| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1681468167-11689-9-git-send-email-quic_srichara@quicinc.com>
Date: Fri, 14 Apr 2023 15:59:26 +0530
From: Sricharan Ramabadhran <quic_srichara@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <ulf.hansson@...aro.org>,
<linus.walleij@...aro.org>, <catalin.marinas@....com>,
<will@...nel.org>, <p.zabel@...gutronix.de>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
<linux-gpio@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <quic_srichara@...cinc.com>
CC: Varadarajan Narayanan <quic_varada@...cinc.com>,
Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
Subject: [PATCH V3 8/9] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
Add initial device tree support for the Qualcomm IPQ5018 SoC and
rdp432-c2 board.
Co-developed-by: Varadarajan Narayanan <quic_varada@...cinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
---
[v3] Fixed all review comments and DTS schema warnings
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 72 +++++++
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 248 +++++++++++++++++++++++++
3 files changed, 321 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e0e2def..bdb4234 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
new file mode 100644
index 0000000..1f3f39f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 MP03.1-C2 board device tree source
+ *
+ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C2";
+ compatible = "qcom,ipq5018-rdp432-c1", "qcom,ipq5018";
+
+ aliases {
+ serial0 = &blsp1_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhc_1 {
+ pinctrl-0 = <&sdc_default_state>;
+ pinctrl-names = "default";
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <192000000>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&tlmm {
+ sdc_default_state: sdc-default-state {
+ clk-pins {
+ pins = "gpio9";
+ function = "sdc1_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio8";
+ function = "sdc1_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "sdc1_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&xo_board_clk {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
new file mode 100644
index 0000000..5e1e31f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 SoC device tree source
+ *
+ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq5018", "qcom,scm";
+ };
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x40000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz_region: tz@...00000 {
+ reg = <0x0 0x4ac00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ tlmm: pinctrl@...0000 {
+ compatible = "qcom,ipq5018-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 47>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart1_pins: uart1-state {
+ pins = "gpio31", "gpio32", "gpio33", "gpio34";
+ function = "blsp1_uart1";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };
+
+ gcc: clock-controller@...0000 {
+ compatible = "qcom,ipq5018-gcc";
+ reg = <0x01800000 0x80000>;
+ clocks = <&xo_board_clk>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ sdhc_1: mmc@...4000 {
+ compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x7804000 0x1000>;
+ reg-names = "hc";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board_clk>;
+ clock-names = "iface", "core", "xo";
+ non-removable;
+ status = "disabled";
+ };
+
+ blsp1_uart1: serial@...f000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@...0000 {
+ compatible = "qcom,msm-qgic2";
+ reg = <0x0b000000 0x1000>, /* GICD */
+ <0x0b002000 0x2000>, /* GICC */
+ <0x0b001000 0x1000>, /* GICH */
+ <0x0b004000 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0b00a000 0x1ffa>;
+
+ v2m0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00000000 0xffd>;
+ msi-controller;
+ };
+
+ v2m1: v2m@...0 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00001000 0xffd>;
+ msi-controller;
+ };
+ };
+
+ timer@...0000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@...0000 {
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <0>;
+ };
+
+ frame@...3000 {
+ reg = <0xb123000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <1>;
+ status = "disabled";
+ };
+
+ frame@...4000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@...5000 {
+ reg = <0x0b125000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <3>;
+ status = "disabled";
+ };
+
+ frame@...6000 {
+ reg = <0x0b126000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <4>;
+ status = "disabled";
+ };
+
+ frame@...7000 {
+ reg = <0x0b127000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <5>;
+ status = "disabled";
+ };
+
+ frame@...8000 {
+ reg = <0x0b128000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <6>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
2.7.4
Powered by blists - more mailing lists