| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 12 Apr 2023 22:46:27 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Devi Priya <quic_devipriy@...cinc.com>, agross@...nel.org,
andersson@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, mturquette@...libre.com,
sboyd@...nel.org, linus.walleij@...aro.org,
catalin.marinas@....com, will@...nel.org, p.zabel@...gutronix.de,
shawnguo@...nel.org, arnd@...db.de, marcel.ziswiler@...adex.com,
dmitry.baryshkov@...aro.org, geert+renesas@...der.be,
rafal@...ecki.pl, nfraprado@...labora.com, broonie@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: quic_srichara@...cinc.com, quic_gokulsri@...cinc.com,
quic_sjaganat@...cinc.com, quic_kathirav@...cinc.com,
quic_arajkuma@...cinc.com, quic_anusha@...cinc.com,
quic_poovendh@...cinc.com
Subject: Re: [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and
RDP433 variant
On 10.04.2023 15:59, Devi Priya wrote:
> Add initial device tree support for Qualcomm IPQ9574 SoC and
> Reference Design Platform(RDP) 433 which is based on IPQ9574
> family of SoCs
>
> Co-developed-by: Anusha Rao <quic_anusha@...cinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@...cinc.com>
> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@...cinc.com>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@...cinc.com>
> Signed-off-by: Devi Priya <quic_devipriy@...cinc.com>
> ---
> + soc: soc@0 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
this is equal to:
ranges;
Could you fix that up when applying, Bjorn, should there be
no other issues?
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
> +
> + tlmm: pinctrl@...0000 {
> + compatible = "qcom,ipq9574-tlmm";
> + reg = <0x01000000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 65>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + uart2_pins: uart2-state {
> + pins = "gpio34", "gpio35";
> + function = "blsp2_uart";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + gcc: clock-controller@...0000 {
> + compatible = "qcom,ipq9574-gcc";
> + reg = <0x01800000 0x80000>;
> + clocks = <&xo_board_clk>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + sdhc_1: mmc@...4000 {
> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> + reg-names = "hc", "cqhci";
> +
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board_clk>;
> + clock-names = "iface", "core", "xo";
> + non-removable;
> + status = "disabled";
> + };
> +
> + blsp1_uart2: serial@...1000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078b1000 0x200>;
> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + intc: interrupt-controller@...0000 {
> + compatible = "qcom,msm-qgic2";
> + reg = <0x0b000000 0x1000>, /* GICD */
> + <0x0b002000 0x2000>, /* GICC */
> + <0x0b001000 0x1000>, /* GICH */
> + <0x0b004000 0x2000>; /* GICV */
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + ranges = <0 0x0b00c000 0x3000>;
> +
> + v2m0: v2m@0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00000000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m1: v2m@...0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00001000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m2: v2m@...0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00002000 0xffd>;
> + msi-controller;
> + };
> + };
> +
> + timer@...0000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0b120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + frame@...0000 {
> + reg = <0x0b121000 0x1000>,
> + <0x0b122000 0x1000>;
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + frame@...3000 {
> + reg = <0x0b123000 0x1000>;
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@...4000 {
> + reg = <0x0b124000 0x1000>;
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@...5000 {
> + reg = <0x0b125000 0x1000>;
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@...6000 {
> + reg = <0x0b126000 0x1000>;
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@...7000 {
> + reg = <0x0b127000 0x1000>;
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@...8000 {
> + reg = <0x0b128000 0x1000>;
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
Powered by blists - more mailing lists