[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1681481153-24036-1-git-send-email-quic_vnivarth@quicinc.com>
Date: Fri, 14 Apr 2023 19:35:50 +0530
From: Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
To: agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
broonie@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
cros-qcom-dts-watchers@...omium.org, linux-arm-msm@...r.kernel.org,
linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: quic_msavaliy@...cinc.com, dianders@...omium.org, mka@...omium.org,
swboyd@...omium.org, quic_vtanuku@...cinc.com,
Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
Subject: [PATCH v3 0/3] spi: Add DMA mode support to spi-qcom-qspi
There are large number of QSPI irqs that fire during boot/init and later
on every suspend/resume.
This could be made faster by doing DMA instead of PIO.
Below is comparison for number of interrupts raised in 2 acenarios...
Boot up and stabilise
Suspend/Resume
Sequence PIO DMA
=======================
Boot-up 69088 19284
S/R 5066 3430
Though we have not made measurements for speed, power we expect
the performance to be better with DMA mode and no regressions were
encountered in testing.
Vijaya Krishna Nivarthi (3):
spi: dt-bindings: qcom,spi-qcom-qspi: Add iommus
arm64: dts: qcom: sc7280: Add stream-id of qspi to iommus
spi: spi-qcom-qspi: Add DMA mode support
---
v2 -> v3:
- Modified commit messages
- Made a change to driver based on re-review
v1 -> v2:
- Added documentation file to the series
- Made changes to driver based on HPG re-review
---
.../bindings/spi/qcom,spi-qcom-qspi.yaml | 3 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 +
drivers/spi/spi-qcom-qspi.c | 434 +++++++++++++++++++--
3 files changed, 407 insertions(+), 31 deletions(-)
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.
Powered by blists - more mailing lists