| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fcfaccb2-bf93-091d-d3d7-81fed6fb62fe@linaro.org>
Date: Wed, 5 Apr 2023 17:45:59 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Patrick Lai <quic_plai@...cinc.com>
Subject: Re: [PATCH v3] arm64: dts: qcom: sm8550: add Soundwire controllers
On 5.04.2023 08:11, Krzysztof Kozlowski wrote:
> Add nodes for LPASS Soundwire v2.0.0 controllers. Use labels with
> indices matching downstream DTS, to make any comparisons easier.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
>
> Changes since v2:
> 1. Use labels instead of comments (Konrad).
> 2. Use interrupts instead of interupts-extended (Konrad)
>
> Changes since v1:
> 1. Correct IO range length.
>
> The bindings and driver are here:
> https://lore.kernel.org/linux-arm-msm/20230403132503.62090-1-krzysztof.kozlowski@linaro.org/T/#t
>
> Cc: Patrick Lai <quic_plai@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 109 +++++++++++++++++++++++++++
> 1 file changed, 109 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index dc6150e97d46..f9eaede39b5b 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2004,6 +2004,33 @@ lpass_wsa2macro: codec@...0000 {
> #sound-dai-cells = <1>;
> };
>
> + swr3: soundwire-controller@...0000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06ab0000 0 0x10000>;
> + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lpass_wsa2macro>;
> + clock-names = "iface";
> + label = "WSA2";
> +
> + qcom,din-ports = <4>;
> + qcom,dout-ports = <9>;
> +
> + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
> + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> lpass_rxmacro: codec@...0000 {
> compatible = "qcom,sm8550-lpass-rx-macro";
> reg = <0 0x06ac0000 0 0x1000>;
> @@ -2023,6 +2050,33 @@ lpass_rxmacro: codec@...0000 {
> #sound-dai-cells = <1>;
> };
>
> + swr1: soundwire-controller@...0000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06ad0000 0 0x10000>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lpass_rxmacro>;
> + clock-names = "iface";
> + label = "RX";
> +
> + qcom,din-ports = <0>;
> + qcom,dout-ports = <10>;
> +
> + qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> lpass_txmacro: codec@...0000 {
> compatible = "qcom,sm8550-lpass-tx-macro";
> reg = <0 0x06ae0000 0 0x1000>;
> @@ -2061,6 +2115,61 @@ lpass_wsamacro: codec@...0000 {
> #sound-dai-cells = <1>;
> };
>
> + swr0: soundwire-controller@...0000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06b10000 0 0x10000>;
> + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lpass_wsamacro>;
> + clock-names = "iface";
> + label = "WSA";
> +
> + qcom,din-ports = <4>;
> + qcom,dout-ports = <9>;
> +
> + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
> + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> + swr2: soundwire-controller@...0000 {
> + compatible = "qcom,soundwire-v2.0.0";
> + reg = <0 0x06d30000 0 0x10000>;
> + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "core", "wakeup";
> + clocks = <&lpass_vamacro>;
> + clock-names = "iface";
> + label = "TX";
> +
> + qcom,din-ports = <4>;
> + qcom,dout-ports = <0>;
> + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + #sound-dai-cells = <1>;
> + status = "disabled";
> + };
> +
> lpass_vamacro: codec@...4000 {
> compatible = "qcom,sm8550-lpass-va-macro";
> reg = <0 0x06d44000 0 0x1000>;
Powered by blists - more mailing lists