lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230418064707.GC4703@pendragon.ideasonboard.com>
Date:   Tue, 18 Apr 2023 09:47:07 +0300
From:   Laurent Pinchart <laurent.pinchart@...asonboard.com>
To:     Arnd Bergmann <arnd@...nel.org>
Cc:     Arnd Bergmann <arnd@...db.de>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        Jacopo Mondi <jacopo.mondi@...asonboard.com>,
        Dong Aisheng <aisheng.dong@....com>,
        Guoniu Zhou <guoniu.zhou@....com>,
        Christian Hemp <c.hemp@...tec.de>, linux-media@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] [v2] media: nxp: imx8-isi: fix buiding on 32-bit

Hi Arnd,

Thank you for the patch.

On Tue, Apr 18, 2023 at 08:11:43AM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@...db.de>
> 
> The #if check is wrong, leading to a build failure:
> 
> drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf':
> drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef]
>    33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT
>       |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> This could just be an #ifdef, but it seems nicer to just remove
> the check entirely. Apparently the only reason for the #ifdef
> is to avoid another warning:
> 
> drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow]
> 
> But this is best avoided by using the lower_32_bits()/upper_32_bits()
> helpers.
> 
> Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
> Signed-off-by: Arnd Bergmann <arnd@...db.de>

Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>

Mauro, could you please pick this up for v6.4 ?

> ---
> v2: whitespace fixup
> ---
>  .../media/platform/nxp/imx8-isi/imx8-isi-hw.c | 41 ++++++++++---------
>  1 file changed, 21 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> index db538f3d88ec..19e80b95ffea 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> @@ -29,11 +29,10 @@ static inline void mxc_isi_write(struct mxc_isi_pipe *pipe, u32 reg, u32 val)
>  
>  void mxc_isi_channel_set_inbuf(struct mxc_isi_pipe *pipe, dma_addr_t dma_addr)
>  {
> -	mxc_isi_write(pipe, CHNL_IN_BUF_ADDR, dma_addr);
> -#if CONFIG_ARCH_DMA_ADDR_T_64BIT
> +	mxc_isi_write(pipe, CHNL_IN_BUF_ADDR, lower_32_bits(dma_addr));
>  	if (pipe->isi->pdata->has_36bit_dma)
> -		mxc_isi_write(pipe, CHNL_IN_BUF_XTND_ADDR, dma_addr >> 32);
> -#endif
> +		mxc_isi_write(pipe, CHNL_IN_BUF_XTND_ADDR,
> +			      upper_32_bits(dma_addr));
>  }
>  
>  void mxc_isi_channel_set_outbuf(struct mxc_isi_pipe *pipe,
> @@ -45,34 +44,36 @@ void mxc_isi_channel_set_outbuf(struct mxc_isi_pipe *pipe,
>  	val = mxc_isi_read(pipe, CHNL_OUT_BUF_CTRL);
>  
>  	if (buf_id == MXC_ISI_BUF1) {
> -		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_Y, dma_addrs[0]);
> -		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_U, dma_addrs[1]);
> -		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_V, dma_addrs[2]);
> -#if CONFIG_ARCH_DMA_ADDR_T_64BIT
> +		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_Y,
> +			      lower_32_bits(dma_addrs[0]));
> +		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_U,
> +			      lower_32_bits(dma_addrs[1]));
> +		mxc_isi_write(pipe, CHNL_OUT_BUF1_ADDR_V,
> +			      lower_32_bits(dma_addrs[2]));
>  		if (pipe->isi->pdata->has_36bit_dma) {
>  			mxc_isi_write(pipe, CHNL_Y_BUF1_XTND_ADDR,
> -				      dma_addrs[0] >> 32);
> +				      upper_32_bits(dma_addrs[0]));
>  			mxc_isi_write(pipe, CHNL_U_BUF1_XTND_ADDR,
> -				      dma_addrs[1] >> 32);
> +				      upper_32_bits(dma_addrs[1]));
>  			mxc_isi_write(pipe, CHNL_V_BUF1_XTND_ADDR,
> -				      dma_addrs[2] >> 32);
> +				      upper_32_bits(dma_addrs[2]));
>  		}
> -#endif
>  		val ^= CHNL_OUT_BUF_CTRL_LOAD_BUF1_ADDR;
>  	} else  {
> -		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_Y, dma_addrs[0]);
> -		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_U, dma_addrs[1]);
> -		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_V, dma_addrs[2]);
> -#if CONFIG_ARCH_DMA_ADDR_T_64BIT
> +		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_Y,
> +			      lower_32_bits(dma_addrs[0]));
> +		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_U,
> +			      lower_32_bits(dma_addrs[1]));
> +		mxc_isi_write(pipe, CHNL_OUT_BUF2_ADDR_V,
> +			      lower_32_bits(dma_addrs[2]));
>  		if (pipe->isi->pdata->has_36bit_dma) {
>  			mxc_isi_write(pipe, CHNL_Y_BUF2_XTND_ADDR,
> -				      dma_addrs[0] >> 32);
> +				      upper_32_bits(dma_addrs[0]));
>  			mxc_isi_write(pipe, CHNL_U_BUF2_XTND_ADDR,
> -				      dma_addrs[1] >> 32);
> +				      upper_32_bits(dma_addrs[1]));
>  			mxc_isi_write(pipe, CHNL_V_BUF2_XTND_ADDR,
> -				      dma_addrs[2] >> 32);
> +				      upper_32_bits(dma_addrs[2]));
>  		}
> -#endif
>  		val ^= CHNL_OUT_BUF_CTRL_LOAD_BUF2_ADDR;
>  	}
>  

-- 
Regards,

Laurent Pinchart

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ