[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230412161734.3425090-1-fabrice.gasnier@foss.st.com>
Date: Wed, 12 Apr 2023 18:17:34 +0200
From: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To: <heikki.krogerus@...ux.intel.com>, <gregkh@...uxfoundation.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<fabrice.gasnier@...s.st.com>
Subject: [PATCH] usb: typec: ucsi: don't print PPM init deferred errors
ucsi_init() may be deferred as usb_role_sw may be deferred in
ucsi_register_port(). This results in several PPM init failed (-517)
messages maybe printed several times upon boot, like on stm32mp135f-dk
board, until the role_switch driver gets probed.
[ 19.880945] dwc2 49000000.usb: supply vusb_d not found, using dummy regulator
[ 19.887136] dwc2 49000000.usb: supply vusb_a not found, using dummy regulator
[ 19.975432] ucsi-stm32g0-i2c 0-0053: PPM init failed (-517)
[ 20.155746] dwc2 49000000.usb: EPs: 9, dedicated fifos, 952 entries in SPRAM
[ 20.175429] ucsi-stm32g0-i2c 0-0053: PPM init failed (-517)
[ 20.184242] dwc2 49000000.usb: DWC OTG Controller
Adopt dev_err_probe() instead of dev_err(), to only print other errors.
Also print an error in case the wait count has expired.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
---
drivers/usb/typec/ucsi/ucsi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index f632350f6dcb..4d809e0d7761 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1447,11 +1447,13 @@ static void ucsi_init_work(struct work_struct *work)
ret = ucsi_init(ucsi);
if (ret)
- dev_err(ucsi->dev, "PPM init failed (%d)\n", ret);
+ dev_err_probe(ucsi->dev, ret, "PPM init failed\n");
if (ret == -EPROBE_DEFER) {
- if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT)
+ if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT) {
+ dev_err(ucsi->dev, "PPM init failed, stop trying\n");
return;
+ }
queue_delayed_work(system_long_wq, &ucsi->work,
UCSI_ROLE_SWITCH_INTERVAL);
--
2.25.1
Powered by blists - more mailing lists