plat_driver);
>> +}
>> +
>> +module_init(loongson_spi_plat_init);
>> +module_exit(loongson_spi_plat_exit);
>
> module_platform_driver.
okay, I will use it.
>
>> +
>> +MODULE_DESCRIPTION("Loongson spi platform driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/spi/spi-loongson.h b/drivers/spi/spi-loongson.h
>> new file mode 100644
>> index 000000000000..44818340188d
>> --- /dev/null
>> +++ b/drivers/spi/spi-loongson.h
>> @@ -0,0 +1,41 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/* Header File for Loongson SPI Driver. */
>> +/* Copyright (C) 2023 Loongson Technology Corporation Limited */
>> +
>> +#ifndef __LINUX_SPI_LOONGSON_H
>> +#define __LINUX_SPI_LOONGSON_H
>> +
>> +#define LOONGSON_SPI_SPCR_REG 0x00
>
> There is just one space after #define.
Mark seems to have other viewpoint.
>
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists