| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230418130223.wvsu3bsm62i2gtpp@ripper>
Date: Tue, 18 Apr 2023 06:02:23 -0700
From: Bjorn Andersson <andersson@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sm6115: Set up CPU cooling maps
On Tue, Apr 18, 2023 at 01:56:56PM +0200, Konrad Dybcio wrote:
> Set up CPU cooling maps to ensure the thermal framework is aware of
> the connection between the CPUs and the TSENS sensors.
>
> All of the maps refer to all 4 CPUs within a given cluster at a time,
> as that's what can be considered the smallest DVFS target unit - they
> all share the same voltage line and clock source.
>
Generally software based CPU cooling is considered too slow to cope with
CPU core temperature changes, and the limits hardware working together
with OSM/EPSS will do a better job maintaining appropriate core
temperature levels.
Is there a reason why this can't be used/relied upon on this platform?
PS. Amending this mechanism with software based cooling to keep the
system at a reasonable/lower temperature is a good idea.
Regards,
Bjorn
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 137 +++++++++++++++++++++++++++++++++++
> 1 file changed, 137 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..36ff913c1a60 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -12,6 +12,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> interrupt-parent = <&intc>;
> @@ -47,6 +48,8 @@ CPU0: cpu@0 {
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> + #cooling-cells = <2>;
> +
> L2_0: l2-cache {
> compatible = "cache";
> cache-level = <2>;
> @@ -63,6 +66,7 @@ CPU1: cpu@1 {
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> + #cooling-cells = <2>;
> };
>
> CPU2: cpu@2 {
> @@ -75,6 +79,7 @@ CPU2: cpu@2 {
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> + #cooling-cells = <2>;
> };
>
> CPU3: cpu@3 {
> @@ -87,6 +92,7 @@ CPU3: cpu@3 {
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> + #cooling-cells = <2>;
> };
>
> CPU4: cpu@100 {
> @@ -99,6 +105,8 @@ CPU4: cpu@100 {
> dynamic-power-coefficient = <282>;
> next-level-cache = <&L2_1>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> + #cooling-cells = <2>;
> +
> L2_1: l2-cache {
> compatible = "cache";
> cache-level = <2>;
> @@ -115,6 +123,7 @@ CPU5: cpu@101 {
> enable-method = "psci";
> next-level-cache = <&L2_1>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> + #cooling-cells = <2>;
> };
>
> CPU6: cpu@102 {
> @@ -127,6 +136,7 @@ CPU6: cpu@102 {
> enable-method = "psci";
> next-level-cache = <&L2_1>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> + #cooling-cells = <2>;
> };
>
> CPU7: cpu@103 {
> @@ -139,6 +149,7 @@ CPU7: cpu@103 {
> enable-method = "psci";
> next-level-cache = <&L2_1>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> + #cooling-cells = <2>;
> };
>
> cpu-map {
> @@ -2471,6 +2482,24 @@ cpu4-thermal {
> polling-delay = <0>;
> thermal-sensors = <&tsens0 6>;
>
> + cooling-maps {
> + map0 {
> + trip = <&cpu4_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu4_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> trips {
> cpu4_alert0: trip-point0 {
> temperature = <90000>;
> @@ -2497,6 +2526,24 @@ cpu5-thermal {
> polling-delay = <0>;
> thermal-sensors = <&tsens0 7>;
>
> + cooling-maps {
> + map0 {
> + trip = <&cpu5_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu5_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> trips {
> cpu5_alert0: trip-point0 {
> temperature = <90000>;
> @@ -2523,6 +2570,24 @@ cpu6-thermal {
> polling-delay = <0>;
> thermal-sensors = <&tsens0 8>;
>
> + cooling-maps {
> + map0 {
> + trip = <&cpu6_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu6_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> trips {
> cpu6_alert0: trip-point0 {
> temperature = <90000>;
> @@ -2549,6 +2614,24 @@ cpu7-thermal {
> polling-delay = <0>;
> thermal-sensors = <&tsens0 9>;
>
> + cooling-maps {
> + map0 {
> + trip = <&cpu7_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu7_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> trips {
> cpu7_alert0: trip-point0 {
> temperature = <90000>;
> @@ -2575,6 +2658,24 @@ cpu45-thermal {
> polling-delay = <0>;
> thermal-sensors = <&tsens0 10>;
>
> + cooling-maps {
> + map0 {
> + trip = <&cpu45_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu45_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> trips {
> cpu45_alert0: trip-point0 {
> temperature = <90000>;
> @@ -2601,6 +2702,24 @@ cpu67-thermal {
> polling-delay = <0>;
> thermal-sensors = <&tsens0 11>;
>
> + cooling-maps {
> + map0 {
> + trip = <&cpu67_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu67_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> trips {
> cpu67_alert0: trip-point0 {
> temperature = <90000>;
> @@ -2627,6 +2746,24 @@ cpu0123-thermal {
> polling-delay = <0>;
> thermal-sensors = <&tsens0 12>;
>
> + cooling-maps {
> + map0 {
> + trip = <&cpu0123_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu0123_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +
> trips {
> cpu0123_alert0: trip-point0 {
> temperature = <90000>;
>
> ---
> base-commit: 4aa1da8d99724f6c0b762b58a71cee7c5e2e109b
> change-id: 20230418-topic-cool_bengal-2f5f3f47269c
>
> Best regards,
> --
> Konrad Dybcio <konrad.dybcio@...aro.org>
>
Powered by blists - more mailing lists