[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJppy0bGKQsQFoDZtWgtKrZuU5NLVoteXMbqDR30Var92NA@mail.gmail.com>
Date: Sat, 15 Apr 2023 00:01:37 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Kuogee Hsieh <quic_khsieh@...cinc.com>
Cc: robdclark@...il.com, sean@...rly.run, swboyd@...omium.org,
dianders@...omium.org, vkoul@...nel.org, daniel@...ll.ch,
airlied@...il.com, agross@...nel.org, andersson@...nel.org,
marijn.suijten@...ainline.org, quic_abhinavk@...cinc.com,
quic_sbillaka@...cinc.com, freedreno@...ts.freedesktop.org,
dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] drm/msm/dpu: always program DSC active bits
On Fri, 14 Apr 2023 at 19:46, Kuogee Hsieh <quic_khsieh@...cinc.com> wrote:
>
> In current code, the dsc active bits are set only if the cfg->dsc is set.
> However, for displays which are hot-pluggable, there can be a use-case
> of disconnecting a DSC supported sink and connecting a non-DSC sink.
>
> For those cases we need to clear DSC active bits during teardown.
>
> As discuss at [1], clear DSC active bit will handled at reset_intf_cfg()
nit: discussed
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
> Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
> Reviewed-by: Abhinav Kumar <quic_abhinavk@...cinc.com>
> Reviewed-by: Marijn Suijten <marijn.suijten@...ainline.org>
>
> [1] https://lore.kernel.org/linux-arm-msm/ec045d6b-4ffd-0f8c-4011-8db45edc6978@quicinc.com/
> ---
Changelog? This is v3 already, but it has no changes described.
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index bbdc95c..88e4efe 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -541,10 +541,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> if (cfg->merge_3d)
> DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
> BIT(cfg->merge_3d - MERGE_3D_0));
> - if (cfg->dsc) {
> - DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
> - DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
> - }
> +
And the comment got dropped. Please restore it in some form.
> + DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
> + DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
> }
>
> static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists