| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230406182000.956275-2-cristian.ciocaltea@collabora.com>
Date: Thu, 6 Apr 2023 21:20:00 +0300
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiko Stuebner <heiko@...ech.de>
Cc: linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, kernel@...labora.com
Subject: [PATCH v3 1/1] dt-bindings: hwmon: pwm-fan: Convert to DT schema
Convert the PWM fan bindings to DT schema format.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
---
.../devicetree/bindings/hwmon/pwm-fan.txt | 68 +------------
.../devicetree/bindings/hwmon/pwm-fan.yaml | 97 +++++++++++++++++++
2 files changed, 98 insertions(+), 67 deletions(-)
create mode 100644 Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 4509e688623a..48886f0ce415 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -1,67 +1 @@
-Bindings for a fan connected to the PWM lines
-
-Required properties:
-- compatible : "pwm-fan"
-- pwms : the PWM that is used to control the PWM fan
-- cooling-levels : PWM duty cycle values in a range from 0 to 255
- which correspond to thermal cooling states
-
-Optional properties:
-- fan-supply : phandle to the regulator that provides power to the fan
-- interrupts : This contains an interrupt specifier for each fan
- tachometer output connected to an interrupt source.
- The output signal must generate a defined number of
- interrupts per fan revolution, which require that
- it must be self resetting edge interrupts. See
- interrupt-controller/interrupts.txt for the format.
-- pulses-per-revolution : define the number of pulses per fan revolution for
- each tachometer input as an integer (default is 2
- interrupts per revolution). The value must be
- greater than zero.
-
-Example:
- fan0: pwm-fan {
- compatible = "pwm-fan";
- #cooling-cells = <2>;
- pwms = <&pwm 0 10000 0>;
- cooling-levels = <0 102 170 230>;
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- thermal-sensors = <&tmu 0>;
- polling-delay-passive = <0>;
- polling-delay = <0>;
- trips {
- cpu_alert1: cpu-alert1 {
- temperature = <100000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- };
- cooling-maps {
- map0 {
- trip = <&cpu_alert1>;
- cooling-device = <&fan0 0 1>;
- };
- };
- };
-
-Example 2:
- fan0: pwm-fan {
- compatible = "pwm-fan";
- pwms = <&pwm 0 40000 0>;
- fan-supply = <®_fan>;
- interrupt-parent = <&gpio5>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- pulses-per-revolution = <2>;
- };
-
-Example 3:
- fan0: pwm-fan {
- compatible = "pwm-fan";
- pwms = <&pwm1 0 25000 0>;
- interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>,
- <&gpio2 5 IRQ_TYPE_EDGE_FALLING>;
- pulses-per-revolution = <2>, <1>;
- };
+This file has moved to pwm-fan.yaml.
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
new file mode 100644
index 000000000000..4e5abf7580cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to PWM lines
+
+maintainers:
+ - Jean Delvare <jdelvare@...e.com>
+ - Guenter Roeck <linux@...ck-us.net>
+
+properties:
+ compatible:
+ const: pwm-fan
+
+ cooling-levels:
+ description: PWM duty cycle values corresponding to thermal cooling states.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ maximum: 255
+
+ fan-supply:
+ description: Phandle to the regulator that provides power to the fan.
+
+ interrupts:
+ description:
+ This contains an interrupt specifier for each fan tachometer output
+ connected to an interrupt source. The output signal must generate a
+ defined number of interrupts per fan revolution, which require that
+ it must be self resetting edge interrupts.
+ maxItems: 1
+
+ pulses-per-revolution:
+ description:
+ Define the number of pulses per fan revolution for each tachometer
+ input as an integer.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 4
+ default: 2
+
+ pwms:
+ description: The PWM that is used to control the fan.
+ maxItems: 1
+
+ "#cooling-cells": true
+
+required:
+ - compatible
+ - pwms
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 102 170 230>;
+ pwms = <&pwm 0 10000 0>;
+ #cooling-cells = <2>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ thermal-sensors = <&tmu 0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ trips {
+ cpu_alert1: cpu-alert1 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 0 1>;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 40000 0>;
+ fan-supply = <®_fan>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ pulses-per-revolution = <2>;
+ };
--
2.40.0
Powered by blists - more mailing lists