| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAOTY_8h0gROVKOVNrTpJGKgZhJbQ1A6EaZT+vpb5bJaYqYaFg@mail.gmail.com>
Date: Mon, 3 Apr 2023 18:15:53 +0800
From: Chun-Kuang Hu <chunkuang.hu@...nel.org>
To: Julien Stephan <jstephan@...libre.com>
Cc: Phi-bang Nguyen <pnguyen@...libre.com>,
Louis Kuo <louis.kuo@...iatek.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Andy Hsieh <andy.hsieh@...iatek.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
"moderated list:ARM/Mediatek USB3 PHY DRIVER"
<linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/Mediatek USB3 PHY DRIVER"
<linux-mediatek@...ts.infradead.org>,
"open list:GENERIC PHY FRAMEWORK" <linux-phy@...ts.infradead.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:DRM DRIVERS FOR MEDIATEK"
<dri-devel@...ts.freedesktop.org>
Subject: Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
Hi, Julien:
Julien Stephan <jstephan@...libre.com> 於 2023年4月3日 週一 下午3:20寫道：
>
> From: Phi-bang Nguyen <pnguyen@...libre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@...iatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@...libre.com>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@...libre.com>
> Signed-off-by: Julien Stephan <jstephan@...libre.com>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435 ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
>
[snip]
> +static int mtk_mipi_phy_power_on(struct phy *phy)
> +{
> + struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
> + struct mtk_mipi_dphy *priv = port->dev;
> + struct regmap *regmap_base = port->regmap_base;
> + struct regmap *regmap_4d1c = port->regmap_4d1c;
> + int ret = 0;
> +
> + mutex_lock(&priv->lock);
> +
> + switch (port->id) {
> + case MTK_MIPI_PHY_PORT_0:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0A].active ||
> + priv->ports[MTK_MIPI_PHY_PORT_0B].active)
> + ret = -EBUSY;
> + break;
> +
> + case MTK_MIPI_PHY_PORT_0A:
> + case MTK_MIPI_PHY_PORT_0B:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0].active)
> + ret = -EBUSY;
> + break;
> + }
> +
> + if (!ret)
> + port->active = true;
> +
> + mutex_unlock(&priv->lock);
> +
> + if (ret < 0)
> + return ret;
> +
> + /* Set analog phy mode to DPHY */
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 0);
> + }
> +
> + if (port->is_4d1c) {
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + }
> +
> + /* Byte clock invert */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> + }
> +
> + /* Start ANA EQ tuning */
> + if (port->is_cdphy) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> + }
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
RG_CSI1A_L0_EQ_IS is identical to RG_CSI0A_L0_T0AB_EQ_IS, and ditto
for below register. I think the function of each bitwise register is
the same. Define only one copy of the these register, don't duplicate
the same thing.
Regards,
Chun-Kuang.
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> + }
> + }
> +
> + /* End ANA EQ tuning */
> + regmap_write(regmap_base, MIPI_RX_ANA40_CSIxA, 0x90);
> +
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + REGMAP_BIT(regmap_base, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + /* ANA power on */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + usleep_range(20, 40);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> +
> + return 0;
> +}
> +
Powered by blists - more mailing lists