Date:   Mon, 17 Apr 2023 12:09:37 +1000
From:   Dave Chinner <dchinner@...hat.com>
To:     Thomas Gleixner <tglx@...utronix.de>
Cc:     LKML <linux-kernel@...r.kernel.org>,
        Peter Zijlstra <peterz@...radead.org>,
        Valentin Schneider <vschneid@...hat.com>,
        Dennis Zhou <dennis@...nel.org>, Tejun Heo <tj@...nel.org>,
        Christoph Lameter <cl@...ux.com>,
        Yury Norov <yury.norov@...il.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Rasmus Villemoes <linux@...musvillemoes.dk>,
        Ye Bin <yebin10@...wei.com>, linux-mm@...ck.org
Subject: Re: [patch 1/3] lib/percpu_counter: Fix CPU hotplug handling

On Fri, Apr 14, 2023 at 06:30:43PM +0200, Thomas Gleixner wrote:
> Commit 8b57b11cca88 ("pcpcntrs: fix dying cpu summation race") tried to
> address a race condition between percpu_counter_sum() and a concurrent CPU
> hotplug operation.
> 
> The race window is between the point where an un-plugged CPU removed itself
> from the online_cpu_mask and the hotplug state callback which folds the per
> CPU counters of the now dead CPU into the global count.
> 
> percpu_counter_sum() used for_each_online_cpu() to accumulate the per CPU
> local counts, so during the race window it missed to account for the not
> yet folded back local count of the offlined CPU.
> 
> The attempt to address this used the admittedly undocumented and
> pointlessly public cpu_dying_mask by changing the loop iterator to take
> both the cpu_online_mask and the cpu_dying_mask into account.
> 
> That works to some extent, but it is incorrect.
> 
> The cpu_dying_mask bits are sticky even after cpu_up()/cpu_down()
> completes. That means that all offlined CPUs are always taken into
> account. In the case of disabling SMT at boottime or runtime this results
> in evaluating _all_ offlined SMT siblings counters forever.  Depending on
> system size, that's a massive amount of cache-lines to be touched forever.
> 
> It might be argued, that the cpu_dying_mask bit could be cleared when
> cpu_down() completes, but that's not possible under all circumstances.
> 
> Especially with partial hotplug the bit must be sticky in order to keep the
> initial user, i.e. the scheduler correct. Partial hotplug which allows
> explicit state transitions also can create a situation where the race
> window gets recreated:
> 
>        cpu_down(target = CPUHP_PERCPU_CNT_DEAD + 1)
> 
> brings a CPU down to one state before the per CPU counter folding
> callback. As this did not reach CPUHP_OFFLINE state the bit would stay set.
> Now the next partial operation:
> 
>        cpu_up(target = CPUHP_PERCPU_CNT_DEAD + 2)
> 
> has to clear the bit and the race window is open again.
> 
> There are two ways to solve this:
> 
>   1) Maintain a local CPU mask in the per CPU counter code which
>      gets the bit set when a CPU comes online and removed in the
>      the CPUHP_PERCPU_CNT_DEAD state after folding.
> 
>      This adds more code and complexity.
> 
>   2) Move the folding hotplug state into the DYING callback section, which
>      runs on the outgoing CPU immediatedly after it cleared its online bit.
> 
>      There is no concurrency vs. percpu_counter_sum() on another CPU
>      because all still online CPUs are waiting in stop_machine() for the
>      outgoing CPU to complete its shutdown. The raw spinlock held around
>      the CPU mask iteration prevents that an online CPU reaches the stop
>      machine thread while iterating, which implicitely prevents the
>      outgoing CPU from clearing its online bit.
> 
>      This is way simpler than #1 and makes the hotplug calls symmetric for
>      the price of a slightly longer wait time in stop_machine(), which is
>      not the end of the world as CPU un-plug is already slow. The overall
>      time for a cpu_down() operation stays exactly the same.
> 
> Implement #2 and plug the race completely.
> 
> percpu_counter_sum() is still inherently racy against a concurrent
> percpu_counter_add_batch() fastpath unless externally serialized.  That's
> completely independent of CPU hotplug though.
> 
> Fixes: 8b57b11cca88 ("pcpcntrs: fix dying cpu summation race")
> Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
> Cc: Dennis Zhou <dennis@...nel.org>
> Cc: Tejun Heo <tj@...nel.org>
> Cc: Christoph Lameter <cl@...ux.com>
> Cc: Dave Chinner <dchinner@...hat.com>
> Cc: Yury Norov <yury.norov@...il.com>
> Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> Cc: Rasmus Villemoes <linux@...musvillemoes.dk>
> Cc: Ye Bin <yebin10@...wei.com>
> Cc: linux-mm@...ck.org
> ---
>  include/linux/cpuhotplug.h |    2 -
>  lib/percpu_counter.c       |   57 +++++++++++++++++++--------------------------
>  2 files changed, 26 insertions(+), 33 deletions(-)
> 
> --- a/include/linux/cpuhotplug.h
> +++ b/include/linux/cpuhotplug.h
> @@ -91,7 +91,6 @@ enum cpuhp_state {
>  	CPUHP_PRINTK_DEAD,
>  	CPUHP_MM_MEMCQ_DEAD,
>  	CPUHP_XFS_DEAD,
> -	CPUHP_PERCPU_CNT_DEAD,
>  	CPUHP_RADIX_DEAD,
>  	CPUHP_PAGE_ALLOC,
>  	CPUHP_NET_DEV_DEAD,
> @@ -196,6 +195,7 @@ enum cpuhp_state {
>  	CPUHP_AP_SMPCFD_DYING,
>  	CPUHP_AP_X86_TBOOT_DYING,
>  	CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
> +	CPUHP_AP_PERCPU_COUNTER_STARTING,
>  	CPUHP_AP_ONLINE,
>  	CPUHP_TEARDOWN_CPU,
>  
> --- a/lib/percpu_counter.c
> +++ b/lib/percpu_counter.c
> @@ -12,7 +12,7 @@
>  
>  #ifdef CONFIG_HOTPLUG_CPU
>  static LIST_HEAD(percpu_counters);
> -static DEFINE_SPINLOCK(percpu_counters_lock);
> +static DEFINE_RAW_SPINLOCK(percpu_counters_lock);
>  #endif
>  
>  #ifdef CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER
> @@ -126,13 +126,8 @@ EXPORT_SYMBOL(percpu_counter_sync);
>   * Add up all the per-cpu counts, return the result.  This is a more accurate
>   * but much slower version of percpu_counter_read_positive().
>   *
> - * We use the cpu mask of (cpu_online_mask | cpu_dying_mask) to capture sums
> - * from CPUs that are in the process of being taken offline. Dying cpus have
> - * been removed from the online mask, but may not have had the hotplug dead
> - * notifier called to fold the percpu count back into the global counter sum.
> - * By including dying CPUs in the iteration mask, we avoid this race condition
> - * so __percpu_counter_sum() just does the right thing when CPUs are being taken
> - * offline.
> + * Note: This function is inherently racy against the lockless fastpath of
> + * percpu_counter_add_batch() unless externaly serialized.
>   */
>  s64 __percpu_counter_sum(struct percpu_counter *fbc)
>  {
> @@ -142,10 +137,8 @@ s64 __percpu_counter_sum(struct percpu_c
>  
>  	raw_spin_lock_irqsave(&fbc->lock, flags);
>  	ret = fbc->count;
> -	for_each_cpu_or(cpu, cpu_online_mask, cpu_dying_mask) {
> -		s32 *pcount = per_cpu_ptr(fbc->counters, cpu);
> -		ret += *pcount;
> -	}
> +	for_each_online_cpu(cpu)
> +		ret += *per_cpu_ptr(fbc->counters, cpu);
>  	raw_spin_unlock_irqrestore(&fbc->lock, flags);
>  	return ret;
>  }
> @@ -167,9 +160,9 @@ int __percpu_counter_init(struct percpu_
>  
>  #ifdef CONFIG_HOTPLUG_CPU
>  	INIT_LIST_HEAD(&fbc->list);
> -	spin_lock_irqsave(&percpu_counters_lock, flags);
> +	raw_spin_lock_irqsave(&percpu_counters_lock, flags);
>  	list_add(&fbc->list, &percpu_counters);
> -	spin_unlock_irqrestore(&percpu_counters_lock, flags);
> +	raw_spin_unlock_irqrestore(&percpu_counters_lock, flags);
>  #endif
>  	return 0;
>  }
> @@ -185,9 +178,9 @@ void percpu_counter_destroy(struct percp
>  	debug_percpu_counter_deactivate(fbc);
>  
>  #ifdef CONFIG_HOTPLUG_CPU
> -	spin_lock_irqsave(&percpu_counters_lock, flags);
> +	raw_spin_lock_irqsave(&percpu_counters_lock, flags);
>  	list_del(&fbc->list);
> -	spin_unlock_irqrestore(&percpu_counters_lock, flags);
> +	raw_spin_unlock_irqrestore(&percpu_counters_lock, flags);
>  #endif
>  	free_percpu(fbc->counters);
>  	fbc->counters = NULL;
> @@ -197,22 +190,29 @@ EXPORT_SYMBOL(percpu_counter_destroy);
>  int percpu_counter_batch __read_mostly = 32;
>  EXPORT_SYMBOL(percpu_counter_batch);
>  
> -static int compute_batch_value(unsigned int cpu)
> +static void compute_batch_value(int offs)
>  {
> -	int nr = num_online_cpus();
> +	int nr = num_online_cpus() + offs;
> +
> +	percpu_counter_batch = max(32, nr * 2);
> +}
>  
> -	percpu_counter_batch = max(32, nr*2);
> +static int percpu_counter_cpu_starting(unsigned int cpu)
> +{
> +	/* If invoked during hotplug @cpu is not yet marked online. */
> +	compute_batch_value(cpu_online(cpu) ? 0 : 1);
>  	return 0;
>  }

So this changes the batch size based on whether the CPU is starting
or dying to try to get _compare() to fall into the slow path correctly?

How is this supposed to work with counters that have caller supplied
custom batch sizes? i.e. use percpu_counter_add_batch() and
__percpu_counter_compare() with their own batch sizes directly?
Do they now need to add their own cpu hotplug hooks to
screw around with their batch sizes as well?

-Dave.
-- 
Dave Chinner
dchinner@...hat.com

Powered by blists - more mailing lists