[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230406130455.1155362-1-ivecera@redhat.com>
Date: Thu, 6 Apr 2023 15:04:55 +0200
From: Ivan Vecera <ivecera@...hat.com>
To: netdev@...r.kernel.org
Cc: mschmidt@...hat.com, Michael Chan <michael.chan@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net-next] bnxt_en: Allow to set switchdev mode without existing VFs
Remove an inability of bnxt_en driver to set eswitch to switchdev
mode without existing VFs by:
1. Allow to set switchdev mode in bnxt_dl_eswitch_mode_set() so
representors are created only when num_vfs > 0 otherwise just
set bp->eswitch_mode
2. Do not automatically change bp->eswitch_mode during
bnxt_vf_reps_create() and bnxt_vf_reps_destroy() calls so
the eswitch mode is managed only by an user by devlink.
Just set temporarily bp->eswitch_mode to legacy to avoid
re-opening of representors during destroy.
3. Create representors in bnxt_sriov_enable() if current eswitch
mode is switchdev one
Tested by this sequence:
1. Set PF interface up
2. Set PF's eswitch mode to switchdev
3. Created N VFs
4. Checked that N representors were created
5. Set eswitch mode to legacy
6. Checked that representors were deleted
7. Set eswitch mode back to switchdev
8. Checked that representros were re-created
9. Deleted all VFs
10. Checked that all representors were deleted as well
11. Checked that current eswitch mode is still switchdev
Signed-off-by: Ivan Vecera <ivecera@...hat.com>
---
.../net/ethernet/broadcom/bnxt/bnxt_sriov.c | 16 ++++++++++
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c | 29 ++++++++++++-------
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.h | 6 ++++
3 files changed, 41 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
index 3ed3a2b3b3a9..dde327f2c57e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
@@ -825,8 +825,24 @@ static int bnxt_sriov_enable(struct bnxt *bp, int *num_vfs)
if (rc)
goto err_out2;
+ if (bp->eswitch_mode != DEVLINK_ESWITCH_MODE_SWITCHDEV)
+ return 0;
+
+ /* Create representors for VFs in switchdev mode */
+ devl_lock(bp->dl);
+ rc = bnxt_vf_reps_create(bp);
+ devl_unlock(bp->dl);
+ if (rc) {
+ netdev_info(bp->dev, "Cannot enable VFS as representors cannot be created\n");
+ goto err_out3;
+ }
+
return 0;
+err_out3:
+ /* Disable SR-IOV */
+ pci_disable_sriov(bp->pdev);
+
err_out2:
/* Free the resources reserved for various VF's */
bnxt_hwrm_func_vf_resource_free(bp, *num_vfs);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
index fcc65890820a..2f1a1f2d2157 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c
@@ -356,10 +356,15 @@ void bnxt_vf_reps_destroy(struct bnxt *bp)
/* un-publish cfa_code_map so that RX path can't see it anymore */
kfree(bp->cfa_code_map);
bp->cfa_code_map = NULL;
- bp->eswitch_mode = DEVLINK_ESWITCH_MODE_LEGACY;
- if (closed)
+ if (closed) {
+ /* Temporarily set legacy mode to avoid re-opening
+ * representors and restore switchdev mode after that.
+ */
+ bp->eswitch_mode = DEVLINK_ESWITCH_MODE_LEGACY;
bnxt_open_nic(bp, false, false);
+ bp->eswitch_mode = DEVLINK_ESWITCH_MODE_SWITCHDEV;
+ }
rtnl_unlock();
/* Need to call vf_reps_destroy() outside of rntl_lock
@@ -482,7 +487,7 @@ static void bnxt_vf_rep_netdev_init(struct bnxt *bp, struct bnxt_vf_rep *vf_rep,
dev->min_mtu = ETH_ZLEN;
}
-static int bnxt_vf_reps_create(struct bnxt *bp)
+int bnxt_vf_reps_create(struct bnxt *bp)
{
u16 *cfa_code_map = NULL, num_vfs = pci_num_vf(bp->pdev);
struct bnxt_vf_rep *vf_rep;
@@ -535,7 +540,6 @@ static int bnxt_vf_reps_create(struct bnxt *bp)
/* publish cfa_code_map only after all VF-reps have been initialized */
bp->cfa_code_map = cfa_code_map;
- bp->eswitch_mode = DEVLINK_ESWITCH_MODE_SWITCHDEV;
netif_keep_dst(bp->dev);
return 0;
@@ -559,6 +563,7 @@ int bnxt_dl_eswitch_mode_set(struct devlink *devlink, u16 mode,
struct netlink_ext_ack *extack)
{
struct bnxt *bp = bnxt_get_bp_from_dl(devlink);
+ int ret = 0;
if (bp->eswitch_mode == mode) {
netdev_info(bp->dev, "already in %s eswitch mode\n",
@@ -570,7 +575,7 @@ int bnxt_dl_eswitch_mode_set(struct devlink *devlink, u16 mode,
switch (mode) {
case DEVLINK_ESWITCH_MODE_LEGACY:
bnxt_vf_reps_destroy(bp);
- return 0;
+ break;
case DEVLINK_ESWITCH_MODE_SWITCHDEV:
if (bp->hwrm_spec_code < 0x10803) {
@@ -578,15 +583,19 @@ int bnxt_dl_eswitch_mode_set(struct devlink *devlink, u16 mode,
return -ENOTSUPP;
}
- if (pci_num_vf(bp->pdev) == 0) {
- netdev_info(bp->dev, "Enable VFs before setting switchdev mode\n");
- return -EPERM;
- }
- return bnxt_vf_reps_create(bp);
+ /* Create representors for existing VFs */
+ if (pci_num_vf(bp->pdev) > 0)
+ ret = bnxt_vf_reps_create(bp);
+ break;
default:
return -EINVAL;
}
+
+ if (!ret)
+ bp->eswitch_mode = mode;
+
+ return ret;
}
#endif
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.h
index 5637a84884d7..33a965631d0b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.h
@@ -14,6 +14,7 @@
#define MAX_CFA_CODE 65536
+int bnxt_vf_reps_create(struct bnxt *bp);
void bnxt_vf_reps_destroy(struct bnxt *bp);
void bnxt_vf_reps_close(struct bnxt *bp);
void bnxt_vf_reps_open(struct bnxt *bp);
@@ -37,6 +38,11 @@ int bnxt_dl_eswitch_mode_set(struct devlink *devlink, u16 mode,
#else
+static inline int bnxt_vf_reps_create(struct bnxt *bp)
+{
+ return 0;
+}
+
static inline void bnxt_vf_reps_close(struct bnxt *bp)
{
}
--
2.39.2
Powered by blists - more mailing lists