[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a5aa1be1-f98d-af04-9879-b924a5bcb14c@linaro.org>
Date: Fri, 14 Apr 2023 13:21:34 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Bharat Bhushan <bbhushan2@...vell.com>, wim@...ux-watchdog.org,
linux@...ck-us.net, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-watchdog@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: watchdog: marvell octeonTX2 GTI system
atchdog driver
On 14/04/2023 12:23, Bharat Bhushan wrote:
> Add binding documentation for the Marvell octeonTX2
> GTI system watchdog driver.
Subject: typo: atchdog
>
> Signed-off-by: Bharat Bhushan <bbhushan2@...vell.com>
> ---
> .../watchdog/marvell-octeontx2-wdt.yaml | 49 +++++++++++++++++++
> 1 file changed, 49 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/watchdog/marvell-octeontx2-wdt.yaml
>
> diff --git a/Documentation/devicetree/bindings/watchdog/marvell-octeontx2-wdt.yaml b/Documentation/devicetree/bindings/watchdog/marvell-octeontx2-wdt.yaml
> new file mode 100644
> index 000000000000..e509f26c61b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/marvell-octeontx2-wdt.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/marvell-octeontx2-wdt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell OcteonTX2 GTI system watchdog
> +
> +allOf:
> + - $ref: watchdog.yaml#
> +
> +maintainers:
> + - Bharat Bhushan <bbhushan2@...vell.com>
> +
> +properties:
> + compatible:
> + const: marvell-octeontx2-wdt
That's not correct compatible. marvell is a vendor prefix.
Did you test the bindings before sending?
> +
> + reg:
> + maxItems: 1
> + description:
> + OcteonTX2 GTI system watchdog register space
Drop description, it is obvious.
> +
> + interrupts:
> + maxItems: 1
> + description:
> + OcteonTX2 GTI system watchdog interrupt number
Ditto
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
unevaluatedProperties: false instead
> +
> +examples:
> + - |
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + watchdog@...000040000 {
> + compatible = "marvell-octeontx2-wdt";
> + reg = <0x8020 0x40000 0x0 0x20000>;
Are you sure that this is correct DTS? 32-bit numbers are usually
8-digit long. Plus size of 0x20000 is crazy huge. And the unit address
is a bit unusual. Are you sure dtc W=1 does not say about any errors in
your DTS?
> + interrupts = <0 38 1>;
Use defines for common flags.
> + };
> + };
> +
> +...
Best regards,
Krzysztof
Powered by blists - more mailing lists