| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5c21f6b7-8c7e-6e42-fe02-c8fd3ae64016@linaro.org>
Date: Mon, 17 Apr 2023 11:59:59 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
rafael@...nel.org, rui.zhang@...el.com
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] thermal/drivers/intel/int340x: Add DLVR support
Hi Rafael,
do you want me to pick this patch ?
On 13/04/2023 23:37, Srinivas Pandruvada wrote:
> Add support for DLVR (Digital Linear Voltage Regulator) attributes,
> which can be used to control RFIM.
> Here instead of "fivr" another directory "dlvr" is created with DLVR
> attributes:
>
> /sys/bus/pci/devices/0000:00:04.0/dlvr
> ├── dlvr_freq_mhz
> ├── dlvr_freq_select
> ├── dlvr_hardware_rev
> ├── dlvr_pll_busy
> ├── dlvr_rfim_enable
> └── dlvr_spread_spectrum_pct
> └── dlvr_control_mode
> └── dlvr_control_lock
>
> Attributes
> dlvr_freq_mhz (RO):
> Current DLVR PLL frequency in MHz.
>
> dlvr_freq_select (RW):
> Sets DLVR PLL clock frequency.
>
> dlvr_hardware_rev (RO):
> DLVR hardware revision.
>
> dlvr_pll_busy (RO):
> PLL can't accept frequency change when set.
>
> dlvr_rfim_enable (RW):
> 0: Disable RF frequency hopping, 1: Enable RF frequency hopping.
>
> dlvr_control_mode (RW):
> Specifies how frequencies are spread. 0: Down spread, 1: Spread in Center.
>
> dlvr_control_lock (RW):
> 1: future writes are ignored.
>
> dlvr_spread_spectrum_pct (RW)
> A write to this register updates the DLVR spread spectrum percent value.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
> ---
> v2
> - Updated documentation
> - Added dlvr_control_lock attribute
>
> .../driver-api/thermal/intel_dptf.rst | 46 +++++++++-
> .../processor_thermal_device.c | 3 +-
> .../processor_thermal_device.h | 1 +
> .../processor_thermal_device_pci.c | 2 +-
> .../int340x_thermal/processor_thermal_rfim.c | 92 ++++++++++++++++++-
> 5 files changed, 135 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst
> index f5c193cccbda..9ab4316322a1 100644
> --- a/Documentation/driver-api/thermal/intel_dptf.rst
> +++ b/Documentation/driver-api/thermal/intel_dptf.rst
> @@ -184,8 +184,9 @@ ABI.
> DPTF Processor thermal RFIM interface
> --------------------------------------------
>
> -RFIM interface allows adjustment of FIVR (Fully Integrated Voltage Regulator)
> -and DDR (Double Data Rate)frequencies to avoid RF interference with WiFi and 5G.
> +RFIM interface allows adjustment of FIVR (Fully Integrated Voltage Regulator),
> +DDR (Double Data Rate) and DLVR (Digital Linear Voltage Regulator)
> +frequencies to avoid RF interference with WiFi and 5G.
>
> Switching voltage regulators (VR) generate radiated EMI or RFI at the
> fundamental frequency and its harmonics. Some harmonics may interfere
> @@ -196,6 +197,15 @@ small % and shift away the switching noise harmonic interference from
> radio channels. OEM or ODMs can use the driver to control SOC IVR
> operation within the range where it does not impact IVR performance.
>
> +Some products use DLVR instead of FIVR as switching voltage regulator.
> +In this case attributes of DLVR must be adjusted instead of FIVR.
> +
> +While shifting the frequencies additional clock noise can be introduced,
> +which is compensated by adjusting Spread spectrum percent. This helps
> +to reduce the clock noise to meet regulatory compliance. This spreading
> +% increases bandwidth of signal transmission and hence reduces the
> +effects of interference, noise and signal fading.
> +
> DRAM devices of DDR IO interface and their power plane can generate EMI
> at the data rates. Similar to IVR control mechanism, Intel offers a
> mechanism by which DDR data rates can be changed if several conditions
> @@ -264,6 +274,38 @@ DVFS attributes
> ``rfi_disable (RW)``
> Disable DDR rate change feature
>
> +DLVR attributes
> +
> +:file:`/sys/bus/pci/devices/0000\:00\:04.0/dlvr/`
> +
> +``dlvr_hardware_rev`` (RO)
> + DLVR hardware revision.
> +
> +``dlvr_freq_mhz`` (RO)
> + Current DLVR PLL frequency in MHz.
> +
> +``dlvr_freq_select`` (RW)
> + Sets DLVR PLL clock frequency. Once set, and enabled via
> + dlvr_rfim_enable, the dlvr_freq_mhz will show the current
> + DLVR PLL frequency.
> +
> +``dlvr_pll_busy`` (RO)
> + PLL can't accept frequency change when set.
> +
> +``dlvr_rfim_enable`` (RW)
> + 0: Disable RF frequency hopping, 1: Enable RF frequency hopping.
> +
> +``dlvr_spread_spectrum_pct`` (RW)
> + Sets DLVR spread spectrum percent value.
> +
> +``dlvr_control_mode`` (RW)
> + Specifies how frequencies are spread using spread spectrum.
> + 0: Down spread,
> + 1: Spread in the Center.
> +
> +``dlvr_control_lock`` (RW)
> + 1: future writes are ignored.
> +
> DPTF Power supply and Battery Interface
> ----------------------------------------
>
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> index a1dc18be7609..3ca0a2f5937f 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> @@ -337,7 +337,8 @@ int proc_thermal_mmio_add(struct pci_dev *pdev,
> }
>
> if (feature_mask & PROC_THERMAL_FEATURE_FIVR ||
> - feature_mask & PROC_THERMAL_FEATURE_DVFS) {
> + feature_mask & PROC_THERMAL_FEATURE_DVFS ||
> + feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> ret = proc_thermal_rfim_add(pdev, proc_priv);
> if (ret) {
> dev_err(&pdev->dev, "failed to add RFIM interface\n");
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> index 7d52fcff4937..7acaa8f1b896 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> @@ -60,6 +60,7 @@ struct rapl_mmio_regs {
> #define PROC_THERMAL_FEATURE_FIVR 0x02
> #define PROC_THERMAL_FEATURE_DVFS 0x04
> #define PROC_THERMAL_FEATURE_MBOX 0x08
> +#define PROC_THERMAL_FEATURE_DLVR 0x10
>
> #if IS_ENABLED(CONFIG_PROC_THERMAL_MMIO_RAPL)
> int proc_thermal_rapl_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> index d71ee50e7878..8b260dd9221b 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> @@ -351,7 +351,7 @@ static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
>
> static const struct pci_device_id proc_thermal_pci_ids[] = {
> { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> - { PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> + { PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX | PROC_THERMAL_FEATURE_DLVR) },
> { PCI_DEVICE_DATA(INTEL, RPL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> { },
> };
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> index 92ed1213fe37..546b70434004 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> @@ -39,6 +39,29 @@ static const struct mmio_reg tgl_fivr_mmio_regs[] = {
> { 1, 0x5A14, 2, 0x3, 1}, /* fivr_fffc_rev */
> };
>
> +static const char * const dlvr_strings[] = {
> + "dlvr_spread_spectrum_pct",
> + "dlvr_control_mode",
> + "dlvr_control_lock",
> + "dlvr_rfim_enable",
> + "dlvr_freq_select",
> + "dlvr_hardware_rev",
> + "dlvr_freq_mhz",
> + "dlvr_pll_busy",
> + NULL
> +};
> +
> +static const struct mmio_reg dlvr_mmio_regs[] = {
> + { 0, 0x15A08, 5, 0x1F, 0}, /* dlvr_spread_spectrum_pct */
> + { 0, 0x15A08, 1, 0x1, 5}, /* dlvr_control_mode */
> + { 0, 0x15A08, 1, 0x1, 6}, /* dlvr_control_lock */
> + { 0, 0x15A08, 1, 0x1, 7}, /* dlvr_rfim_enable */
> + { 0, 0x15A08, 12, 0xFFF, 8}, /* dlvr_freq_select */
> + { 1, 0x15A10, 2, 0x3, 30}, /* dlvr_hardware_rev */
> + { 1, 0x15A10, 16, 0xFFFF, 0}, /* dlvr_freq_mhz */
> + { 1, 0x15A10, 1, 0x1, 16}, /* dlvr_pll_busy */
> +};
> +
> /* These will represent sysfs attribute names */
> static const char * const dvfs_strings[] = {
> "rfi_restriction_run_busy",
> @@ -78,14 +101,16 @@ static ssize_t suffix##_show(struct device *dev,\
> int ret;\
> \
> proc_priv = pci_get_drvdata(pdev);\
> - if (table) {\
> + if (table == 1) {\
> match_strs = (const char **)dvfs_strings;\
> mmio_regs = adl_dvfs_mmio_regs;\
> - } else { \
> + } else if (table == 2) { \
> + match_strs = (const char **)dlvr_strings;\
> + mmio_regs = dlvr_mmio_regs;\
> + } else {\
> match_strs = (const char **)fivr_strings;\
> mmio_regs = tgl_fivr_mmio_regs;\
> } \
> - \
> ret = match_string(match_strs, -1, attr->attr.name);\
> if (ret < 0)\
> return ret;\
> @@ -109,10 +134,13 @@ static ssize_t suffix##_store(struct device *dev,\
> u32 mask;\
> \
> proc_priv = pci_get_drvdata(pdev);\
> - if (table) {\
> + if (table == 1) {\
> match_strs = (const char **)dvfs_strings;\
> mmio_regs = adl_dvfs_mmio_regs;\
> - } else { \
> + } else if (table == 2) { \
> + match_strs = (const char **)dlvr_strings;\
> + mmio_regs = dlvr_mmio_regs;\
> + } else {\
> match_strs = (const char **)fivr_strings;\
> mmio_regs = tgl_fivr_mmio_regs;\
> } \
> @@ -147,6 +175,47 @@ RFIM_STORE(spread_spectrum_clk_enable, 0)
> RFIM_STORE(rfi_vco_ref_code, 0)
> RFIM_STORE(fivr_fffc_rev, 0)
>
> +RFIM_SHOW(dlvr_spread_spectrum_pct, 2)
> +RFIM_SHOW(dlvr_control_mode, 2)
> +RFIM_SHOW(dlvr_control_lock, 2)
> +RFIM_SHOW(dlvr_hardware_rev, 2)
> +RFIM_SHOW(dlvr_freq_mhz, 2)
> +RFIM_SHOW(dlvr_pll_busy, 2)
> +RFIM_SHOW(dlvr_freq_select, 2)
> +RFIM_SHOW(dlvr_rfim_enable, 2)
> +
> +RFIM_STORE(dlvr_spread_spectrum_pct, 2)
> +RFIM_STORE(dlvr_rfim_enable, 2)
> +RFIM_STORE(dlvr_freq_select, 2)
> +RFIM_STORE(dlvr_control_mode, 2)
> +RFIM_STORE(dlvr_control_lock, 2)
> +
> +static DEVICE_ATTR_RW(dlvr_spread_spectrum_pct);
> +static DEVICE_ATTR_RW(dlvr_control_mode);
> +static DEVICE_ATTR_RW(dlvr_control_lock);
> +static DEVICE_ATTR_RW(dlvr_freq_select);
> +static DEVICE_ATTR_RO(dlvr_hardware_rev);
> +static DEVICE_ATTR_RO(dlvr_freq_mhz);
> +static DEVICE_ATTR_RO(dlvr_pll_busy);
> +static DEVICE_ATTR_RW(dlvr_rfim_enable);
> +
> +static struct attribute *dlvr_attrs[] = {
> + &dev_attr_dlvr_spread_spectrum_pct.attr,
> + &dev_attr_dlvr_control_mode.attr,
> + &dev_attr_dlvr_control_lock.attr,
> + &dev_attr_dlvr_freq_select.attr,
> + &dev_attr_dlvr_hardware_rev.attr,
> + &dev_attr_dlvr_freq_mhz.attr,
> + &dev_attr_dlvr_pll_busy.attr,
> + &dev_attr_dlvr_rfim_enable.attr,
> + NULL
> +};
> +
> +static const struct attribute_group dlvr_attribute_group = {
> + .attrs = dlvr_attrs,
> + .name = "dlvr"
> +};
> +
> static DEVICE_ATTR_RW(vco_ref_code_lo);
> static DEVICE_ATTR_RW(vco_ref_code_hi);
> static DEVICE_ATTR_RW(spread_spectrum_pct);
> @@ -277,12 +346,22 @@ int proc_thermal_rfim_add(struct pci_dev *pdev, struct proc_thermal_device *proc
> return ret;
> }
>
> + if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> + ret = sysfs_create_group(&pdev->dev.kobj, &dlvr_attribute_group);
> + if (ret)
> + return ret;
> + }
> +
> if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS) {
> ret = sysfs_create_group(&pdev->dev.kobj, &dvfs_attribute_group);
> if (ret && proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR) {
> sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
> return ret;
> }
> + if (ret && proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> + sysfs_remove_group(&pdev->dev.kobj, &dlvr_attribute_group);
> + return ret;
> + }
> }
>
> return 0;
> @@ -296,6 +375,9 @@ void proc_thermal_rfim_remove(struct pci_dev *pdev)
> if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR)
> sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
>
> + if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR)
> + sysfs_remove_group(&pdev->dev.kobj, &dlvr_attribute_group);
> +
> if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS)
> sysfs_remove_group(&pdev->dev.kobj, &dvfs_attribute_group);
> }
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Powered by blists - more mailing lists