[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230412151831.3069211-4-fabrice.gasnier@foss.st.com>
Date: Wed, 12 Apr 2023 17:18:30 +0200
From: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To: <hminas@...opsys.com>, <gregkh@...uxfoundation.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<alexandre.torgue@...s.st.com>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<amelie.delaunay@...s.st.com>, <fabrice.gasnier@...s.st.com>
Subject: [PATCH 3/4] usb: dwc2: platform: add support for utmi optional clock
Add support for the utmi clock. It's needed on STM32MP15, when using
the integrated full-speed PHY. This clock is an output of USBPHYC, but
HS USBPHYC is not attached as PHY in this case: Full-Speed PHY is directly
managed in dwc2 glue, through GGPIO register. Typical DT when using FS PHY
&usbotg_hs {
compatible = "st,stm32mp15-fsotg", "snps,dwc2";
pinctrl-names = "default";
pinctrl-0 = <&usbotg_hs_pins_a &usbotg_fs_dp_dm_pins_a>;
vbus-supply = <&vbus_otg>;
status = "okay";
};
In this configuration, USBPHYC clock output must be defined, so it can
be properly enabled as a clock provider:
clocks = <&rcc USBO_K>, <&usbphyc>;
clock-names = "otg", "utmi_clk";
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
---
drivers/usb/dwc2/core.h | 2 ++
drivers/usb/dwc2/platform.c | 20 +++++++++++++++++++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 40cf2880d7e5..0bb4c0c845bf 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1003,6 +1003,7 @@ struct dwc2_hregs_backup {
* @ctrl_out_desc: EP0 OUT data phase desc chain pointer
* @irq: Interrupt request line number
* @clk: Pointer to otg clock
+ * @utmi_clk: Pointer to utmi_clk clock
* @reset: Pointer to dwc2 reset controller
* @reset_ecc: Pointer to dwc2 optional reset controller in Stratix10.
* @regset: A pointer to a struct debugfs_regset32, which contains
@@ -1065,6 +1066,7 @@ struct dwc2_hsotg {
void *priv;
int irq;
struct clk *clk;
+ struct clk *utmi_clk;
struct reset_control *reset;
struct reset_control *reset_ecc;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index c431ce6c119f..c4d3d63ebdc3 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -101,10 +101,16 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
if (ret)
return ret;
+ if (hsotg->utmi_clk) {
+ ret = clk_prepare_enable(hsotg->utmi_clk);
+ if (ret)
+ goto err_dis_reg;
+ }
+
if (hsotg->clk) {
ret = clk_prepare_enable(hsotg->clk);
if (ret)
- goto err_dis_reg;
+ goto err_dis_utmi_clk;
}
if (hsotg->uphy) {
@@ -129,6 +135,10 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
+err_dis_utmi_clk:
+ if (hsotg->utmi_clk)
+ clk_disable_unprepare(hsotg->utmi_clk);
+
err_dis_reg:
regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
@@ -171,6 +181,9 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
+ if (hsotg->utmi_clk)
+ clk_disable_unprepare(hsotg->utmi_clk);
+
return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
}
@@ -247,6 +260,11 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
if (IS_ERR(hsotg->clk))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n");
+ hsotg->utmi_clk = devm_clk_get_optional(hsotg->dev, "utmi_clk");
+ if (IS_ERR(hsotg->utmi_clk))
+ return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->utmi_clk),
+ "cannot get utmi clock\n");
+
/* Regulators */
for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
--
2.25.1
Powered by blists - more mailing lists