linux-kernel - RE: [PATCH] virtio_pci: Wait for legacy device to be reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <TY2PR06MB34243A9E1E9D4E34692A23BC859A9@TY2PR06MB3424.apcprd06.prod.outlook.com>
Date:   Tue, 11 Apr 2023 06:45:40 +0000
From:   Angus Chen <angus.chen@...uarmicro.com>
To:     Jason Wang <jasowang@...hat.com>
CC:     "mst@...hat.com" <mst@...hat.com>,
        "virtualization@...ts.linux-foundation.org" 
        <virtualization@...ts.linux-foundation.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] virtio_pci: Wait for legacy device to be reset



> -----Original Message-----
> From: Jason Wang <jasowang@...hat.com>
> Sent: Tuesday, April 11, 2023 2:40 PM
> To: Angus Chen <angus.chen@...uarmicro.com>
> Cc: mst@...hat.com; virtualization@...ts.linux-foundation.org;
> linux-kernel@...r.kernel.org
> Subject: Re: [PATCH] virtio_pci: Wait for legacy device to be reset
> 
> On Tue, Apr 11, 2023 at 2:36 PM Angus Chen <angus.chen@...uarmicro.com>
> wrote:
> >
> > Hi.
> >
> > > -----Original Message-----
> > > From: Jason Wang <jasowang@...hat.com>
> > > Sent: Tuesday, April 11, 2023 1:24 PM
> > > To: Angus Chen <angus.chen@...uarmicro.com>
> > > Cc: mst@...hat.com; virtualization@...ts.linux-foundation.org;
> > > linux-kernel@...r.kernel.org
> > > Subject: Re: [PATCH] virtio_pci: Wait for legacy device to be reset
> > >
> > > On Tue, Apr 11, 2023 at 9:39 AM Angus Chen
> <angus.chen@...uarmicro.com>
> > > wrote:
> > > >
> > > > We read the status of device after reset,
> > > > It is not guaranteed that the device be reseted successfully.
> > > > We can use a while loop to make sure that,like the modern device did.
> > > > The spec is not request it ,but it work.
> > >
> > > The only concern is if it's too late to do this.
> > >
> > > Btw, any reason you want to have a legacy hardware implementation. It
> > > will be very tricky to work correctly.
> >   En,I found this in the real production environment some times about one
> year ago.
> > and I fix this out of tree.our virtio card had been sold about thousands .
> >
> >   Now,we created a new card, it support virtio 0.95,1.0,1.1 etc.
> >   And we use this host vdpa+ legacy virtio in vm to hot migration,we found
> that the
> >   Legacy model often get the middle state value after reset and probe again.
> >   The Soc is Simulated by fpga which is run slower than the host,so the same
> bug
> >   Is found more frequently when the host use the other kernel like ubuntu or
> centos8.
> >
> >   So we hope we can fix this by upstream .
> 
> I think you can do mediation in your hypervisor.
> 
> When trapping set_status(), the hypervisor will not return until it
> reads 0 from the hardware?
Yes ，you are right，we tried it also.but it may block read status for a long time.
And occur softlock.

> 
> Thanks
> 
> > >
> > > Thanks
> > >
> > > >
> > > > Signed-off-by: Angus Chen <angus.chen@...uarmicro.com>
> > > > ---
> > > >  drivers/virtio/virtio_pci_legacy.c | 4 +++-
> > > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/virtio/virtio_pci_legacy.c
> b/drivers/virtio/virtio_pci_legacy.c
> > > > index 2257f1b3d8ae..f2d241563e4f 100644
> > > > --- a/drivers/virtio/virtio_pci_legacy.c
> > > > +++ b/drivers/virtio/virtio_pci_legacy.c
> > > > @@ -14,6 +14,7 @@
> > > >   *  Michael S. Tsirkin <mst@...hat.com>
> > > >   */
> > > >
> > > > +#include <linux/delay.h>
> > > >  #include "linux/virtio_pci_legacy.h"
> > > >  #include "virtio_pci_common.h"
> > > >
> > > > @@ -97,7 +98,8 @@ static void vp_reset(struct virtio_device *vdev)
> > > >         vp_legacy_set_status(&vp_dev->ldev, 0);
> > > >         /* Flush out the status write, and flush in device writes,
> > > >          * including MSi-X interrupts, if any. */
> > > > -       vp_legacy_get_status(&vp_dev->ldev);
> > > > +       while (vp_legacy_get_status(&vp_dev->ldev))
> > > > +               msleep(1);
> > > >         /* Flush pending VQ/configuration callbacks. */
> > > >         vp_synchronize_vectors(vdev);
> > > >  }
> > > > --
> > > > 2.25.1
> > > >
> >