linux-kernel - Re: [PATCH v2 1/2] dt-bindings: net: Convert ATH10K to YAML

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <168078494959.2736424.13312532374051031538.robh@kernel.org>
Date:   Thu, 06 Apr 2023 07:47:48 -0500
From:   Rob Herring <robh@...nel.org>
To:     Konrad Dybcio <konrad.dybcio@...aro.org>
Cc:     Eric Dumazet <edumazet@...gle.com>, linux-wireless@...r.kernel.org,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        devicetree@...r.kernel.org,
        "David S. Miller" <davem@...emloft.net>,
        linux-kernel@...r.kernel.org, Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>, netdev@...r.kernel.org,
        Bjorn Andersson <andersson@...nel.org>,
        Kalle Valo <kvalo@...nel.org>, Andy Gross <agross@...nel.org>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        linux-arm-msm@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>,
        ath10k@...ts.infradead.org
Subject: Re: [PATCH v2 1/2] dt-bindings: net: Convert ATH10K to YAML


On Thu, 06 Apr 2023 13:54:04 +0200, Konrad Dybcio wrote:
> Convert the ATH10K bindings to YAML.
> 
> Dropped properties that are absent at the current state of mainline:
> - qcom,msi_addr
> - qcom,msi_base
> 
> qcom,coexist-support and qcom,coexist-gpio-pin do very little and should
> be reconsidered on the driver side, especially the latter one.
> 
> Somewhat based on the ath11k bindings.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
>  .../bindings/net/wireless/qcom,ath10k.txt          | 215 ------------
>  .../bindings/net/wireless/qcom,ath10k.yaml         | 359 +++++++++++++++++++++
>  2 files changed, 359 insertions(+), 215 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.example.dtb: wifi@...00000: wifi-firmware: 'wifi-firmware' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.example.dtb: wifi@...00000: wifi-firmware: 'iommus' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml

doc reference errors (make refcheckdocs):
MAINTAINERS: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230406-topic-ath10k_bindings-v2-1-557f884a65d1@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.