| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <45d35b6f6e8d51df788b2bc85c456bfd45476b1a.1681665189.git.william.gray@linaro.org>
Date: Sun, 16 Apr 2023 13:36:55 -0400
From: William Breathitt Gray <william.gray@...aro.org>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Jonathan Cameron <jic23@...nel.org>
Cc: Lars-Peter Clausen <lars@...afoo.de>, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
William Breathitt Gray <william.gray@...aro.org>
Subject: [PATCH 3/3] iio: addac: stx104: Add 8254 Counter/Timer support
The STX104 features an 8254 Counter/Timer chip providing three
counter/timers which can be used for frequency measurement, frequency
output, pulse width modulation, pulse width measurement, event count,
etc. The STX104 provides a register bank selection to bank select
between the 8254 Bank and the Indexed Register Array Bank; the Indexed
Register Array is not utilized by this driver, so the 8254 Bank is
selected unconditionally.
Signed-off-by: William Breathitt Gray <william.gray@...aro.org>
---
drivers/iio/addac/Kconfig | 1 +
drivers/iio/addac/stx104.c | 61 ++++++++++++++++++++++++++++++++++++--
2 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
index 877f9124803c..b2623881f0ec 100644
--- a/drivers/iio/addac/Kconfig
+++ b/drivers/iio/addac/Kconfig
@@ -38,6 +38,7 @@ config STX104
select REGMAP_MMIO
select GPIOLIB
select GPIO_REGMAP
+ select I8254
help
Say yes here to build support for the Apex Embedded Systems STX104
integrated analog PC/104 card.
diff --git a/drivers/iio/addac/stx104.c b/drivers/iio/addac/stx104.c
index d1f7ce033b46..6946a65512ca 100644
--- a/drivers/iio/addac/stx104.c
+++ b/drivers/iio/addac/stx104.c
@@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/regmap.h>
+#include <linux/i8254.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
#include <linux/isa.h>
@@ -55,6 +56,7 @@ MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
#define STX104_ADC_STATUS (STX104_AIO_BASE + 0x8)
#define STX104_ADC_CONTROL (STX104_AIO_BASE + 0x9)
#define STX104_ADC_CONFIGURATION (STX104_AIO_BASE + 0x11)
+#define STX104_I8254_BASE (STX104_AIO_BASE + 0x12)
#define STX104_AIO_DATA_STRIDE 2
#define STX104_DAC_OFFSET(_channel) (STX104_DAC_BASE + STX104_AIO_DATA_STRIDE * (_channel))
@@ -77,6 +79,7 @@ MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
/* ADC Configuration */
#define STX104_GAIN GENMASK(1, 0)
#define STX104_ADBU BIT(2)
+#define STX104_RBK GENMASK(7, 4)
#define STX104_BIPOLAR 0
#define STX104_GAIN_X1 0
#define STX104_GAIN_X2 1
@@ -168,6 +171,32 @@ static const struct regmap_config dio_regmap_config = {
.io_port = true,
};
+static const struct regmap_range pit_wr_ranges[] = {
+ regmap_reg_range(0x0, 0x3),
+};
+static const struct regmap_range pit_rd_ranges[] = {
+ regmap_reg_range(0x0, 0x2),
+};
+static const struct regmap_access_table pit_wr_table = {
+ .yes_ranges = pit_wr_ranges,
+ .n_yes_ranges = ARRAY_SIZE(pit_wr_ranges),
+};
+static const struct regmap_access_table pit_rd_table = {
+ .yes_ranges = pit_rd_ranges,
+ .n_yes_ranges = ARRAY_SIZE(pit_rd_ranges),
+};
+
+static const struct regmap_config pit_regmap_config = {
+ .name = "i8254",
+ .reg_bits = 8,
+ .reg_stride = 1,
+ .reg_base = STX104_I8254_BASE,
+ .val_bits = 8,
+ .io_port = true,
+ .wr_table = &pit_wr_table,
+ .rd_table = &pit_rd_table,
+};
+
static int stx104_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
@@ -339,6 +368,21 @@ static const char *stx104_names[STX104_NGPIO] = {
"DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3"
};
+static int bank_select_i8254(struct regmap *map)
+{
+ const u8 select_i8254[] = { 0x3, 0xB, 0xA };
+ size_t i;
+ int err;
+
+ for (i = 0; i < ARRAY_SIZE(select_i8254); i++) {
+ err = regmap_write_bits(map, STX104_ADC_CONFIGURATION, STX104_RBK, select_i8254[i]);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
static int stx104_init_hw(struct stx104_iio *const priv)
{
int err;
@@ -361,7 +405,7 @@ static int stx104_init_hw(struct stx104_iio *const priv)
if (err)
return err;
- return 0;
+ return bank_select_i8254(priv->aio_ctl_map);
}
static int stx104_probe(struct device *dev, unsigned int id)
@@ -369,6 +413,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
struct iio_dev *indio_dev;
struct stx104_iio *priv;
struct gpio_regmap_config gpio_config;
+ struct i8254_regmap_config pit_config;
void __iomem *stx104_base;
struct regmap *aio_ctl_map;
struct regmap *aio_data_map;
@@ -406,6 +451,11 @@ static int stx104_probe(struct device *dev, unsigned int id)
return dev_err_probe(dev, PTR_ERR(dio_map),
"Unable to initialize dio register map\n");
+ pit_config.map = devm_regmap_init_mmio(dev, stx104_base, &pit_regmap_config);
+ if (IS_ERR(pit_config.map))
+ return dev_err_probe(dev, PTR_ERR(pit_config.map),
+ "Unable to initialize i8254 register map\n");
+
priv = iio_priv(indio_dev);
priv->aio_ctl_map = aio_ctl_map;
priv->aio_data_map = aio_data_map;
@@ -449,7 +499,13 @@ static int stx104_probe(struct device *dev, unsigned int id)
.drvdata = dio_map,
};
- return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config));
+ err = PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config));
+ if (err)
+ return err;
+
+ pit_config.parent = dev;
+
+ return devm_i8254_regmap_register(dev, &pit_config);
}
static struct isa_driver stx104_driver = {
@@ -464,3 +520,4 @@ module_isa_driver(stx104_driver, num_stx104);
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@...il.com>");
MODULE_DESCRIPTION("Apex Embedded Systems STX104 IIO driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(I8254);
--
2.39.2
Powered by blists - more mailing lists