linux-kernel - [PATCH 2/2] arm64: dts: mt7622: handle interrupts from MT7531 switch on BPI-R64

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 19 Apr 2023 20:16:29 +0100
From:   Daniel Golle <daniel@...rotopia.org>
To:     devicetree@...r.kernel.org, linux-mediatek@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
Subject: [PATCH 2/2] arm64: dts: mt7622: handle interrupts from MT7531 switch
 on BPI-R64

Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support")
the mt7530 driver can act as an interrupt controller. Wire up irq line
of the MT7531 switch on the BananaPi BPi-R64 board, so the status of
the PHYs of the five 1000Base-T ports doesn't need to be polled any
more.

Signed-off-by: Daniel Golle <daniel@...rotopia.org>
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d583e816684cf..aabd104b12acf 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -150,6 +150,10 @@ mdio: mdio-bus {
 		switch@0 {
 			compatible = "mediatek,mt7531";
 			reg = <0>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&pio>;
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&pio 54 0>;
 
 			ports {
-- 
2.40.0