[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZDuHEolre/saj8iZ@bombadil.infradead.org>
Date: Sat, 15 Apr 2023 22:26:42 -0700
From: Luis Chamberlain <mcgrof@...nel.org>
To: Matthew Wilcox <willy@...radead.org>
Cc: Hannes Reinecke <hare@...e.de>,
Pankaj Raghav <p.raghav@...sung.com>,
"kbus >> Keith Busch" <kbusch@...nel.org>, brauner@...nel.org,
viro@...iv.linux.org.uk, akpm@...ux-foundation.org,
linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org,
gost.dev@...sung.com
Subject: Re: [RFC 0/4] convert create_page_buffers to create_folio_buffers
On Sun, Apr 16, 2023 at 04:40:06AM +0100, Matthew Wilcox wrote:
> On Sat, Apr 15, 2023 at 06:28:11PM -0700, Luis Chamberlain wrote:
> > On Sat, Apr 15, 2023 at 06:09:12PM +0100, Matthew Wilcox wrote:
> > > On Sat, Apr 15, 2023 at 03:14:33PM +0200, Hannes Reinecke wrote:
> > > > On 4/15/23 05:44, Matthew Wilcox wrote:
> > > > We _could_ upgrade to always do full page I/O; there's a good
> > > > chance we'll be using the entire page anyway eventually.
> >
> > *Iff* doing away with buffer head 512 granularity could help block sizes
> > greater than page size where physical and logical block size > PAGE_SIZE
> > we whould also be able to see it on 4kn drives (logical and physical
> > block size == 4k). A projection could be made after.
> >
> > In so far as experimenting with this, if you already have some
> > effort on IOMAP for bdev aops one possibility for pure experimentation
> > for now would be to peg a new set of aops could be set in the path
> > of __alloc_disk_node() --> bdev_alloc() but that's a wee-bit too early
> > for us to know if the device is has (lbs = pbs) > 512. For NVMe for
> > instance this would be nvme_alloc_ns() --> blk_mq_alloc_disk(). We
> > put together and set the logical and phyiscal block size on NVMe on
> > nvme_update_ns_info() --> nvme_update_disk_info(), right before we
> > call device_add_disk(). The only way to override the aops then would
> > be right before device_add_disk(), or as part of a new device_add_disk_aops()
> > or whatever.
>
> I think you're making this harder than you need to.
> For LBA size > PAGE_SIZE, there is always only going to be
> one BH per folio-that-is-LBA-size, so all the problems with
> more-than-8-BHs-per-4k-page don't actually exist.
Oh! Then yes, sorry!
> I don't think we
> should be overriding the aops, and if we narrow the scope of large folio
> support in blockdev t only supporting folio_size == LBA size, it becomes
> much more feasible.
I'm trying to think of the possible use cases where folio_size != LBA size
and I cannot immediately think of some. Yes there are cases where a
filesystem may use a different block for say meta data than data, but that
I believe is side issue, ie, read/writes for small metadata would have
to be accepted. At least for NVMe we have metadata size as part of the
LBA format, but from what I understand no Linux filesystem yet uses that.
> > > > And with storage bandwidth getting larger and larger we might even
> > > > get a performance boost there.
> > >
> > > I think we need to look at this from the filesystem side.
> >
> > Before that let's recap the bdev cache current issues.
>
> Ooh, yes, this is good! I was totally neglecting the partition
> scanning code.
>
> > Today by just adding the disk we move on to partition scanning
> > immediately unless your block driver has a flag that says otherwise. The
> > current crash we're evaluating with brd and that we also hit with NVMe
> > is due to this part.
> >
> > device_add_disk() -->
> > disk_scan_partitions() -->
> > blkdev_get_whole() -->
> > bdev_disk_changed() -->
> > filemap_read_folio() --> filler()
> >
> > The filler is from aops.
>
> Right, so you missed a step in that callchain, which is
> read_mapping_folio(). That ends up in do_read_cache_folio(), which
> contains the deadly:
>
> folio = filemap_alloc_folio(gfp, 0);
Right and before this we have:
if (!filler)
filler = mapping->a_ops->read_folio;
The folio is order 0 and after filemap_alloc_folio() its added to the
page cache, then filemap_read_folio(file, filler, folio)
uses the filler blkdev_read_folio() --> fs/buffer.c block_read_full_folio()
Just for posterity:
fs/buffer.c
int block_read_full_folio(struct folio *folio, get_block_t *get_block)
{
...
struct buffer_head *bh, *head,...;
...
head = create_page_buffers(&folio->page, inode, 0);
...
}
static struct buffer_head *create_page_buffers(struct page *page, struct inode *inode, unsigned int b_state)
{
BUG_ON(!PageLocked(page));
if (!page_has_buffers(page))
create_empty_buffers(page, 1 << READ_ONCE(inode->i_blkbits),
b_state);
return page_buffers(page);
}
void create_empty_buffers(struct page *page,
unsigned long blocksize, unsigned long b_state)
{
struct buffer_head *bh, *head, *tail;
head = alloc_page_buffers(page, blocksize, true);
bh = head;
do {
bh->b_state |= b_state; -----> CRASH HERE head is NULL
tail = bh;
bh = bh->b_this_page;
} while (bh);
tail->b_this_page = head;
}
Why is it NULL? The blocksize passed to alloc_page_buffers() is larger
than PAGE_SIZE and below offset is PAGE_SIZE. PAGE_SIZE - blocksize
gives a negative number and so the loop is not traversed.
struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size,
bool retry)
{
struct buffer_head *bh, *head;
gfp_t gfp = GFP_NOFS | __GFP_ACCOUNT;
long offset;
struct mem_cgroup *memcg, *old_memcg;
if (retry)
gfp |= __GFP_NOFAIL;
/* The page lock pins the memcg */
memcg = page_memcg(page);
old_memcg = set_active_memcg(memcg);
head = NULL;
offset = PAGE_SIZE;
while ((offset -= size) >= 0) {
bh = alloc_buffer_head(gfp);
if (!bh)
goto no_grow;
bh->b_this_page = head;
bh->b_blocknr = -1;
head = bh;
bh->b_size = size;
/* Link the buffer to its page */
set_bh_page(bh, page, offset);
}
out:
set_active_memcg(old_memcg);
return head;
...
}
I see now what you say about the buffer head being of the block size
bh->b_size = size above.
> so that needs to be changed to get the minimum folio order from the
> mapping, and then it should work.
>
> > > What do filesystems actually want to do?
> >
> > So you are suggesting that the early reads of the block device by the
> > block cache and its use of the page cache cache should be aligned /
> > perhaps redesigned to assist more clearly with what modern filesystems
> > might actually would want today?
>
> Perhaps? I'm just saying the needs of the block device are not the
> only consideration here. I'd like an API that makes sense for the fs
> author.
Makes sense!
> > > The first thing is they want to read
> > > the superblock. That's either going to be immediately freed ("Oh,
> > > this isn't a JFS filesystem after all") or it's going to hang around
> > > indefinitely. There's no particular need to keep it in any kind of
> > > cache (buffer or page).
> >
> > And the bdev cache would not be able to know before hand that's the case.
>
> Right, nobody knows until it's been read and examined.
>
> > > Except ... we want to probe a dozen different
> > > filesystems, and half of them keep their superblock at the same offset
> > > from the start of the block device. So we do want to keep it cached.
> > > That's arguing for using the page cache, at least to read it.
> >
> > Do we currently share anything from the bdev cache with the fs for this?
> > Let's say that first block device blocksize in memory.
>
> sb_bread() is used by most filesystems, and the buffer cache aliases
> into the page cache.
I see thanks. I checked what xfs does and its xfs_readsb() uses its own
xfs_buf_read_uncached(). It ends up calling xfs_buf_submit() and
xfs_buf_ioapply_map() does it's own submit_bio(). So I'm curious why
they did that.
> > > Now, do we want userspace to be able to dd a new superblock into place
> > > and have the mounted filesystem see it?
> >
> > Not sure I follow this. dd a new super block?
>
> In userspace, if I run 'dd if=blah of=/dev/sda1 bs=512 count=1 seek=N',
> I can overwrite the superblock. Do we want filesystems to see that
> kind of vandalism, or do we want the mounted filesystem to have its
> own copy of the data and overwrite what userspace wrote the next time it
> updates the superblock?
Oh, what happens today?
> (the trick is that this may not be vandalism, it might be the sysadmin
> updating the uuid or running some fsck-ish program or trying to update
> the superblock to support fabulous-new-feature on next mount. does this
> change the answer?)
>
> > > I suspect that confuses just
> > > about every filesystem out there. So I think the right answer is to read
> > > the page into the bdev's page cache and then copy it into a kmalloc'ed
> > > buffer which the filesystem is then responsible for freeing. It's also
> > > responsible for writing it back (so that's another API we need), and for
> > > a journalled filesystem, it needs to fit into the journalling scheme.
> > > Also, we may need to write back multiple copies of the superblock,
> > > possibly with slight modifications.
> >
> > Are you considering these as extentions to the bdev cache?
>
> I'm trying to suggest some of the considerations that need to go into
> a replacement for sb_bread().
I see! That would also help EOL buffer heads for that purpose.
Luis
Powered by blists - more mailing lists