lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230408114624.824144-1-risca@dalakolonin.se>
Date:   Sat,  8 Apr 2023 13:46:17 +0200
From:   Patrik Dahlström <risca@...akolonin.se>
To:     linux-iio@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, letux-kernel@...nphoenux.org,
        kernel@...a-handheld.com, pgoudagunta@...dia.com,
        hns@...delico.com, jic23@...nel.org, lars@...afoo.de,
        linux-omap@...r.kernel.org,
        Patrik Dahlström <risca@...akolonin.se>
Subject: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events

This series is based on linux-next/master [1] and [2].

The palmas gpadc block has support for monitoring up to 2 ADC channels
and issue an interrupt if they reach past a set threshold. This can be
configured statically with device tree today, but it only gets enabled
when reaching sleep mode. Also, it doesn't look like anyone is using it.

Instead of this one special case, change the code so userspace can
configure the ADC channels to their own needs through the iio events
subsystem. The high and low threshold values can be set for every
channel, but only 2 thresholds can be enabled at a time. Trying to
enable more than 2 thresholds will result in an error.

The configured thresholds will wake up the system from sleep mode if
wakeup is enabled in /sys/devices/.../power/wakeup.

The old platform data was removed.

Thresholds, events, and wakeup were tested on omap5-uevm board. It wakes
up from sleep mode when wakeup is enabled and a threshold is passed. A
userspace tool for monitoring events and adjusting thresholds can be
found at [3].

V2 -> V3:
* Rebased to linux-next.
* Avoid reconfiguring events on error and when old == new value.
V1 -> V2:
* Begin by removing adc_wakeupX_data instead of doing it last.
* Split changes in smaller patches

[1] git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
[2] https://lore.kernel.org/linux-iio/20230318163039.56115-1-jic23@kernel.org/
[3] https://github.com/Risca/pyra_vol_mon

Patrik Dahlström (7):
  iio: adc: palmas: remove adc_wakeupX_data
  iio: adc: palmas: replace "wakeup" with "event"
  iio: adc: palmas: use iio_event_direction for threshold polarity
  iio: adc: palmas: move eventX_enable into palmas_adc_event
  iio: adc: palmas: always reset events on unload
  iio: adc: palmas: add support for iio threshold events
  iio: adc: palmas: don't alter event config on suspend/resume

 drivers/iio/adc/palmas_gpadc.c | 559 +++++++++++++++++++++++++++------
 include/linux/mfd/palmas.h     |   8 -
 2 files changed, 464 insertions(+), 103 deletions(-)


base-commit: 8417c8f5007bf4567ccffda850a3157c7d905f67
prerequisite-patch-id: b0418c707db13f514400956596e9ebe91c25bba0
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ