| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <240fe5c1-9df7-80eb-ce99-b0e1d381c57e@linaro.org>
Date: Tue, 11 Apr 2023 20:07:17 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bhupesh Sharma <bhupesh.sharma@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
agross@...nel.org, andersson@...nel.org,
linux-kernel@...r.kernel.org, bhupesh.linux@...il.com,
robh+dt@...nel.org, krzysztof.kozlowski@...aro.org
Subject: Re: [PATCH v3 2/3] arm64: dts: qcom: Add base qrb4210-rb2 board dts
On 11.04.2023 19:38, Bhupesh Sharma wrote:
> On Tue, 11 Apr 2023 at 18:26, Konrad Dybcio <konrad.dybcio@...aro.org> wrote:
>> On 11.04.2023 09:28, Bhupesh Sharma wrote:
>>> Add DTS for Qualcomm qrb4210-rb2 board which uses SM4250 SoC.
>>>
>>> This adds debug uart, emmc, uSD and tlmm support along with
>>> regulators found on this board.
>>>
>>> Also defines the 'xo_board' and 'sleep_clk' frequencies for
>>> this board.
>>>
>>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
>>> ---
>>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>>> arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 +++++++++++++++++++++++
>>> 2 files changed, 224 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index e0e2def48470..d42c59572ace 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
>>> new file mode 100644
>>> index 000000000000..c9c6e3787462
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
>>> @@ -0,0 +1,223 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2023, Linaro Limited
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "sm4250.dtsi"
>>> +
>>> +/ {
>>> + model = "Qualcomm Technologies, Inc. QRB4210 RB2";
>>> + compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
>>> +
>>> + aliases {
>>> + serial0 = &uart4;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +
>>> + vph_pwr: vph-pwr-regulator {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "vph_pwr";
>>> + regulator-min-microvolt = <3700000>;
>>> + regulator-max-microvolt = <3700000>;
>>> +
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +};
>>> +
>>> +&qupv3_id_0 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&rpm_requests {
>>> + regulators {
>>> + compatible = "qcom,rpm-pm6125-regulators";
>>> +
>>> + vdd-s1-supply = <&vph_pwr>;
>>> + vdd-s2-supply = <&vph_pwr>;
>>> + vdd-s3-supply = <&vph_pwr>;
>>> + vdd-s4-supply = <&vph_pwr>;
>>> + vdd-s5-supply = <&vph_pwr>;
>>> + vdd-s6-supply = <&vph_pwr>;
>>> + vdd-s7-supply = <&vph_pwr>;
>>> + vdd-s8-supply = <&vph_pwr>;
>>> + vdd-s9-supply = <&vph_pwr>;
>>> + vdd-s10-supply = <&vph_pwr>;
>>> +
>>> + vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
>>> + vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
>>> + vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
>>> + vdd-l6-l8-supply = <&vreg_s5a_0p848>;
>>> + vdd-l9-l11-supply = <&vreg_s7a_2p04>;
>>> + vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
>>> + vdd-l12-l16-supply = <&vreg_s7a_2p04>;
>>> + vdd-l23-l24-supply = <&vph_pwr>;
>>> +
>>> + vreg_s5a_0p848: s5 {
>> I think going with pmicname_regulatorname (e.g. pm6125_s5) here
>> and adding:
>>
>> regulator-name = "vreg_s5a_0p848"
>>
>> would make this more maintainable.
>
> Ok.
>
>>> +&sdhc_1 {
>>> + vmmc-supply = <&vreg_l24a_2p96>;
>>> + vqmmc-supply = <&vreg_l11a_1p8>;
>>> + no-sdio;
>>> + non-removable;
>>> +
>>> + status = "okay";
>>> +};
>>> +
>>> +&sdhc_2 {
>>> + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
>> This comment is still pretty much spam.
>
> Ok.
>
>>> + vmmc-supply = <&vreg_l22a_2p96>;
>>> + vqmmc-supply = <&vreg_l5a_2p96>;
>>> + no-sdio;
>>> +
>>> + status = "okay";
>>> +};
>>> +
>>> +&sleep_clk {
>>> + clock-frequency = <32000>;
>>> +};
>>> +
>>> +&tlmm {
>>> + gpio-reserved-ranges = <37 5>, <43 2>, <47 1>,
>>> + <49 1>, <52 1>, <54 1>,
>>> + <56 3>, <61 2>, <64 1>,
>>> + <68 1>, <72 8>, <96 1>;
>>> +};
>>> +
>>> +&uart4 {
>>> + status = "okay";
>>> +};
>> This is not the correct SE for the production board. People
>> booting this will get a tz bite.
>
> Hmm.. I can swap it, but the problem is that it's as the SE for my RB2
> board, so I would rather provide instructions in the cover letter as to how
> to swap it (say for a production board) and recompile the dts.
That's what I did for RB1 and what I believe is the correct approach.
>
> Otherwise, it might break the debug uart console for even the test
> folks @ Qualcomm.
Perhaps that'll teach them a lesson about making major design
changes and sharing the details on release day..
We can take care of preproduction boards after we set up U-Boot
with hw rev recognition, but that's a story for another day.
> I will send a v4 accordinglyBjorn sent a "thank you" email already but I don't see the patches
on his branch, not sure how he wants to proceed here.
Konrad
>
> Thanks,
> Bhupesh
Powered by blists - more mailing lists