Message-Id: <20230410081438.1750-22-xin3.li@intel.com>
Date:   Mon, 10 Apr 2023 01:14:26 -0700
From:   Xin Li <xin3.li@...el.com>
To:     linux-kernel@...r.kernel.org, x86@...nel.org, kvm@...r.kernel.org
Cc:     tglx@...utronix.de, mingo@...hat.com, bp@...en8.de,
        dave.hansen@...ux.intel.com, hpa@...or.com, peterz@...radead.org,
        andrew.cooper3@...rix.com, seanjc@...gle.com, pbonzini@...hat.com,
        ravi.v.shankar@...el.com, jiangshanlai@...il.com,
        shan.kang@...el.com
Subject: [PATCH v8 21/33] x86/fred: FRED initialization code

From: "H. Peter Anvin (Intel)" <hpa@...or.com>

The code to initialize FRED when it's available and _not_ disabled.

cpu_init_fred_exceptions() is the core function to initialize FRED,
which
  1. Sets up FRED entrypoints for events happening in ring 0 and 3.
  2. Sets up a default stack for event handling.
  3. Sets up dedicated event stacks for DB/NMI/MC/DF, equivalent to
     the IDT IST stacks.
  4. Forces 32-bit system calls to use "int $0x80" only.
  5. Enables FRED and invalidtes IDT.

When the FRED is used, cpu_init_exception_handling() initializes FRED
through calling cpu_init_fred_exceptions(), otherwise it sets up TSS
IST and loads IDT.

As FRED uses the ring 3 FRED entrypoint for SYSCALL and SYSENTER,
it skips setting up SYSCALL/SYSENTER related MSRs, e.g., MSR_LSTAR.

Signed-off-by: H. Peter Anvin (Intel) <hpa@...or.com>
Co-developed-by: Xin Li <xin3.li@...el.com>
Tested-by: Shan Kang <shan.kang@...el.com>
Signed-off-by: Xin Li <xin3.li@...el.com>
---

Changes since v5:
* Add a comment for FRED stack level settings (Lai Jiangshan).
* Define #DB/NMI/#MC/#DF stack levels using macros.
---
 arch/x86/include/asm/fred.h  | 27 +++++++++++++
 arch/x86/include/asm/traps.h |  2 +
 arch/x86/kernel/Makefile     |  1 +
 arch/x86/kernel/cpu/common.c | 74 +++++++++++++++++++++-------------
 arch/x86/kernel/fred.c       | 78 ++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/irqinit.c    |  7 +++-
 arch/x86/kernel/traps.c      | 16 +++++++-
 7 files changed, 175 insertions(+), 30 deletions(-)
 create mode 100644 arch/x86/kernel/fred.c

diff --git a/arch/x86/include/asm/fred.h b/arch/x86/include/asm/fred.h
index 61048aa4e01d..c5fbc4f18059 100644
--- a/arch/x86/include/asm/fred.h
+++ b/arch/x86/include/asm/fred.h
@@ -57,6 +57,19 @@
 #define FRED_CSX_ALLOW_SINGLE_STEP	_BITUL(25)
 #define FRED_CSX_INTERRUPT_SHADOW	_BITUL(24)
 
+/* #DB in the kernel would imply the use of a kernel debugger. */
+#define FRED_DB_STACK_LEVEL		1
+#define FRED_NMI_STACK_LEVEL		2
+#define FRED_MC_STACK_LEVEL		2
+/*
+ * #DF is the highest level because a #DF means "something went wrong
+ * *while delivering an exception*." The number of cases for which that
+ * can happen with FRED is drastically reduced and basically amounts to
+ * "the stack you pointed me to is broken." Thus, always change stacks
+ * on #DF, which means it should be at the highest level.
+ */
+#define FRED_DF_STACK_LEVEL		3
+
 #ifndef __ASSEMBLY__
 
 #include <linux/kernel.h>
@@ -104,8 +117,22 @@ DECLARE_FRED_HANDLER(fred_exc_debug);
 DECLARE_FRED_HANDLER(fred_exc_page_fault);
 DECLARE_FRED_HANDLER(fred_exc_machine_check);
 
+/*
+ * The actual assembly entry and exit points
+ */
+extern __visible void fred_entrypoint_user(void);
+
+/*
+ * Initialization
+ */
+void cpu_init_fred_exceptions(void);
+void fred_setup_apic(void);
+
 #endif /* __ASSEMBLY__ */
 
+#else
+#define cpu_init_fred_exceptions() BUG()
+#define fred_setup_apic() BUG()
 #endif /* CONFIG_X86_FRED */
 
 #endif /* ASM_X86_FRED_H */
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 46f5e4e2a346..612b3d6fec53 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -56,4 +56,6 @@ void __noreturn handle_stack_overflow(struct pt_regs *regs,
 	void f (struct pt_regs *regs)
 typedef DECLARE_SYSTEM_INTERRUPT_HANDLER((*system_interrupt_handler));
 
+system_interrupt_handler get_system_interrupt_handler(unsigned int i);
+
 #endif /* _ASM_X86_TRAPS_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index dd61752f4c96..08d9c0a0bfbe 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -47,6 +47,7 @@ obj-y			+= platform-quirks.o
 obj-y			+= process_$(BITS).o signal.o signal_$(BITS).o
 obj-y			+= traps.o idt.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time.o ioport.o dumpstack.o nmi.o
+obj-$(CONFIG_X86_FRED)	+= fred.o
 obj-$(CONFIG_MODIFY_LDT_SYSCALL)	+= ldt.o
 obj-y			+= setup.o x86_init.o i8259.o irqinit.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index e8cf6f4cfb52..eea41cb8722e 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -58,6 +58,7 @@
 #include <asm/microcode_intel.h>
 #include <asm/intel-family.h>
 #include <asm/cpu_device_id.h>
+#include <asm/fred.h>
 #include <asm/uv/uv.h>
 #include <asm/sigframe.h>
 #include <asm/traps.h>
@@ -2054,28 +2055,6 @@ static void wrmsrl_cstar(unsigned long val)
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
-	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
-	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
-
-#ifdef CONFIG_IA32_EMULATION
-	wrmsrl_cstar((unsigned long)entry_SYSCALL_compat);
-	/*
-	 * This only works on Intel CPUs.
-	 * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
-	 * This does not cause SYSENTER to jump to the wrong location, because
-	 * AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
-	 */
-	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
-	wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
-		    (unsigned long)(cpu_entry_stack(smp_processor_id()) + 1));
-	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
-#else
-	wrmsrl_cstar((unsigned long)ignore_sysret);
-	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
-	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
-	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
-#endif
-
 	/*
 	 * Flags to clear on syscall; clear as much as possible
 	 * to minimize user space-kernel interference.
@@ -2086,6 +2065,41 @@ void syscall_init(void)
 	       X86_EFLAGS_IF|X86_EFLAGS_DF|X86_EFLAGS_OF|
 	       X86_EFLAGS_IOPL|X86_EFLAGS_NT|X86_EFLAGS_RF|
 	       X86_EFLAGS_AC|X86_EFLAGS_ID);
+
+	/*
+	 * The default user and kernel segments
+	 */
+	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
+
+	if (cpu_feature_enabled(X86_FEATURE_FRED)) {
+		/* Both sysexit and sysret cause #UD when FRED is enabled */
+		wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
+		wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+		wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
+	} else {
+		wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
+
+#ifdef CONFIG_IA32_EMULATION
+		wrmsrl_cstar((unsigned long)entry_SYSCALL_compat);
+		/*
+		 * This only works on Intel CPUs.
+		 * On AMD CPUs these MSRs are 32-bit, CPU truncates
+		 * MSR_IA32_SYSENTER_EIP.
+		 * This does not cause SYSENTER to jump to the wrong
+		 * location, because AMD doesn't allow SYSENTER in
+		 * long mode (either 32- or 64-bit).
+		 */
+		wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
+		wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
+			    (unsigned long)(cpu_entry_stack(smp_processor_id()) + 1));
+		wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
+#else
+		wrmsrl_cstar((unsigned long)ignore_sysret);
+		wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
+		wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+		wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
+#endif
+	}
 }
 
 #else	/* CONFIG_X86_64 */
@@ -2218,18 +2232,24 @@ void cpu_init_exception_handling(void)
 	/* paranoid_entry() gets the CPU number from the GDT */
 	setup_getcpu(cpu);
 
-	/* IST vectors need TSS to be set up. */
-	tss_setup_ist(tss);
+	/* Set up the TSS */
 	tss_setup_io_bitmap(tss);
 	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
-
 	load_TR_desc();
 
 	/* GHCB needs to be setup to handle #VC. */
 	setup_ghcb();
 
-	/* Finally load the IDT */
-	load_current_idt();
+	if (cpu_feature_enabled(X86_FEATURE_FRED)) {
+		/* Set up FRED exception handling */
+		cpu_init_fred_exceptions();
+	} else {
+		/* IST vectors need TSS to be set up. */
+		tss_setup_ist(tss);
+
+		/* Finally load the IDT */
+		load_current_idt();
+	}
 }
 
 /*
diff --git a/arch/x86/kernel/fred.c b/arch/x86/kernel/fred.c
new file mode 100644
index 000000000000..907abfd69f3f
--- /dev/null
+++ b/arch/x86/kernel/fred.c
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/kernel.h>
+#include <asm/desc.h>
+#include <asm/fred.h>
+#include <asm/tlbflush.h>	/* For cr4_set_bits() */
+#include <asm/traps.h>
+
+/*
+ * Initialize FRED on this CPU. This cannot be __init as it is called
+ * during CPU hotplug.
+ */
+void cpu_init_fred_exceptions(void)
+{
+	wrmsrl(MSR_IA32_FRED_CONFIG,
+	       FRED_CONFIG_REDZONE | /* Reserve for CALL emulation */
+	       FRED_CONFIG_INT_STKLVL(0) |
+	       FRED_CONFIG_ENTRYPOINT(fred_entrypoint_user));
+
+	/*
+	 * The purpose of separate stacks for NMI, #DB and #MC *in the kernel*
+	 * (remember that user space faults are always taken on stack level 0)
+	 * is to avoid overflowing the kernel stack.
+	 */
+	wrmsrl(MSR_IA32_FRED_STKLVLS,
+	       FRED_STKLVL(X86_TRAP_DB,  FRED_DB_STACK_LEVEL) |
+	       FRED_STKLVL(X86_TRAP_NMI, FRED_NMI_STACK_LEVEL) |
+	       FRED_STKLVL(X86_TRAP_MC,  FRED_MC_STACK_LEVEL) |
+	       FRED_STKLVL(X86_TRAP_DF,  FRED_DF_STACK_LEVEL));
+
+	/* The FRED equivalents to IST stacks... */
+	wrmsrl(MSR_IA32_FRED_RSP1, __this_cpu_ist_top_va(DB));
+	wrmsrl(MSR_IA32_FRED_RSP2, __this_cpu_ist_top_va(NMI));
+	wrmsrl(MSR_IA32_FRED_RSP3, __this_cpu_ist_top_va(DF));
+
+	/* Not used with FRED */
+	wrmsrl(MSR_LSTAR, 0ULL);
+	wrmsrl(MSR_CSTAR, 0ULL);
+	wrmsrl_safe(MSR_IA32_SYSENTER_CS,  (u64)GDT_ENTRY_INVALID_SEG);
+	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
+
+	/* Enable FRED */
+	cr4_set_bits(X86_CR4_FRED);
+	idt_invalidate();	/* Any further IDT use is a bug */
+
+	/* Use int $0x80 for 32-bit system calls in FRED mode */
+	setup_clear_cpu_cap(X86_FEATURE_SYSENTER32);
+	setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
+}
+
+/*
+ * Initialize system vectors from a FRED perspective, so
+ * lapic_assign_system_vectors() can do its job.
+ */
+void __init fred_setup_apic(void)
+{
+	int i;
+
+	for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
+		set_bit(i, system_vectors);
+
+	/*
+	 * Don't set the non assigned system vectors in the
+	 * system_vectors bitmap. Otherwise they show up in
+	 * /proc/interrupts.
+	 */
+#ifdef CONFIG_SMP
+	set_bit(IRQ_MOVE_CLEANUP_VECTOR, system_vectors);
+#endif
+
+	for (i = 0; i < NR_SYSTEM_VECTORS; i++) {
+		if (get_system_interrupt_handler(i) != NULL) {
+			set_bit(i + FIRST_SYSTEM_VECTOR, system_vectors);
+		}
+	}
+
+	/* The rest are fair game... */
+}
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index c683666876f1..2a510f72dd11 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -28,6 +28,7 @@
 #include <asm/setup.h>
 #include <asm/i8259.h>
 #include <asm/traps.h>
+#include <asm/fred.h>
 #include <asm/prom.h>
 
 /*
@@ -96,7 +97,11 @@ void __init native_init_IRQ(void)
 	/* Execute any quirks before the call gates are initialised: */
 	x86_init.irqs.pre_vector_init();
 
-	idt_setup_apic_and_irq_gates();
+	if (cpu_feature_enabled(X86_FEATURE_FRED))
+		fred_setup_apic();
+	else
+		idt_setup_apic_and_irq_gates();
+
 	lapic_assign_system_vectors();
 
 	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs()) {
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 549f7f962f8f..ecfaf4d647bb 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -1537,6 +1537,14 @@ static system_interrupt_handler system_interrupt_handlers[NR_SYSTEM_VECTORS] = {
 
 #undef SYSV
 
+system_interrupt_handler get_system_interrupt_handler(unsigned int i)
+{
+	if (i >= NR_SYSTEM_VECTORS)
+		return NULL;
+
+	return system_interrupt_handlers[i];
+}
+
 /*
  * External interrupt dispatch function.
  *
@@ -1572,7 +1580,8 @@ void __init install_system_interrupt_handler(unsigned int n, const void *asm_add
 #ifdef CONFIG_X86_64
 	system_interrupt_handlers[n - FIRST_SYSTEM_VECTOR] = (system_interrupt_handler)addr;
 #endif
-	alloc_intr_gate(n, asm_addr);
+	if (!cpu_feature_enabled(X86_FEATURE_FRED))
+		alloc_intr_gate(n, asm_addr);
 }
 
 void __init trap_init(void)
@@ -1585,7 +1594,10 @@ void __init trap_init(void)
 
 	/* Initialize TSS before setting up traps so ISTs work */
 	cpu_init_exception_handling();
+
 	/* Setup traps as cpu_init() might #GP */
-	idt_setup_traps();
+	if (!cpu_feature_enabled(X86_FEATURE_FRED))
+		idt_setup_traps();
+
 	cpu_init();
 }
-- 
2.34.1

Powered by blists - more mailing lists