linux-kernel - Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230414202720.GA215111@bhelgaas>
Date:   Fri, 14 Apr 2023 15:27:20 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Jim Quinlan <jim2101024@...il.com>
Cc:     linux-pci@...r.kernel.org,
        Nicolas Saenz Julienne <nsaenz@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Cyril Brulebois <kibi@...ian.org>,
        Phil Elwell <phil@...pberrypi.com>,
        bcm-kernel-feedback-list@...adcom.com, james.quinlan@...adcom.com,
        Florian Fainelli <f.fainelli@...il.com>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Rob Herring <robh@...nel.org>,
        "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" 
        <linux-rpi-kernel@...ts.infradead.org>,
        "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream
 device

This subject line no verb.  Can you add a leading verb to suggest what
this patch does?

s/accomodations/accommodations/

On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
> The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
> deliberately set by the probe() into one of three mutually exclusive modes:
> 
>   (a) No CLKREQ# expected or required, refclk is always available.
>   (b) CLKREQ# is expected to be driven by downstream device when needed.
>   (c) Bidirectional CLKREQ# for L1SS capable devices.
> 
> Previously, only (b) was supported by the driver, as almost all STB/CM
> boards operate in this mode.  But now there is interest in activating L1SS
> power savings from STB/CM customers, and also interest in accomodating mode
> (a) for designs such as the RPi CM4 with IO board.

accommodating

> The HW+driver is able to tell us when mode (a) mode is needed.  But there
> is no easy way to tell if L1SS mode should be configured.  In certain
> situations, getting this wrong may cause a panic during boot time.  So we
> rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
> Using this mode only makes sense when the downstream device is L1SS-capable
> and the OS has been configured to activate L1SS
> (e.g. policy==powersupersave).

I'm really concerned about the user experience here.  I assume users
do not want to edit the DT based on what device they plug in.  They
shouldn't need to (and probably won't) know whether the device
supports L1SS.

I hate kernel/module parameters, but I think even that would be better
then having to edit the DT.

There's obviously a period of time when L1SS is supported but not yet
enabled, so I'm *guessing* the "OS has been configured to activate
L1SS" is not actually a requirement, and choosing (c) really just
opens the possibility that L1SS can be used?

Would be nice to have a hint (maybe a line or two of the panic
message) to help users find the fix for a problem they're seeing.

Obviously the ideal would be if we could use (c) in all cases, so I
assume that's where a panic might happen.  What situation would that
be?  An endpoint that doesn't support L1SS?  One that supports L1SS
but it's not enabled?  Maybe if L1SS isn't configured correctly, e.g.,
LTR values programmed wrong?

Bjorn