[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <541e2684-9df6-b875-df2e-a33ceee7c780@linaro.org>
Date: Thu, 13 Apr 2023 14:11:48 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
Bard Liao <yung-chuan.liao@...ux.intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
Sanyog Kale <sanyog.r.kale@...el.com>,
Rao Mandadapu <quic_srivasam@...cinc.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, alsa-devel@...a-project.org
Cc: Patrick Lai <quic_plai@...cinc.com>
Subject: Re: [PATCH v2 7/7] soundwire: qcom: use tabs for indentation in
defines
On 03/04/2023 14:25, Krzysztof Kozlowski wrote:
> Use consistently only tabs to indent the value in defines.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> ---
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
--srini
> drivers/soundwire/qcom.c | 34 +++++++++++++++++-----------------
> 1 file changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index f2e1135ef113..77a5e4cbbe9b 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -58,9 +58,9 @@
> #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED BIT(10)
> #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED BIT(11)
> #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL BIT(12)
> -#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2 BIT(13)
> -#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2 BIT(14)
> -#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP BIT(16)
> +#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2 BIT(13)
> +#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2 BIT(14)
> +#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP BIT(16)
> #define SWRM_INTERRUPT_MAX 17
> #define SWRM_V1_3_INTERRUPT_MASK_ADDR 0x204
> #define SWRM_V1_3_INTERRUPT_CLEAR 0x208
> @@ -125,20 +125,20 @@
> #define SWRM_REG_VAL_PACK(data, dev, id, reg) \
> ((reg) | ((id) << 16) | ((dev) << 20) | ((data) << 24))
>
> -#define MAX_FREQ_NUM 1
> -#define TIMEOUT_MS 100
> -#define QCOM_SWRM_MAX_RD_LEN 0x1
> -#define QCOM_SDW_MAX_PORTS 14
> -#define DEFAULT_CLK_FREQ 9600000
> -#define SWRM_MAX_DAIS 0xF
> -#define SWR_INVALID_PARAM 0xFF
> -#define SWR_HSTOP_MAX_VAL 0xF
> -#define SWR_HSTART_MIN_VAL 0x0
> -#define SWR_BROADCAST_CMD_ID 0x0F
> -#define SWR_MAX_CMD_ID 14
> -#define MAX_FIFO_RD_RETRY 3
> -#define SWR_OVERFLOW_RETRY_COUNT 30
> -#define SWRM_LINK_STATUS_RETRY_CNT 100
> +#define MAX_FREQ_NUM 1
> +#define TIMEOUT_MS 100
> +#define QCOM_SWRM_MAX_RD_LEN 0x1
> +#define QCOM_SDW_MAX_PORTS 14
> +#define DEFAULT_CLK_FREQ 9600000
> +#define SWRM_MAX_DAIS 0xF
> +#define SWR_INVALID_PARAM 0xFF
> +#define SWR_HSTOP_MAX_VAL 0xF
> +#define SWR_HSTART_MIN_VAL 0x0
> +#define SWR_BROADCAST_CMD_ID 0x0F
> +#define SWR_MAX_CMD_ID 14
> +#define MAX_FIFO_RD_RETRY 3
> +#define SWR_OVERFLOW_RETRY_COUNT 30
> +#define SWRM_LINK_STATUS_RETRY_CNT 100
>
> enum {
> MASTER_ID_WSA = 1,
Powered by blists - more mailing lists