lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZCqzuwDLGuBDMHQG@shell.armlinux.org.uk>
Date:   Mon, 3 Apr 2023 12:08:43 +0100
From:   "Russell King (Oracle)" <linux@...linux.org.uk>
To:     Siddharth Vadapalli <s-vadapalli@...com>
Cc:     davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com, rogerq@...nel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        srk@...com
Subject: Re: [PATCH net-next v2 1/3] net: ethernet: ti: am65-cpsw: Move mode
 specific config to mac_config()

On Mon, Apr 03, 2023 at 04:31:04PM +0530, Siddharth Vadapalli wrote:
> Move the interface mode specific configuration to the mac_config()
> callback am65_cpsw_nuss_mac_config().
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
> ---
>  drivers/net/ethernet/ti/am65-cpsw-nuss.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> index d17757ecbf42..74e099828978 100644
> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> @@ -1504,12 +1504,17 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in
>  							  phylink_config);
>  	struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
>  	struct am65_cpsw_common *common = port->common;
> +	u32 mac_control = 0;
>  
>  	if (common->pdata.extra_modes & BIT(state->interface)) {
> -		if (state->interface == PHY_INTERFACE_MODE_SGMII)
> +		if (state->interface == PHY_INTERFACE_MODE_SGMII) {
> +			mac_control |= CPSW_SL_CTL_EXT_EN;
>  			writel(ADVERTISE_SGMII,
>  			       port->sgmii_base + AM65_CPSW_SGMII_MR_ADV_ABILITY_REG);
> +		}
>  
> +		if (mac_control)
> +			cpsw_sl_ctl_set(port->slave.mac_sl, mac_control);
>  		writel(AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE,
>  		       port->sgmii_base + AM65_CPSW_SGMII_CONTROL_REG);
>  	}
> @@ -1553,8 +1558,7 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
>  
>  	if (speed == SPEED_1000)
>  		mac_control |= CPSW_SL_CTL_GIG;
> -	if (interface == PHY_INTERFACE_MODE_SGMII)
> -		mac_control |= CPSW_SL_CTL_EXT_EN;
> +	/* TODO: Verify whether in-band is necessary for 10 Mbps RGMII */
>  	if (speed == SPEED_10 && phy_interface_mode_is_rgmii(interface))
>  		/* Can be used with in band mode only */
>  		mac_control |= CPSW_SL_CTL_EXT_EN;

I'm afraid I can see you haven't thought this patch through properly.

am65_cpsw_nuss_mac_link_down() will call
cpsw_sl_ctl_reset(port->slave.mac_sl); which has the effect of clearing
to zero the entire MAC control register. This will clear
CPSW_SL_CTL_EXT_EN that was set in am65_cpsw_nuss_mac_config() which is
not what you want to be doing.

Given that we have the 10Mbps issue with RGMII, I think what you want
to be doing is:

1. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_config() if in SGMII
   mode, otherwise clear this bit.

2. Clear the mac_control register in am65_cpsw_nuss_mac_link_down()
   if in RMGII mode, otherwise preserve the state of
   CPSW_SL_CTL_EXT_EN but clear all other bits.

3. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_link_up() if in
   RGMII mode and 10Mbps.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ