[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d873df36-44d3-b98e-7e34-db6446292f32@huawei.com>
Date: Mon, 17 Apr 2023 16:18:33 +0800
From: yangxingui <yangxingui@...wei.com>
To: Jason Yan <yanaijie@...wei.com>, <jejb@...ux.ibm.com>,
<martin.petersen@...cle.com>, <john.g.garry@...cle.com>
CC: <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linuxarm@...wei.com>, <prime.zeng@...ilicon.com>,
<kangfenglong@...wei.com>
Subject: Re: [PATCH] scsi: libsas: set tf to normal in
sas_ata_device_link_abort()
Hi Jason
On 2023/4/14 15:36, Jason Yan wrote:
> On 2023/4/7 11:56, Xingui Yang wrote:
>> If the disk returns UNC for more than five times within a short
>> period, the
>> number of retry times for other I/Os may reach scmd->allowed, and the
>> default error "Illegal Request" is returned for other I/Os, as follows:
>>
>> [ 273.801770] hisi_sas_v3_hw 0000:b4:02.0: erroneous completion disk
>> err dev id=2 sas_addr=0x5000000000000605 CQ hdr: 0x400903 0x20103 0x0
>> 0x80470000
>> [ 273.875286] sas: Enter sas_scsi_recover_host busy: 30 failed: 30
>> [ 273.879895] sas: trying to find task 0x00000000d9cfc893
>> [ 273.879896] sas: sas_scsi_find_task: aborting task 0x00000000d9cfc893
>> [ 273.880054] sas: sas_scsi_find_task: task 0x00000000d9cfc893 is done
>> [ 273.880055] sas: sas_eh_handle_sas_errors: task 0x00000000d9cfc893
>> is done
>> [ 273.880236] ata6.00: failed command: READ FPDMA QUEUED
>> [ 273.880238] ata6.00: cmd 60/08:00:59:27:00/00:00:00:00:00/40 tag 22
>> ncq dma 4096 in
>> res 41/04:00:20:00:00/00:00:00:00:00/00 Emask
>> 0x1 (device error)
>> [ 273.880239] ata6.00: status: { DRDY ERR }
>> [ 273.880240] ata6.00: error: { ABRT }
>> [ 273.880241] ata6.00: failed command: READ FPDMA QUEUED
>> [ 273.880243] ata6.00: cmd 60/90:00:d1:26:00/00:00:00:00:00/40 tag 23
>> ncq dma 73728 in
>> res 41/40:90:10:27:00/00:00:00:00:00/00 Emask
>> 0x409 (media error) <F>
>> [ 273.880245] ata6.00: status: { DRDY ERR }
>> [ 273.880246] ata6.00: error: { UNC }
>> [ 273.880247] ata6.00: failed command: READ FPDMA QUEUED
>> [ 273.880249] ata6.00: cmd 60/08:00:19:27:00/00:00:00:00:00/40 tag 24
>> ncq dma 4096 in
>> res 41/04:00:20:00:00/00:00:00:00:00/00 Emask
>> 0x1 (device error)
>> [ 273.880250] ata6.00: status: { DRDY ERR }
>> [ 273.880251] ata6.00: error: { ABRT }
>> [ 274.199477] scmd->retries: 3, scmd->allowed: 5
>> [ 274.199478] scmd->retries: 3, scmd->allowed: 5
>> [ 274.199479] scmd->retries: 3, scmd->allowed: 5
>> [ 274.199481] scmd->retries: 3, scmd->allowed: 5
>> [ 274.199482] scmd->retries: 3, scmd->allowed: 5
>> [ 274.199483] scmd->retries: 2, scmd->allowed: 5
>> [ 274.199484] scmd->retries: 3, scmd->allowed: 5
>> [ 274.199485] scmd->retries: 3, scmd->allowed: 5
>> [ 274.199486] scmd->retries: 5, scmd->allowed: 5
>> [ 274.199487] scmd->retries: 2, scmd->allowed: 5
>> [ 274.199488] scmd->retries: 2, scmd->allowed: 5
>> [ 274.199524] sd 6:0:1:0: [sdb] tag#258 FAILED Result:
>> hostbyte=DID_OK driverbyte=DRIVER_SENSE
>> [ 274.199527] sd 6:0:1:0: [sdb] tag#258 Sense Key : Illegal Request
>> [current]
>> [ 274.199530] sd 6:0:1:0: [sdb] tag#258 Add. Sense: Unaligned write
>> command
>> [ 274.199532] sd 6:0:1:0: [sdb] tag#258 CDB: Read(10) 28 00 00 00 27
>> 59 00 00 08 00
>> [ 274.199535] print_req_error: I/O error, dev sdb, sector 10073
>> [ 274.199573] sd 6:0:1:0: [sdb] tag#259 FAILED Result:
>> hostbyte=DID_OK driverbyte=DRIVER_SENSE
>> [ 274.199574] sd 6:0:1:0: [sdb] tag#259 Sense Key : Medium Error
>> [current]
>> [ 274.199576] sd 6:0:1:0: [sdb] tag#259 Add. Sense: Unrecovered read
>> error - auto reallocate failed
>> [ 274.199578] sd 6:0:1:0: [sdb] tag#259 CDB: Read(10) 28 00 00 00 26
>> d1 00 00 90 00
>> [ 274.199579] print_req_error: I/O error, dev sdb, sector 10000
>> [ 274.199608] ata6: EH complete
>> [ 274.199615] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 30
>> tries: 1
>>
>> As mentioned in ata_eh_qc_retry(), if qc->err_mask is zero then increment
>> scmd->allowed. So set tf to normal may be better.
>
> Hi Xingui,
>
> If we increase scmd->allowed every time, and the device returns UNC for
> too many times, will the other IO pending for too long and cause
> hungtask? And also the runtime check in scsi_cmd_runtime_exceeced() will
> not trigger since cmd->allowed is extended.
>
Thank you for your reply. In scenarios similar to UNC error, where a
disk returns an error through D2H or SDB, no error is reported for other
I/Os in the disk. In this case, AHCI will increase the number of retry
times for other I/Os, and AHCI may face similar problems you say, but
default failures may not be very good for users.
In addition, for commands with pass through type, other I/Os are
immediately returned with default errors and are not retried, but AHCI
only report one single error I/O.
Thanks,
Xingui
> Thanks,
> Jason
>
>>
>> Signed-off-by: Xingui Yang <yangxingui@...wei.com>
>> ---
>> drivers/scsi/libsas/sas_ata.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/scsi/libsas/sas_ata.c
>> b/drivers/scsi/libsas/sas_ata.c
>> index 77714a495cbb..f5047e8dcb59 100644
>> --- a/drivers/scsi/libsas/sas_ata.c
>> +++ b/drivers/scsi/libsas/sas_ata.c
>> @@ -949,8 +949,8 @@ void sas_ata_device_link_abort(struct
>> domain_device *device, bool force_reset)
>> unsigned long flags;
>> spin_lock_irqsave(ap->lock, flags);
>> - device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY; /* tf status */
>> - device->sata_dev.fis[3] = ATA_ABORTED; /* tf error */
>> + device->sata_dev.fis[2] = ATA_DRDY; /* tf status */
>> + device->sata_dev.fis[3] = 0; /* tf error */
>> link->eh_info.err_mask |= AC_ERR_DEV;
>> if (force_reset)
>>
> .
Powered by blists - more mailing lists