linux-kernel - [PATCH v3 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230418095447.577001-3-krzysztof.kozlowski@linaro.org>
Date:   Tue, 18 Apr 2023 11:54:42 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Vinod Koul <vkoul@...nel.org>,
        Bard Liao <yung-chuan.liao@...ux.intel.com>,
        Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
        Sanyog Kale <sanyog.r.kale@...el.com>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Rao Mandadapu <quic_srivasam@...cinc.com>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, alsa-devel@...a-project.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Rob Herring <robh@...nel.org>
Subject: [PATCH v3 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

The port sample interval was always 16-bit, split into low and high
bytes.  This split was unnecessary, although harmless for older devices
because all of them used only lower byte (so values < 0xff).  With
support for Soundwire controller on Qualcomm SM8550 and its devices,
both bytes will be used, thus add a new 'qcom,ports-sinterval' property
to allow 16-bit sample intervals.

Reviewed-by: Rob Herring <robh@...nel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>

---

Changes since v2:
1. Use uint16 for qcom,ports-sinterval.
   DTS will be fixed in separate patchset.
2. Add tags.
---
 .../bindings/soundwire/qcom,soundwire.yaml    | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index 98c7fc7e1189..fb44b89a754e 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -86,7 +86,7 @@ properties:
   qcom,ports-sinterval-low:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
-      Sample interval low of each data port.
+      Sample interval (only lowest byte) of each data port.
       Out ports followed by In ports. Used for Sample Interval calculation.
       Value of 0xff indicates that this option is not implemented
       or applicable for the respective data port.
@@ -94,6 +94,17 @@ properties:
     minItems: 3
     maxItems: 16
 
+  qcom,ports-sinterval:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description:
+      Sample interval of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xffff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
   qcom,ports-offset1:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
@@ -220,10 +231,15 @@ required:
   - '#size-cells'
   - qcom,dout-ports
   - qcom,din-ports
-  - qcom,ports-sinterval-low
   - qcom,ports-offset1
   - qcom,ports-offset2
 
+oneOf:
+  - required:
+      - qcom,ports-sinterval-low
+  - required:
+      - qcom,ports-sinterval
+
 additionalProperties: false
 
 examples:
-- 
2.34.1