linux-kernel - Re: [PATCH V3 4/5] arm64: dts: qcom: ipq9574: Add SMPA1 regulator node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 7 Apr 2023 10:11:32 +0530
From:   Devi Priya <quic_devipriy@...cinc.com>
To:     Konrad Dybcio <konrad.dybcio@...aro.org>, <agross@...nel.org>,
        <andersson@...nel.org>, <lgirdwood@...il.com>,
        <broonie@...nel.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>
CC:     <quic_srichara@...cinc.com>, <quic_sjaganat@...cinc.com>,
        <quic_kathirav@...cinc.com>, <quic_arajkuma@...cinc.com>,
        <quic_anusha@...cinc.com>, <quic_ipkumar@...cinc.com>
Subject: Re: [PATCH V3 4/5] arm64: dts: qcom: ipq9574: Add SMPA1 regulator
 node



On 4/7/2023 1:17 AM, Konrad Dybcio wrote:
> 
> 
> On 6.04.2023 09:00, Devi Priya wrote:
>> Add support for SMPA1 regulator node in IPQ9574.
>>
>> Co-developed-by: Praveenkumar I <quic_ipkumar@...cinc.com>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@...cinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy@...cinc.com>
>> ---
>>   Changes in V3:
>> 	- Updated the regulator-min-microvolt with the SVS voltage 725000uV
>>
>>   arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++++++++++++++++
>>   1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>> index 3ae38cf327ea..06f579b1c590 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>> @@ -44,6 +44,25 @@
>>   	};
>>   };
>>   
>> +&rpm_requests {
>> +	regulators {
>> +		compatible = "qcom,rpm-mp5496-regulators";
>> +
>> +		ipq9574_s1: s1 {
>> +		/*
>> +		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
>> +		 * During regulator registration, kernel not knowing the initial voltage,
>> +		 * considers it as zero and brings up the regulators with minimum supported voltage.
> 
>> +		 * Updating the regulator-min-microvolt with SVS voltage of 725000uV so that
> s/Updating/Update
> s/725000uV/725mV here and below (for consistency with the first mention
> of 800mV)
> 
Sure, will update!
> Konrad
>> +		 * the regulators are brought up with 725000uV which is sufficient for all the
>> +		 * corner parts to operate at 800MHz
>> +		 */
>> +			regulator-min-microvolt = <725000>;
>> +			regulator-max-microvolt = <1075000>;
>> +		};
>> +	};
>> +};
>> +
>>   &pcie1_phy {
>>   	status = "okay";
>>   };