| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a33e2d43-d6a6-f830-8421-ec68baf8159d@quicinc.com>
Date: Mon, 17 Apr 2023 18:52:17 +0530
From: Mukesh Ojha <quic_mojha@...cinc.com>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <corbet@....net>,
<keescook@...omium.org>, <tony.luck@...el.com>,
<gpiccoli@...lia.com>, <catalin.marinas@....com>, <will@...nel.org>
CC: <linux-arm-msm@...r.kernel.org>,
<linux-remoteproc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-hardening@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-doc@...r.kernel.org>
Subject: Re: [PATCH v2 2/6] remoteproc: qcom: Move minidump specific data to
qcom_minidump.h
On 4/14/2023 4:10 PM, Srinivas Kandagatla wrote:
>
>
> On 14/04/2023 08:05, Mukesh Ojha wrote:
>> Thanks again for coming back on this.
>>
>> On 4/14/2023 4:02 AM, Srinivas Kandagatla wrote:
>>>
>>>
>>> On 22/03/2023 13:30, Mukesh Ojha wrote:
>>>> Move minidump specific data types and macros to a separate internal
>>>> header(qcom_minidump.h) so that it can be shared among different
>>>
>>> minidump.h should be good as we are already in include/soc/qcom/
>>
>>
>> Initially, i wanted to protect the content of qcom_minidump.h between
>> qcom_minidump.c and qcom_common.c
>>
>> Ideally, here qcom_minidump.h should be supplier/provider header and can
>
> Am not sure if I understand the supplier concept correctly.
> AFAIU, we have a 2 sets of apis
>
> 1. get hold of minidump descriptor based on minidump_id fro gtoc using
> qcom_minidump_subsystem_desc(). Am assuming which ever driver uses this
> api will set there segments and regions in there respective drivers.
>
> 2. setting regions/segments in APSS minidump descriptors which are done
> via qcom_minidump_region_register(). TBH this should be renamed to
> qcom_apss_minidump_region_register().
>
> mixing of thsee apis makes it bit confusing, specially we have these two
> category of apis that deal with different things.
>
> Does it make sense to spit and abstract them properly by doing?
>
>
> 1. minidump driver to deal with handling gtoc and providing descriptors
> to the consumers like remoteproc or apss, This can probably live within
> smem driver as loc for this support is very minimal and proabably rename
> the api accordingly.
>
> 2. apss_minidump driver to allow other qcom drivers to
> register/unregister regions within apss minidump descriptor.
>
> did I miss something?
No, you are correct with your understanding.
To your suggestion to split code and to keep
qcom_minidump_subsystem_desc() live inside smem driver,
And how about the header qcom_minidump.h, should we keep it separate
than the apss minidump client header minidump.h ?
Since, you kind of understand the driver now, do you think it is worth
to create platform device for minidump from smem driver, and
have a probe inside apss minidump driver to solve chicken and egg
problem for the clients who comes before minidump and try to register
itself without doing ready check and apss_minidump can note this client
entry and only register this region once minidump probe success and then
it can register all the noted clients in one go.
The reason to do this would be apss_minidump driver has no meaning
without smem, and for this reason checking qcom_minidump_ready() would
not be ideal for at least qcom clients and for core kernel may be.
--Mukesh
>
> thanks,
> Srini
>
>> be shared among above qcom_minidump.c and qcom_common.c but since they
>> are not in same directory, moved it inside include/soc/qcom/ as
>> separate header than consumer header minidump.h . >
>> -Mukesh
>>>
>>> --srini
>>>
>>>> Qualcomm drivers.
>>>>
>>>> There is no change in functional behavior after this.
>>>>
>>>> Signed-off-by: Mukesh Ojha <quic_mojha@...cinc.com>
>>>> ---
>>>> drivers/remoteproc/qcom_common.c | 56
>>>> +---------------------------------
>>>> include/soc/qcom/qcom_minidump.h | 66
>>>> ++++++++++++++++++++++++++++++++++++++++
>>>> 2 files changed, 67 insertions(+), 55 deletions(-)
>>>> create mode 100644 include/soc/qcom/qcom_minidump.h
>>>>
>>>> diff --git a/drivers/remoteproc/qcom_common.c
>>>> b/drivers/remoteproc/qcom_common.c
>>>> index 805e525..88fc984 100644
>>>> --- a/drivers/remoteproc/qcom_common.c
>>>> +++ b/drivers/remoteproc/qcom_common.c
>>>> @@ -18,6 +18,7 @@
>>>> #include <linux/slab.h>
>>>> #include <linux/soc/qcom/mdt_loader.h>
>>>> #include <linux/soc/qcom/smem.h>
>>>> +#include <soc/qcom/qcom_minidump.h>
>>>> #include "remoteproc_internal.h"
>>>> #include "qcom_common.h"
>>>> @@ -26,61 +27,6 @@
>>>> #define to_smd_subdev(d) container_of(d, struct qcom_rproc_subdev,
>>>> subdev)
>>>> #define to_ssr_subdev(d) container_of(d, struct qcom_rproc_ssr,
>>>> subdev)
>>>> -#define MAX_NUM_OF_SS 10
>>>> -#define MAX_REGION_NAME_LENGTH 16
>>>> -#define SBL_MINIDUMP_SMEM_ID 602
>>>> -#define MINIDUMP_REGION_VALID ('V' << 24 | 'A' << 16 | 'L'
>>>> << 8 | 'I' << 0)
>>>> -#define MINIDUMP_SS_ENCR_DONE ('D' << 24 | 'O' << 16 | 'N'
>>>> << 8 | 'E' << 0)
>>>> -#define MINIDUMP_SS_ENABLED ('E' << 24 | 'N' << 16 | 'B' <<
>>>> 8 | 'L' << 0)
>>>> -
>>>> -/**
>>>> - * struct minidump_region - Minidump region
>>>> - * @name : Name of the region to be dumped
>>>> - * @seq_num: : Use to differentiate regions with same name.
>>>> - * @valid : This entry to be dumped (if set to 1)
>>>> - * @address : Physical address of region to be dumped
>>>> - * @size : Size of the region
>>>> - */
>>>> -struct minidump_region {
>>>> - char name[MAX_REGION_NAME_LENGTH];
>>>> - __le32 seq_num;
>>>> - __le32 valid;
>>>> - __le64 address;
>>>> - __le64 size;
>>>> -};
>>>> -
>>>> -/**
>>>> - * struct minidump_subsystem - Subsystem's SMEM Table of content
>>>> - * @status : Subsystem toc init status
>>>> - * @enabled : if set to 1, this region would be copied during coredump
>>>> - * @encryption_status: Encryption status for this subsystem
>>>> - * @encryption_required : Decides to encrypt the subsystem regions
>>>> or not
>>>> - * @region_count : Number of regions added in this subsystem toc
>>>> - * @regions_baseptr : regions base pointer of the subsystem
>>>> - */
>>>> -struct minidump_subsystem {
>>>> - __le32 status;
>>>> - __le32 enabled;
>>>> - __le32 encryption_status;
>>>> - __le32 encryption_required;
>>>> - __le32 region_count;
>>>> - __le64 regions_baseptr;
>>>> -};
>>>> -
>>>> -/**
>>>> - * struct minidump_global_toc - Global Table of Content
>>>> - * @status : Global Minidump init status
>>>> - * @md_revision : Minidump revision
>>>> - * @enabled : Minidump enable status
>>>> - * @subsystems : Array of subsystems toc
>>>> - */
>>>> -struct minidump_global_toc {
>>>> - __le32 status;
>>>> - __le32 md_revision;
>>>> - __le32 enabled;
>>>> - struct minidump_subsystem subsystems[MAX_NUM_OF_SS];
>>>> -};
>>>> -
>>>> struct qcom_ssr_subsystem {
>>>> const char *name;
>>>> struct srcu_notifier_head notifier_list;
>>>> diff --git a/include/soc/qcom/qcom_minidump.h
>>>> b/include/soc/qcom/qcom_minidump.h
>>>> new file mode 100644
>>>> index 0000000..84c8605
>>>> --- /dev/null
>>>> +++ b/include/soc/qcom/qcom_minidump.h
>>>> @@ -0,0 +1,66 @@
>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>> +/*
>>>> + * Qualcomm minidump shared data structures and macros
>>>> + *
>>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>>>> reserved.
>>>> + */
>>>> +
>>>> +#ifndef _QCOM_MINIDUMP_H_
>>>> +#define _QCOM_MINIDUMP_H_
>>>> +
>>>> +#define MAX_NUM_OF_SS 10
>>>> +#define MAX_REGION_NAME_LENGTH 16
>>>> +#define SBL_MINIDUMP_SMEM_ID 602
>>>> +#define MINIDUMP_REGION_VALID ('V' << 24 | 'A' << 16 | 'L'
>>>> << 8 | 'I' << 0)
>>>> +#define MINIDUMP_SS_ENCR_DONE ('D' << 24 | 'O' << 16 | 'N'
>>>> << 8 | 'E' << 0)
>>>> +#define MINIDUMP_SS_ENABLED ('E' << 24 | 'N' << 16 | 'B' <<
>>>> 8 | 'L' << 0)
>>>> +
>>>> +/**
>>>> + * struct minidump_region - Minidump region
>>>> + * @name : Name of the region to be dumped
>>>> + * @seq_num: : Use to differentiate regions with same name.
>>>> + * @valid : This entry to be dumped (if set to 1)
>>>> + * @address : Physical address of region to be dumped
>>>> + * @size : Size of the region
>>>> + */
>>>> +struct minidump_region {
>>>> + char name[MAX_REGION_NAME_LENGTH];
>>>> + __le32 seq_num;
>>>> + __le32 valid;
>>>> + __le64 address;
>>>> + __le64 size;
>>>> +};
>>>> +
>>>> +/**
>>>> + * struct minidump_subsystem - Subsystem's SMEM Table of content
>>>> + * @status : Subsystem toc init status
>>>> + * @enabled : if set to 1, this region would be copied during coredump
>>>> + * @encryption_status: Encryption status for this subsystem
>>>> + * @encryption_required : Decides to encrypt the subsystem regions
>>>> or not
>>>> + * @region_count : Number of regions added in this subsystem toc
>>>> + * @regions_baseptr : regions base pointer of the subsystem
>>>> + */
>>>> +struct minidump_subsystem {
>>>> + __le32 status;
>>>> + __le32 enabled;
>>>> + __le32 encryption_status;
>>>> + __le32 encryption_required;
>>>> + __le32 region_count;
>>>> + __le64 regions_baseptr;
>>>> +};
>>>> +
>>>> +/**
>>>> + * struct minidump_global_toc - Global Table of Content
>>>> + * @status : Global Minidump init status
>>>> + * @md_revision : Minidump revision
>>>> + * @enabled : Minidump enable status
>>>> + * @subsystems : Array of subsystems toc
>>>> + */
>>>> +struct minidump_global_toc {
>>>> + __le32 status;
>>>> + __le32 md_revision;
>>>> + __le32 enabled;
>>>> + struct minidump_subsystem subsystems[MAX_NUM_OF_SS];
>>>> +};
>>>> +
>>>> +#endif /* _QCOM_MINIDUMP_H_ */
Powered by blists - more mailing lists