| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230413083109.5ad09d2a@bootlin.com>
Date: Thu, 13 Apr 2023 08:31:09 +0200
From: Herve Codina <herve.codina@...tlin.com>
To: Lee Jones <lee@...nel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, alsa-devel@...a-project.org,
Christophe Leroy <christophe.leroy@...roup.eu>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v5 2/5] mfd: Add support for the Lantiq PEF2256 framer
On Wed, 12 Apr 2023 10:59:18 +0100
Lee Jones <lee@...nel.org> wrote:
> On Tue, 11 Apr 2023, Herve Codina wrote:
>
> > Hi Lee,
> >
> > On Wed, 5 Apr 2023 18:00:23 +0200
> > Herve Codina <herve.codina@...tlin.com> wrote:
> >
> > > Hi Lee,
> > > On Wed, 5 Apr 2023 14:54:50 +0100
> > > Lee Jones <lee@...nel.org> wrote:
> > >
> > > > On Tue, 04 Apr 2023, Krzysztof Kozlowski wrote:
> > > >
> > > > > On 04/04/2023 10:07, Herve Codina wrote:
> > > > >
> > > > > >>> So, the structure I have in mind:
> > > > > >>> - pef2256.c (MFD)
> > > > > >>> implement and do the setup at probe()
> > > > > >>> Add the children at probe():
> > > > > >>> - pef2256-pinctrl (pinctrl) added using mfd_add_devices()
> > > > > >>> - pef2256-codec (ASoC codec) added using devm_of_platform_populate()
> > > > > >>>
> > > > > >>> Lee, with this in mind, can the core pef2256.c be a MFD driver ?
> > > > > >>
> > > > > >> You do not use MFD here, so why do you want to keep it in MFD? If you
> > > > > >> disagree, please tell me where is the MFD code in your patch?
> > > > > >
> > > > > > I don't want to absolutely use MFD.
> > > > > > I just want to put my driver somewhere and I don't know the right location
> > > > > > between MFD and Misc.
> > > > > >
> > > > > > Basically, the driver needs to do (little simplified and error path removed):
> > > > > >
> > > > > > static const struct mfd_cell pef2256_devs[] = {
> > > > > > { .name = "lantiq-pef2256-pinctrl", },
> > > > > > };
> > > > > >
> > > > > > static int pef2256_probe(struct platform_device *pdev)
> > > > > > {
> > > > > > struct pef2256 *pef2256;
> > > > > > void __iomem *iomem;
> > > > > > int ret;
> > > > > > int irq;
> > > > > >
> > > > > > pef2256 = devm_kzalloc(&pdev->dev, sizeof(*pef2256), GFP_KERNEL);
> > > > > > if (!pef2256)
> > > > > > return -ENOMEM;
> > > > > >
> > > > > > pef2256->dev = &pdev->dev;
> > > > > >
> > > > > > iomem = devm_platform_ioremap_resource(pdev, 0);
> > > > > >
> > > > > > pef2256->regmap = devm_regmap_init_mmio(&pdev->dev, iomem,
> > > > > > &pef2256_regmap_config);
> > > > > >
> > > > > > pef2256->mclk = devm_clk_get_enabled(&pdev->dev, "mclk");
> > > > > > pef2256->sclkr = devm_clk_get_enabled(&pdev->dev, "sclkr");
> > > > > > pef2256->sclkx = devm_clk_get_enabled(&pdev->dev, "sclkx");
> > > > > >
> > > > > > pef2256->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
> > > > > > if (pef2256->reset_gpio) {
> > > > > > gpiod_set_value_cansleep(pef2256->reset_gpio, 1);
> > > > > > udelay(10);
> > > > > > gpiod_set_value_cansleep(pef2256->reset_gpio, 0);
> > > > > > udelay(10);
> > > > > > }
> > > > > >
> > > > > > pef2556_of_parse(pef2256, np);
> > > > > >
> > > > > > irq = platform_get_irq(pdev, 0);
> > > > > > ret = devm_request_irq(pef2256->dev, irq, pef2256_irq_handler, 0, "pef2256", pef2256);
> > > > > >
> > > > > > platform_set_drvdata(pdev, pef2256);
> > > > > >
> > > > > > mfd_add_devices(pef2256->dev, PLATFORM_DEVID_NONE, pef2256_devs,
> > > > > > ARRAY_SIZE(pef2256_devs), NULL, 0, NULL);
> > > > >
> > > > > Wait, now you use MFD framework, so the driver is suitable for MFD.
> > > > > Before there was nothing like that in your code.
> > > >
> > > > Agree, the above is suitable for MFD, since it does all the things I
> > > > said your last one did not. You *can* also use of_platform_populate()
> > > > here, since you are *also* requesting and initialising shared resources.
> > > > You cannot do *both* however.
> > > >
> > >
> > > Thanks for having confirmed that this driver can be a MFD driver.
> > >
> > > Related to of_platform_populate() / mfd_add_devices(), I wanted to use both
> > > because:
> > > - the pinctrl part does not have (and does not need to have) a specific node
> > > with a specific compatible property. In order to instantiate the related
> > > driver mfd_add_devices() is the only way I know.
> > > - the audio component nodes have a compatible string and several components
> > > (ie several nodes) can be present. of_platform_populate() call seems the
> > > simple way to instantiate them.
> > >
> > > Is there a way to use mfd_add_devices() in this case without the need to
> > > count the audio component nodes in order to allocate as much mfd_cell as
> > > nodes having a matching compatible property ? Is there an other API to do
> > > it ?
> > >
> >
> > I looked deeper for using mfd_add_devices() only and found an issue (related
> > to my use-case).
> >
> > mfd_add_devices() calls mfd_add_device() and in this function we have:
> > ---- 8< ----
> > if (IS_ENABLED(CONFIG_OF) && parent->of_node && cell->of_compatible) {
> > for_each_child_of_node(parent->of_node, np) {
> > if (of_device_is_compatible(np, cell->of_compatible)) {
> > /* Ignore 'disabled' devices error free */
> > if (!of_device_is_available(np)) {
> > of_node_put(np);
> > ret = 0;
> > goto fail_alias;
> > }
> >
> > ret = mfd_match_of_node_to_dev(pdev, np, cell);
> > if (ret == -EAGAIN)
> > continue;
> > of_node_put(np);
> > if (ret)
> > goto fail_alias;
> >
> > break;
> > }
> > }
> >
> > if (!pdev->dev.of_node)
> > pr_warn("%s: Failed to locate of_node [id: %d]\n",
> > cell->name, platform_id);
> > }
> > ---- 8< ----
> >
> > My issue is related to the loop.
> > The loop is aborted if the device is not available (typically 'Disabled' in the
> > DT node).
> >
> > My full pef2256 node can have several pef2256 audio subnodes with compatible
> > set to "lantiq,pef2256-codec" and some of them can have 'status = "Disabled";'
> > As soon as one device (with my expected compatible) is found 'Disabled', there
> > is no way to look at other children.
> >
> > Having 'continue' in case of device not available in the loop to look at the
> > next child will change the behavior of mfd_add_device().
> > Do you think that looking at next child if we find a 'not available' child
> > can be correct for mfd_add_device() ?
> > This probably will have impacts on other MFD drivers.
>
> Looks like a bug. Encountering one disabled cell should not prevent the
> others from registering IMHO.
>
Thanks for your confirmation.
I will propose a fix in the next iteration of this series.
Regards,
Hervé
Powered by blists - more mailing lists