[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230419175538.855493-7-pankaj.gupta@nxp.com>
Date: Wed, 19 Apr 2023 23:25:37 +0530
From: Pankaj Gupta <pankaj.gupta@....com>
To: shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, linux-imx@....com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
gaurav.jain@....com, sahil.malhotra@....com, aisheng.dong@....com,
V.Sethi@....com
Cc: Pankaj Gupta <pankaj.gupta@....com>,
kernel test robot <lkp@...el.com>
Subject: [PATCH v2 6/7] firmware: imx: add ELE MU driver support
The Edgelock Enclave Message Unit (ELE MU), is a message based
communication channel, to communicated with ELE Firmware.
This runs on a dedicated MU present between application core and
ELE H/W IP. It exists on some i.MX processors. e.g. i.MX8ULP, i.MX93
This patch implements the mail-box based communication with
ELE firmware.
Signed-off-by: Gaurav Jain <gaurav.jain@....com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@....com>
Reported-by: kernel test robot <lkp@...el.com>
---
drivers/firmware/imx/Kconfig | 11 +
drivers/firmware/imx/Makefile | 2 +
drivers/firmware/imx/ele_base_msg.c | 378 ++++++
drivers/firmware/imx/ele_mu.c | 1285 +++++++++++++++++++++
drivers/firmware/imx/ele_mu.h | 174 +++
include/linux/firmware/imx/ele_base_msg.h | 67 ++
include/linux/firmware/imx/ele_mu_ioctl.h | 52 +
7 files changed, 1969 insertions(+)
create mode 100644 drivers/firmware/imx/ele_base_msg.c
create mode 100644 drivers/firmware/imx/ele_mu.c
create mode 100644 drivers/firmware/imx/ele_mu.h
create mode 100644 include/linux/firmware/imx/ele_base_msg.h
create mode 100644 include/linux/firmware/imx/ele_mu_ioctl.h
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
index c027d99f2a59..eef6c6a8b61d 100644
--- a/drivers/firmware/imx/Kconfig
+++ b/drivers/firmware/imx/Kconfig
@@ -28,3 +28,14 @@ config IMX_SCU_PD
depends on IMX_SCU
help
The System Controller Firmware (SCFW) based power domain driver.
+
+config IMX_EL_ENCLAVE
+ tristate "i.MX Embedded EdgeLock Enclave support."
+ depends on IMX_MBOX && ARCH_MXC && ARM64
+ default m if ARCH_MXC
+
+ help
+ It is possible to use APIs exposed by the iMX EdgeLock Enclave like base, HSM &
+ SHE using the SAB protocol via the shared Messaging Unit. This driver exposes
+ these interfaces via a set of file descriptors allowing to configure shared
+ memory, send and receive messages.
diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
index b76acbade2a0..886385e79bf2 100644
--- a/drivers/firmware/imx/Makefile
+++ b/drivers/firmware/imx/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_IMX_DSP) += imx-dsp.o
obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o
obj-$(CONFIG_IMX_SCU_PD) += scu-pd.o
+el_enclave-objs = ele_mu.o ele_base_msg.o
+obj-${CONFIG_IMX_EL_ENCLAVE} += el_enclave.o
diff --git a/drivers/firmware/imx/ele_base_msg.c b/drivers/firmware/imx/ele_base_msg.c
new file mode 100644
index 000000000000..34221288dfd1
--- /dev/null
+++ b/drivers/firmware/imx/ele_base_msg.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021-2023 NXP
+ */
+
+#include <linux/types.h>
+#include <linux/completion.h>
+
+#include <linux/firmware/imx/ele_base_msg.h>
+#include <linux/firmware/imx/ele_mu_ioctl.h>
+
+#include "ele_mu.h"
+
+/* Fill a command message header with a given command ID and length in bytes. */
+static int plat_fill_cmd_msg_hdr(struct mu_hdr *hdr,
+ uint8_t cmd,
+ uint32_t len)
+{
+ struct ele_mu_priv *priv = NULL;
+ int err;
+
+ err = get_ele_mu_priv(&priv);
+ if (err) {
+ pr_err("Error: iMX EdgeLock Enclave MU, used before probing.\n");
+ return err;
+ }
+
+ hdr->tag = priv->cmd_tag;
+ hdr->ver = ELE_BASE_API_VERSION;
+ hdr->command = cmd;
+ hdr->size = len >> 2;
+
+ return err;
+}
+
+static u32 plat_add_msg_crc(uint32_t *msg, uint32_t msg_len)
+{
+ uint32_t i;
+ uint32_t crc = 0;
+ uint32_t nb_words = msg_len >> 2;
+
+ for (i = 0; i < nb_words - 1; i++)
+ crc ^= *(msg + i);
+
+ return crc;
+}
+
+int imx_ele_msg_send_rcv(struct ele_mu_priv *priv)
+{
+ unsigned int wait;
+ int err;
+
+ mutex_lock(&priv->mu_cmd_lock);
+ mutex_lock(&priv->mu_lock);
+
+ err = mbox_send_message(priv->tx_chan, &priv->tx_msg);
+ if (err < 0) {
+ pr_err("Error: mbox_send_message failure.\n");
+ mutex_unlock(&priv->mu_lock);
+ return err;
+ }
+ mutex_unlock(&priv->mu_lock);
+
+ wait = msecs_to_jiffies(1000);
+ if (!wait_for_completion_timeout(&priv->done, wait)) {
+ pr_err("Error: wait_for_completion timed out.\n");
+ err = -ETIMEDOUT;
+ }
+
+ mutex_unlock(&priv->mu_cmd_lock);
+ /* As part of func ele_mu_rx_callback() execution,
+ * response will copied to ele_msg->rsp_msg.
+ *
+ * Lock: (mutex_unlock(&ele_mu_priv->mu_cmd_lock),
+ * will be unlocked if it is a response.
+ */
+
+ return err;
+}
+
+static int read_otp_uniq_id(struct ele_mu_priv *priv, u32 *value)
+{
+ unsigned int tag, command, size, ver, status;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+
+ if (tag == priv->rsp_tag &&
+ command == ELE_READ_FUSE_REQ &&
+ size == ELE_READ_FUSE_RSP_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ value[0] = priv->rx_msg.data[1];
+ value[1] = priv->rx_msg.data[2];
+ value[2] = priv->rx_msg.data[3];
+ value[3] = priv->rx_msg.data[4];
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int read_fuse_word(struct ele_mu_priv *priv, u32 *value)
+{
+ unsigned int tag, command, size, ver, status;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+
+ if (tag == priv->rsp_tag &&
+ command == ELE_READ_FUSE_REQ &&
+ size == ELE_READ_FUSE_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ value[0] = priv->rx_msg.data[1];
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+int read_common_fuse(uint16_t fuse_id, u32 *value)
+{
+ struct ele_mu_priv *priv = NULL;
+ int err;
+
+ err = get_ele_mu_priv(&priv);
+ if (err) {
+ pr_err("Error: iMX EdgeLock Enclave MU, used before probing.\n");
+ return err;
+ }
+ err = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_READ_FUSE_REQ, 8);
+ if (err) {
+ pr_err("Error: plat_fill_cmd_msg_hdr failed.\n");
+ return err;
+ }
+
+ priv->tx_msg.data[0] = fuse_id;
+ err = imx_ele_msg_send_rcv(priv);
+ if (err < 0)
+ return err;
+
+ switch (fuse_id) {
+ case OTP_UNIQ_ID:
+ err = read_otp_uniq_id(priv, value);
+ break;
+ default:
+ err = read_fuse_word(priv, value);
+ break;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(read_common_fuse);
+
+int ele_ping(void)
+{
+ struct ele_mu_priv *priv = NULL;
+ unsigned int tag, command, size, ver, status;
+ int err;
+
+ err = get_ele_mu_priv(&priv);
+ if (err) {
+ pr_err("Error: iMX EdgeLock Enclave MU, used before probing.\n");
+ return err;
+ }
+ err = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_PING_REQ, 4);
+ if (err) {
+ pr_err("Error: plat_fill_cmd_msg_hdr failed.\n");
+ return err;
+ }
+
+ err = imx_ele_msg_send_rcv(priv);
+ if (err < 0)
+ return err;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+
+ if (tag == priv->rsp_tag && command == ELE_PING_REQ &&
+ size == ELE_PING_REQ_MSG_SZ && ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND)
+ return 0;
+
+ return -EAGAIN;
+}
+EXPORT_SYMBOL_GPL(ele_ping);
+
+int ele_service_swap(phys_addr_t addr, u32 addr_size, u16 flag)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_SERVICE_SWAP_REQ, 24);
+ if (ret)
+ return ret;
+
+ priv->tx_msg.data[0] = flag;
+ priv->tx_msg.data[1] = addr_size;
+ priv->tx_msg.data[2] = ELE_NONE_VAL;
+ priv->tx_msg.data[3] = lower_32_bits(addr);
+ priv->tx_msg.data[4] = plat_add_msg_crc((uint32_t *)&priv->tx_msg, 24);
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_SERVICE_SWAP_REQ &&
+ size == ELE_SERVICE_SWAP_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ if (flag == ELE_IMEM_EXPORT)
+ return priv->rx_msg.data[1];
+ else
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_service_swap);
+
+int ele_get_info(phys_addr_t addr, u32 data_size)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_GET_INFO_REQ, 16);
+ if (ret)
+ return ret;
+
+ priv->tx_msg.data[0] = upper_32_bits(addr);
+ priv->tx_msg.data[1] = lower_32_bits(addr);
+ priv->tx_msg.data[2] = data_size;
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_GET_INFO_REQ &&
+ size == ELE_GET_INFO_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND)
+ return 0;
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_get_info);
+
+/*
+ * ele_get_trng_state() - prepare and send the command to read
+ * crypto lib and TRNG state
+ * TRNG state
+ * 0x1 TRNG is in program mode
+ * 0x2 TRNG is still generating entropy
+ * 0x3 TRNG entropy is valid and ready to be read
+ * 0x4 TRNG encounter an error while generating entropy
+ *
+ * CSAL state
+ * 0x0 Crypto Lib random context initialization is not done yet
+ * 0x1 Crypto Lib random context initialization is on-going
+ * 0x2 Crypto Lib random context initialization succeed
+ * 0x3 Crypto Lib random context initialization failed
+ *
+ * returns: csal and trng state.
+ *
+ */
+int ele_get_trng_state(void)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ /* access ele_mu_priv data structure pointer*/
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_GET_TRNG_STATE_REQ, 4);
+ if (ret)
+ return ret;
+
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_GET_TRNG_STATE_REQ &&
+ size == ELE_GET_TRNG_STATE_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ return (priv->rx_msg.data[1] & CSAL_TRNG_STATE_MASK);
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_get_trng_state);
+
+/*
+ * ele_start_rng() - prepare and send the command to start
+ * initialization of the ELE RNG context
+ *
+ * returns: 0 on success.
+ */
+int ele_start_rng(void)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ /* access ele_mu_priv data structure pointer*/
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_START_RNG_REQ, 4);
+ if (ret)
+ return ret;
+
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_START_RNG_REQ &&
+ size == ELE_START_RNG_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_start_rng);
diff --git a/drivers/firmware/imx/ele_mu.c b/drivers/firmware/imx/ele_mu.c
new file mode 100644
index 000000000000..41653429f7e2
--- /dev/null
+++ b/drivers/firmware/imx/ele_mu.c
@@ -0,0 +1,1285 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021-2023 NXP
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/completion.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/firmware/imx/ele_base_msg.h>
+#include <linux/firmware/imx/ele_mu_ioctl.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/sys_soc.h>
+#include <linux/workqueue.h>
+
+#include "ele_mu.h"
+
+#define ELE_PING_INTERVAL (3600 * HZ)
+#define ELE_TRNG_STATE_OK 0x203
+#define ELE_GET_TRNG_STATE_RETRY_COUNT 0x5
+
+#define ELE_GET_INFO_BUFF_SZ 0x100
+#define ELE_GET_INFO_READ_SZ 0xA0
+#define ELE_IMEM_SIZE 0x10000
+#define ELE_IMEM_STATE_OK 0xCA
+#define ELE_IMEM_STATE_BAD 0xFE
+#define ELE_IMEM_STATE_WORD 0x27
+#define ELE_IMEM_STATE_MASK 0x00ff0000
+
+#define RESERVED_DMA_POOL BIT(1)
+
+struct ele_mu_priv *ele_priv_export;
+
+struct imx_info {
+ bool socdev;
+ /* platform specific flag to enable/disable the ELE True RNG */
+ bool enable_ele_trng;
+ bool reserved_dma_ranges;
+};
+
+static const struct imx_info imx8ulp_info = {
+ .socdev = true,
+ .enable_ele_trng = false,
+ .reserved_dma_ranges = true,
+};
+
+static const struct imx_info imx93_info = {
+ .socdev = false,
+ .enable_ele_trng = true,
+ .reserved_dma_ranges = true,
+};
+
+static const struct of_device_id ele_mu_match[] = {
+ { .compatible = "fsl,imx-ele", .data = (void *)&imx8ulp_info},
+ { .compatible = "fsl,imx93-ele", .data = (void *)&imx93_info},
+ {},
+};
+
+int get_ele_mu_priv(struct ele_mu_priv **export)
+{
+ if (!ele_priv_export)
+ return -EPROBE_DEFER;
+
+ *export = ele_priv_export;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(get_ele_mu_priv);
+
+/*
+ * Callback called by mailbox FW when data are received
+ */
+static void ele_mu_rx_callback(struct mbox_client *c, void *msg)
+{
+ struct device *dev = c->dev;
+ struct ele_mu_priv *priv = dev_get_drvdata(dev);
+ struct ele_mu_device_ctx *dev_ctx;
+ bool is_response = false;
+ int msg_size;
+ struct mu_hdr header;
+
+ dev_dbg(dev, "Message received on mailbox\n");
+
+ /* The function can be called with NULL msg */
+ if (!msg) {
+ dev_err(dev, "Message is invalid\n");
+ return;
+ }
+
+ if (IS_ERR(msg)) {
+ dev_err(dev, "Error during reception of message: %ld\n",
+ PTR_ERR(msg));
+ return;
+ }
+
+ header.tag = ((u8 *)msg)[TAG_OFFSET];
+ header.command = ((u8 *)msg)[CMD_OFFSET];
+ header.size = ((u8 *)msg)[SZ_OFFSET];
+ header.ver = ((u8 *)msg)[VER_OFFSET];
+
+ dev_dbg(dev, "Selecting device\n");
+
+ /* Incoming command: wake up the receiver if any. */
+ if (header.tag == priv->cmd_tag) {
+ dev_dbg(dev, "Selecting cmd receiver\n");
+ dev_ctx = priv->cmd_receiver_dev;
+ } else if (header.tag == priv->rsp_tag) {
+ if (priv->waiting_rsp_dev) {
+ dev_dbg(dev, "Selecting rsp waiter\n");
+ dev_ctx = priv->waiting_rsp_dev;
+ is_response = true;
+ } else {
+ /* Reading the EdgeLock Enclave response
+ * to the command sent by other
+ * linux kernel services.
+ */
+ spin_lock(&priv->lock);
+ priv->rx_msg = *(struct ele_api_msg *)msg;
+ complete(&priv->done);
+ spin_unlock(&priv->lock);
+ //mutex_unlock(&priv->mu_cmd_lock);
+ return;
+ }
+ } else {
+ dev_err(dev, "Failed to select a device for message: %.8x\n",
+ *((u32 *) &header));
+ return;
+ }
+
+ if (!dev_ctx) {
+ dev_err(dev, "No device context selected for message: %.8x\n",
+ *((u32 *)&header));
+ return;
+ }
+ /* Init reception */
+ msg_size = header.size;
+ if (msg_size > MAX_RECV_SIZE) {
+ devctx_err(dev_ctx, "Message is too big (%d > %d)", msg_size,
+ MAX_RECV_SIZE);
+ return;
+ }
+
+ memcpy(dev_ctx->temp_resp, msg, msg_size * WORD_SZ);
+ dev_ctx->temp_resp_size = msg_size;
+
+ /* Allow user to read */
+ dev_ctx->pending_hdr = dev_ctx->temp_resp[0];
+ wake_up_interruptible(&dev_ctx->wq);
+
+ if (is_response) {
+ priv->waiting_rsp_dev = NULL;
+ //mutex_unlock(&priv->mu_cmd_lock);
+ }
+}
+
+static void ele_ping_handler(struct work_struct *work)
+{
+ int ret;
+
+ ret = ele_ping();
+ if (ret)
+ pr_err("ping ele failed, try again!\n");
+
+ /* reschedule the delay work */
+ schedule_delayed_work(to_delayed_work(work), ELE_PING_INTERVAL);
+}
+static DECLARE_DELAYED_WORK(ele_ping_work, ele_ping_handler);
+
+static int imx_soc_device_register(struct platform_device *pdev)
+{
+ struct soc_device_attribute *attr;
+ struct soc_device *dev;
+ struct gen_pool *sram_pool;
+ u32 *get_info_data;
+ phys_addr_t get_info_addr;
+ u32 soc_rev;
+ u32 v[4];
+ int err;
+
+ err = read_common_fuse(OTP_UNIQ_ID, v);
+ if (err)
+ return err;
+
+ sram_pool = of_gen_pool_get(pdev->dev.of_node, "sram-pool", 0);
+ if (!sram_pool) {
+ pr_err("Unable to get sram pool\n");
+ return -EINVAL;
+ }
+
+ get_info_data = (u32 *)gen_pool_alloc(sram_pool, 0x100);
+ if (!get_info_data) {
+ pr_err("Unable to alloc sram from sram pool\n");
+ return -ENOMEM;
+ }
+
+ get_info_addr = gen_pool_virt_to_phys(sram_pool, (ulong)get_info_data);
+
+ attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+ if (!attr)
+ return -ENOMEM;
+
+ err = ele_get_info(get_info_addr, 23 * WORD_SZ);
+ if (err) {
+ attr->revision = kasprintf(GFP_KERNEL, "A0");
+ } else {
+ soc_rev = (get_info_data[1] & 0xffff0000) >> 16;
+ if (soc_rev == 0xA100)
+ attr->revision = kasprintf(GFP_KERNEL, "A1");
+ else
+ attr->revision = kasprintf(GFP_KERNEL, "A0");
+ }
+
+ gen_pool_free(sram_pool, (unsigned long)get_info_data, 0x100);
+
+ err = of_property_read_string(of_root, "model", &attr->machine);
+ if (err) {
+ kfree(attr);
+ return -EINVAL;
+ }
+ attr->family = kasprintf(GFP_KERNEL, "Freescale i.MX");
+
+ attr->serial_number
+ = kasprintf(GFP_KERNEL, "%016llX", (u64)v[3] << 32 | v[0]);
+ attr->soc_id = kasprintf(GFP_KERNEL, "i.MX8ULP");
+
+ dev = soc_device_register(attr);
+ if (IS_ERR(dev)) {
+ kfree(attr->soc_id);
+ kfree(attr->serial_number);
+ kfree(attr->revision);
+ kfree(attr->family);
+ kfree(attr->machine);
+ kfree(attr);
+ return PTR_ERR(dev);
+ }
+
+ return 0;
+}
+
+static int ele_do_start_rng(void)
+{
+ int ret;
+ int count = ELE_GET_TRNG_STATE_RETRY_COUNT;
+
+ ret = ele_get_trng_state();
+ if (ret < 0) {
+ pr_err("Failed to get trng state\n");
+ return ret;
+ } else if (ret != ELE_TRNG_STATE_OK) {
+ /* call start rng */
+ ret = ele_start_rng();
+ if (ret) {
+ pr_err("Failed to start rng\n");
+ return ret;
+ }
+
+ /* poll get trng state API, ELE_GET_TRNG_STATE_RETRY_COUNT times
+ * or while trng state != 0x203
+ */
+ do {
+ msleep(10);
+ ret = ele_get_trng_state();
+ if (ret < 0) {
+ pr_err("Failed to get trng state\n");
+ return ret;
+ }
+ count--;
+ } while ((ret != ELE_TRNG_STATE_OK) && count);
+ if (ret != ELE_TRNG_STATE_OK)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * File operations for user-space
+ */
+
+/* Write a message to the MU. */
+static ssize_t ele_mu_fops_write(struct file *fp, const char __user *buf,
+ size_t size, loff_t *ppos)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ struct ele_mu_priv *ele_mu_priv = dev_ctx->priv;
+ u32 nb_words = 0;
+ struct mu_hdr header;
+ int err;
+
+ devctx_dbg(dev_ctx, "write from buf (%p)%zu, ppos=%lld\n", buf, size,
+ ((ppos) ? *ppos : 0));
+
+ if (down_interruptible(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ if (dev_ctx->status != MU_OPENED) {
+ err = -EINVAL;
+ goto exit;
+ }
+
+ if (size < ELE_MU_HDR_SZ) {
+ devctx_err(dev_ctx, "User buffer too small(%zu < %d)\n",
+ size, ELE_MU_HDR_SZ);
+ err = -ENOSPC;
+ goto exit;
+ }
+
+ if (size > MAX_MESSAGE_SIZE_BYTES) {
+ devctx_err(dev_ctx, "User buffer too big(%zu > %d)\n", size,
+ MAX_MESSAGE_SIZE_BYTES);
+ err = -ENOSPC;
+ goto exit;
+ }
+
+ /* Copy data to buffer */
+ err = (int)copy_from_user(dev_ctx->temp_cmd, buf, size);
+ if (err) {
+ err = -EFAULT;
+ devctx_err(dev_ctx, "Fail copy message from user\n");
+ goto exit;
+ }
+
+ print_hex_dump_debug("from user ", DUMP_PREFIX_OFFSET, 4, 4,
+ dev_ctx->temp_cmd, size, false);
+
+ header = *((struct mu_hdr *) (&dev_ctx->temp_cmd[0]));
+
+ /* Check the message is valid according to tags */
+ if (header.tag == ele_mu_priv->cmd_tag) {
+ /*
+ * unlocked in ele_mu_receive_work_handler when the
+ * response to this command is received.
+ */
+ mutex_lock(&ele_mu_priv->mu_cmd_lock);
+ ele_mu_priv->waiting_rsp_dev = dev_ctx;
+ } else if (header.tag == ele_mu_priv->rsp_tag) {
+ /* Check the device context can send the command */
+ if (dev_ctx != ele_mu_priv->cmd_receiver_dev) {
+ devctx_err(dev_ctx,
+ "Channel not configured to send resp to FW.");
+ err = -EPERM;
+ goto exit;
+ }
+ } else {
+ devctx_err(dev_ctx, "The message does not have a valid TAG\n");
+ err = -EINVAL;
+ goto exit;
+ }
+
+ /*
+ * Check that the size passed as argument matches the size
+ * carried in the message.
+ */
+ nb_words = header.size;
+ if (nb_words << 2 != size) {
+ devctx_err(dev_ctx, "User buffer too small\n");
+ goto exit;
+ }
+
+ mutex_lock(&ele_mu_priv->mu_lock);
+
+ /* Send message */
+ devctx_dbg(dev_ctx, "sending message\n");
+ err = mbox_send_message(ele_mu_priv->tx_chan, dev_ctx->temp_cmd);
+ if (err < 0) {
+ devctx_err(dev_ctx, "Failed to send message\n");
+ goto unlock;
+ }
+
+ err = nb_words * WORD_SZ;
+
+unlock:
+ mutex_unlock(&ele_mu_priv->mu_lock);
+
+exit:
+ up(&dev_ctx->fops_lock);
+ return err;
+}
+
+/*
+ * Read a message from the MU.
+ * Blocking until a message is available.
+ */
+static ssize_t ele_mu_fops_read(struct file *fp, char __user *buf,
+ size_t size, loff_t *ppos)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ struct ele_mu_priv *ele_mu_priv = dev_ctx->priv;
+ u32 data_size = 0, size_to_copy = 0;
+ struct ele_obuf_desc *b_desc;
+ int err;
+ struct mu_hdr header;
+
+ devctx_dbg(dev_ctx, "read to buf %p(%zu), ppos=%lld\n", buf, size,
+ ((ppos) ? *ppos : 0));
+
+ if (down_interruptible(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ if (dev_ctx->status != MU_OPENED) {
+ err = -EINVAL;
+ goto exit;
+ }
+
+ /* Wait until the complete message is received on the MU. */
+ err = wait_event_interruptible(dev_ctx->wq, dev_ctx->pending_hdr != 0);
+ if (err) {
+ devctx_err(dev_ctx, "Err[0x%x]:Interrupted by signal.\n", err);
+ goto exit;
+ }
+
+ devctx_dbg(dev_ctx, "%s %s\n", __func__,
+ "message received, start transmit to user");
+
+ /* Check that the size passed as argument is larger than
+ * the one carried in the message.
+ */
+ data_size = dev_ctx->temp_resp_size * WORD_SZ;
+ size_to_copy = data_size;
+ if (size_to_copy > size) {
+ devctx_dbg(dev_ctx, "User buffer too small (%zu < %d)\n",
+ size, size_to_copy);
+ size_to_copy = size;
+ }
+
+ /* We may need to copy the output data to user before
+ * delivering the completion message.
+ */
+ while (!list_empty(&dev_ctx->pending_out)) {
+ b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
+ struct ele_obuf_desc,
+ link);
+ if (b_desc->out_usr_ptr && b_desc->out_ptr) {
+ devctx_dbg(dev_ctx, "Copy output data to user\n");
+ err = (int)copy_to_user(b_desc->out_usr_ptr,
+ b_desc->out_ptr,
+ b_desc->out_size);
+ if (err) {
+ devctx_err(dev_ctx,
+ "Failure copying output data to user.");
+ err = -EFAULT;
+ goto exit;
+ }
+ }
+ __list_del_entry(&b_desc->link);
+ devm_kfree(dev_ctx->dev, b_desc);
+ }
+
+ header = *((struct mu_hdr *) (&dev_ctx->temp_resp[0]));
+
+ /* Copy data from the buffer */
+ print_hex_dump_debug("to user ", DUMP_PREFIX_OFFSET, 4, 4,
+ dev_ctx->temp_resp, size_to_copy, false);
+ err = (int)copy_to_user(buf, dev_ctx->temp_resp, size_to_copy);
+ if (err) {
+ devctx_err(dev_ctx, "Failed to copy to user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+ err = size_to_copy;
+
+ /* free memory allocated on the shared buffers. */
+ dev_ctx->secure_mem.pos = 0;
+ dev_ctx->non_secure_mem.pos = 0;
+
+ dev_ctx->pending_hdr = 0;
+
+exit:
+ if (header.tag == ele_mu_priv->rsp_tag)
+ mutex_unlock(&ele_mu_priv->mu_cmd_lock);
+ up(&dev_ctx->fops_lock);
+ return err;
+}
+
+/* Give access to EdgeLock Enclave, to the memory we want to share */
+static int ele_mu_setup_ele_mem_access(struct ele_mu_device_ctx *dev_ctx,
+ u64 addr, u32 len)
+{
+ /* Assuming EdgeLock Enclave has access to all the memory regions */
+ int ret = 0;
+
+ if (ret) {
+ devctx_err(dev_ctx, "Fail find memreg\n");
+ goto exit;
+ }
+
+ if (ret) {
+ devctx_err(dev_ctx, "Fail set permission for resource\n");
+ goto exit;
+ }
+
+exit:
+ return ret;
+}
+
+static int ele_mu_ioctl_get_mu_info(struct ele_mu_device_ctx *dev_ctx,
+ unsigned long arg)
+{
+ struct ele_mu_priv *priv = dev_get_drvdata(dev_ctx->dev);
+ struct ele_mu_ioctl_get_mu_info info;
+ int err = -EINVAL;
+
+ info.ele_mu_id = (u8)priv->ele_mu_id;
+ info.interrupt_idx = 0;
+ info.tz = 0;
+ info.did = (u8)priv->ele_mu_did;
+
+ devctx_dbg(dev_ctx,
+ "info [mu_idx: %d, irq_idx: %d, tz: 0x%x, did: 0x%x]\n",
+ info.ele_mu_id, info.interrupt_idx, info.tz, info.did);
+
+ err = (int)copy_to_user((u8 *)arg, &info,
+ sizeof(info));
+ if (err) {
+ devctx_err(dev_ctx, "Failed to copy mu info to user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+exit:
+ return err;
+}
+
+/*
+ * Copy a buffer of daa to/from the user and return the address to use in
+ * messages
+ */
+static int ele_mu_ioctl_setup_iobuf_handler(struct ele_mu_device_ctx *dev_ctx,
+ unsigned long arg)
+{
+ struct ele_obuf_desc *out_buf_desc;
+ struct ele_mu_ioctl_setup_iobuf io = {0};
+ struct ele_shared_mem *shared_mem;
+ int err = -EINVAL;
+ u32 pos;
+
+ err = (int)copy_from_user(&io,
+ (u8 *)arg,
+ sizeof(io));
+ if (err) {
+ devctx_err(dev_ctx, "Failed copy iobuf config from user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+ devctx_dbg(dev_ctx, "io [buf: %p(%d) flag: %x]\n",
+ io.user_buf, io.length, io.flags);
+
+ if (io.length == 0 || !io.user_buf) {
+ /*
+ * Accept NULL pointers since some buffers are optional
+ * in FW commands. In this case we should return 0 as
+ * pointer to be embedded into the message.
+ * Skip all data copy part of code below.
+ */
+ io.ele_addr = 0;
+ goto copy;
+ }
+
+ /* Select the shared memory to be used for this buffer. */
+ if (io.flags & ELE_MU_IO_FLAGS_USE_SEC_MEM) {
+ /* App requires to use secure memory for this buffer.*/
+ devctx_err(dev_ctx, "Failed allocate SEC MEM memory\n");
+ err = -EFAULT;
+ goto exit;
+ } else {
+ /* No specific requirement for this buffer. */
+ shared_mem = &dev_ctx->non_secure_mem;
+ }
+
+ /* Check there is enough space in the shared memory. */
+ if (io.length >= shared_mem->size - shared_mem->pos) {
+ devctx_err(dev_ctx, "Not enough space in shared memory\n");
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ /* Allocate space in shared memory. 8 bytes aligned. */
+ pos = shared_mem->pos;
+ shared_mem->pos += round_up(io.length, 8u);
+ io.ele_addr = (u64)shared_mem->dma_addr + pos;
+
+ if ((io.flags & ELE_MU_IO_FLAGS_USE_SEC_MEM) &&
+ !(io.flags & ELE_MU_IO_FLAGS_USE_SHORT_ADDR)) {
+ /*Add base address to get full address.*/
+ devctx_err(dev_ctx, "Failed allocate SEC MEM memory\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+ if (io.flags & ELE_MU_IO_FLAGS_IS_INPUT) {
+ /*
+ * buffer is input:
+ * copy data from user space to this allocated buffer.
+ */
+ err = (int)copy_from_user(shared_mem->ptr + pos, io.user_buf,
+ io.length);
+ if (err) {
+ devctx_err(dev_ctx,
+ "Failed copy data to shared memory\n");
+ err = -EFAULT;
+ goto exit;
+ }
+ /* flush this memory "shared_mem->ptr + pos"
+ * with size = io.length
+ */
+ } else {
+ if (io.flags & ELE_MU_IO_FLAGS_IS_IN_OUT) {
+ err = (int)copy_from_user(shared_mem->ptr + pos,
+ io.user_buf,
+ io.length);
+ if (err) {
+ devctx_err(dev_ctx,
+ "Failed copy data to shared-mem.\n");
+ err = -EFAULT;
+ goto exit;
+ }
+ }
+
+ /*
+ * buffer is output:
+ * add an entry in the "pending buffers" list so data
+ * can be copied to user space when receiving FW
+ * response.
+ */
+ out_buf_desc = devm_kmalloc(dev_ctx->dev,
+ sizeof(*out_buf_desc),
+ GFP_KERNEL);
+
+ if (!out_buf_desc) {
+ err = -ENOMEM;
+ devctx_err(dev_ctx,
+ "Failed allocating mem for pending buffer\n"
+ );
+ goto exit;
+ }
+
+ out_buf_desc->out_ptr = shared_mem->ptr + pos;
+ out_buf_desc->out_usr_ptr = io.user_buf;
+ out_buf_desc->out_size = io.length;
+ list_add_tail(&out_buf_desc->link, &dev_ctx->pending_out);
+ }
+
+copy:
+ /* Provide the EdgeLock Enclave address to user space only if success.*/
+ err = (int)copy_to_user((u8 *)arg, &io,
+ sizeof(io));
+ if (err) {
+ devctx_err(dev_ctx, "Failed to copy iobuff setup to user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+exit:
+ return err;
+}
+
+
+
+/* Open a char device. */
+static int ele_mu_fops_open(struct inode *nd, struct file *fp)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ int err;
+
+ /* Avoid race if opened at the same time */
+ if (down_trylock(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ /* Authorize only 1 instance. */
+ if (dev_ctx->status != MU_FREE) {
+ err = -EBUSY;
+ goto exit;
+ }
+
+ /*
+ * Allocate some memory for data exchanges with S40x.
+ * This will be used for data not requiring secure memory.
+ */
+ dev_ctx->non_secure_mem.ptr = dmam_alloc_coherent(dev_ctx->dev,
+ MAX_DATA_SIZE_PER_USER,
+ &dev_ctx->non_secure_mem.dma_addr,
+ GFP_KERNEL);
+ if (!dev_ctx->non_secure_mem.ptr) {
+ err = -ENOMEM;
+ devctx_err(dev_ctx, "Failed to map shared memory with S40x\n");
+ goto exit;
+ }
+
+ err = ele_mu_setup_ele_mem_access(dev_ctx,
+ dev_ctx->non_secure_mem.dma_addr,
+ MAX_DATA_SIZE_PER_USER);
+ if (err) {
+ err = -EPERM;
+ devctx_err(dev_ctx,
+ "Failed to share access to shared memory\n");
+ goto free_coherent;
+ }
+
+ dev_ctx->non_secure_mem.size = MAX_DATA_SIZE_PER_USER;
+ dev_ctx->non_secure_mem.pos = 0;
+ dev_ctx->status = MU_OPENED;
+
+ dev_ctx->pending_hdr = 0;
+
+ goto exit;
+
+free_coherent:
+ dmam_free_coherent(dev_ctx->priv->dev, MAX_DATA_SIZE_PER_USER,
+ dev_ctx->non_secure_mem.ptr,
+ dev_ctx->non_secure_mem.dma_addr);
+
+exit:
+ up(&dev_ctx->fops_lock);
+ return err;
+}
+
+/* Close a char device. */
+static int ele_mu_fops_close(struct inode *nd, struct file *fp)
+{
+ struct ele_mu_device_ctx *dev_ctx = container_of(fp->private_data,
+ struct ele_mu_device_ctx, miscdev);
+ struct ele_mu_priv *priv = dev_ctx->priv;
+ struct ele_obuf_desc *out_buf_desc;
+
+ /* Avoid race if closed at the same time */
+ if (down_trylock(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ /* The device context has not been opened */
+ if (dev_ctx->status != MU_OPENED)
+ goto exit;
+
+ /* check if this device was registered as command receiver. */
+ if (priv->cmd_receiver_dev == dev_ctx)
+ priv->cmd_receiver_dev = NULL;
+
+ /* check if this device was registered as waiting response. */
+ if (priv->waiting_rsp_dev == dev_ctx) {
+ priv->waiting_rsp_dev = NULL;
+ mutex_unlock(&priv->mu_cmd_lock);
+ }
+
+ /* Unmap secure memory shared buffer. */
+ if (dev_ctx->secure_mem.ptr)
+ devm_iounmap(dev_ctx->dev, dev_ctx->secure_mem.ptr);
+
+ dev_ctx->secure_mem.ptr = NULL;
+ dev_ctx->secure_mem.dma_addr = 0;
+ dev_ctx->secure_mem.size = 0;
+ dev_ctx->secure_mem.pos = 0;
+
+ /* Free non-secure shared buffer. */
+ dmam_free_coherent(dev_ctx->priv->dev, MAX_DATA_SIZE_PER_USER,
+ dev_ctx->non_secure_mem.ptr,
+ dev_ctx->non_secure_mem.dma_addr);
+
+ dev_ctx->non_secure_mem.ptr = NULL;
+ dev_ctx->non_secure_mem.dma_addr = 0;
+ dev_ctx->non_secure_mem.size = 0;
+ dev_ctx->non_secure_mem.pos = 0;
+
+ while (!list_empty(&dev_ctx->pending_out)) {
+ out_buf_desc = list_first_entry_or_null(&dev_ctx->pending_out,
+ struct ele_obuf_desc,
+ link);
+ __list_del_entry(&out_buf_desc->link);
+ devm_kfree(dev_ctx->dev, out_buf_desc);
+ }
+
+ dev_ctx->status = MU_FREE;
+
+exit:
+ up(&dev_ctx->fops_lock);
+ return 0;
+}
+
+/* IOCTL entry point of a char device */
+static long ele_mu_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ struct ele_mu_priv *ele_mu_priv = dev_ctx->priv;
+ int err = -EINVAL;
+
+ /* Prevent race during change of device context */
+ if (down_interruptible(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ switch (cmd) {
+ case ELE_MU_IOCTL_ENABLE_CMD_RCV:
+ if (!ele_mu_priv->cmd_receiver_dev) {
+ ele_mu_priv->cmd_receiver_dev = dev_ctx;
+ err = 0;
+ };
+ break;
+ case ELE_MU_IOCTL_GET_MU_INFO:
+ err = ele_mu_ioctl_get_mu_info(dev_ctx, arg);
+ break;
+ case ELE_MU_IOCTL_SHARED_BUF_CFG:
+ devctx_err(dev_ctx,
+ "ELE_MU_IOCTL_SHARED_BUF_CFG not supported [0x%x].\n",
+ err);
+ break;
+ case ELE_MU_IOCTL_SETUP_IOBUF:
+ err = ele_mu_ioctl_setup_iobuf_handler(dev_ctx, arg);
+ break;
+ case ELE_MU_IOCTL_SIGNED_MESSAGE:
+ devctx_err(dev_ctx,
+ "ELE_MU_IOCTL_SIGNED_MESSAGE not supported [0x%x].\n",
+ err);
+ break;
+ default:
+ err = -EINVAL;
+ devctx_dbg(dev_ctx, "IOCTL %.8x not supported\n", cmd);
+ }
+
+ up(&dev_ctx->fops_lock);
+ return (long)err;
+}
+
+/* Char driver setup */
+static const struct file_operations ele_mu_fops = {
+ .open = ele_mu_fops_open,
+ .owner = THIS_MODULE,
+ .release = ele_mu_fops_close,
+ .unlocked_ioctl = ele_mu_ioctl,
+ .read = ele_mu_fops_read,
+ .write = ele_mu_fops_write,
+};
+
+/* interface for managed res to free a mailbox channel */
+static void if_mbox_free_channel(void *mbox_chan)
+{
+ mbox_free_channel(mbox_chan);
+}
+
+/* interface for managed res to unregister a char device */
+static void if_misc_deregister(void *miscdevice)
+{
+ misc_deregister(miscdevice);
+}
+
+static int ele_mu_request_channel(struct device *dev,
+ struct mbox_chan **chan,
+ struct mbox_client *cl,
+ const char *name)
+{
+ struct mbox_chan *t_chan;
+ int ret = 0;
+
+ t_chan = mbox_request_channel_byname(cl, name);
+ if (IS_ERR(t_chan)) {
+ ret = PTR_ERR(t_chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to request chan %s ret %d\n", name,
+ ret);
+ goto exit;
+ }
+
+ ret = devm_add_action(dev, if_mbox_free_channel, t_chan);
+ if (ret) {
+ dev_err(dev, "failed to add devm removal of mbox %s\n", name);
+ goto exit;
+ }
+
+ *chan = t_chan;
+
+exit:
+ return ret;
+}
+
+static int ele_mu_probe(struct platform_device *pdev)
+{
+ struct ele_mu_device_ctx *dev_ctx;
+ struct device *dev = &pdev->dev;
+ struct ele_mu_priv *priv;
+ struct device_node *np;
+ const struct of_device_id *of_id = of_match_device(ele_mu_match, dev);
+ struct imx_info *info = (of_id != NULL) ? (struct imx_info *)of_id->data
+ : NULL;
+ int max_nb_users = 0;
+ char *devname;
+ int ret;
+ int i;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ dev_err(dev, "Fail allocate mem for private data\n");
+ goto exit;
+ }
+ priv->dev = dev;
+ dev_set_drvdata(dev, priv);
+
+ /*
+ * Get the address of MU to be used for communication with the SCU
+ */
+ np = pdev->dev.of_node;
+ if (!np) {
+ dev_err(dev, "Cannot find MU User entry in device tree\n");
+ ret = -EOPNOTSUPP;
+ goto exit;
+ }
+
+ /* Initialize the mutex. */
+ mutex_init(&priv->mu_cmd_lock);
+ mutex_init(&priv->mu_lock);
+
+ /* TBD */
+ priv->cmd_receiver_dev = NULL;
+ priv->waiting_rsp_dev = NULL;
+
+ ret = of_property_read_u32(np, "fsl,ele_mu_did", &priv->ele_mu_did);
+ if (ret) {
+ ret = -EINVAL;
+ dev_err(dev, "%s: Not able to read ele_mu_did", __func__);
+ goto exit;
+ }
+
+ ret = of_property_read_u32(np, "fsl,ele_mu_id", &priv->ele_mu_id);
+ if (ret) {
+ ret = -EINVAL;
+ dev_err(dev, "%s: Not able to read ele_mu_id", __func__);
+ goto exit;
+ }
+
+ ret = of_property_read_u32(np, "fsl,ele_mu_max_users", &max_nb_users);
+ if (ret) {
+ dev_warn(dev, "%s: Not able to read mu_max_user", __func__);
+ max_nb_users = S4_MUAP_DEFAULT_MAX_USERS;
+ }
+
+ ret = of_property_read_u8(np, "fsl,cmd_tag", &priv->cmd_tag);
+ if (ret) {
+ dev_warn(dev, "%s: Not able to read cmd_tag", __func__);
+ priv->cmd_tag = DEFAULT_MESSAGING_TAG_COMMAND;
+ }
+
+ ret = of_property_read_u8(np, "fsl,rsp_tag", &priv->rsp_tag);
+ if (ret) {
+ dev_warn(dev, "%s: Not able to read rsp_tag", __func__);
+ priv->rsp_tag = DEFAULT_MESSAGING_TAG_RESPONSE;
+ }
+
+ /* Mailbox client configuration */
+ priv->ele_mb_cl.dev = dev;
+ priv->ele_mb_cl.tx_block = false;
+ priv->ele_mb_cl.knows_txdone = true;
+ priv->ele_mb_cl.rx_callback = ele_mu_rx_callback;
+
+ ret = ele_mu_request_channel(dev, &priv->tx_chan,
+ &priv->ele_mb_cl, "tx");
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request tx channel\n");
+
+ goto exit;
+ }
+
+ ret = ele_mu_request_channel(dev, &priv->rx_chan,
+ &priv->ele_mb_cl, "rx");
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request rx channel\n");
+
+ goto exit;
+ }
+
+ priv->max_dev_ctx = max_nb_users;
+ priv->ctxs = devm_kzalloc(dev, sizeof(dev_ctx) * max_nb_users,
+ GFP_KERNEL);
+
+ /* Create users */
+ for (i = 0; i < max_nb_users; i++) {
+ dev_ctx = devm_kzalloc(dev, sizeof(*dev_ctx), GFP_KERNEL);
+ if (!dev_ctx) {
+ ret = -ENOMEM;
+ dev_err(dev,
+ "Fail to allocate memory for device context\n");
+ goto exit;
+ }
+
+ dev_ctx->dev = dev;
+ dev_ctx->status = MU_FREE;
+ dev_ctx->priv = priv;
+
+ priv->ctxs[i] = dev_ctx;
+
+ /* Default value invalid for an header. */
+ init_waitqueue_head(&dev_ctx->wq);
+
+ INIT_LIST_HEAD(&dev_ctx->pending_out);
+ sema_init(&dev_ctx->fops_lock, 1);
+
+ devname = devm_kasprintf(dev, GFP_KERNEL, "ele_mu%d_ch%d",
+ priv->ele_mu_id, i);
+ if (!devname) {
+ ret = -ENOMEM;
+ dev_err(dev,
+ "Fail to allocate memory for misc dev name\n");
+ goto exit;
+ }
+
+ dev_ctx->miscdev.name = devname;
+ dev_ctx->miscdev.minor = MISC_DYNAMIC_MINOR;
+ dev_ctx->miscdev.fops = &ele_mu_fops;
+ dev_ctx->miscdev.parent = dev;
+ ret = misc_register(&dev_ctx->miscdev);
+ if (ret) {
+ dev_err(dev, "failed to register misc device %d\n",
+ ret);
+ goto exit;
+ }
+
+ ret = devm_add_action(dev, if_misc_deregister,
+ &dev_ctx->miscdev);
+ if (ret) {
+ dev_err(dev,
+ "failed[%d] to add action to the misc-dev\n",
+ ret);
+ goto exit;
+ }
+ }
+
+ init_completion(&priv->done);
+ spin_lock_init(&priv->lock);
+
+ ele_priv_export = priv;
+
+ if (info && info->reserved_dma_ranges) {
+ ret = of_reserved_mem_device_init(dev);
+ if (ret) {
+ dev_err(dev,
+ "failed to init reserved memory region %d\n",
+ ret);
+ priv->flags &= (~RESERVED_DMA_POOL);
+ goto exit;
+ }
+ priv->flags |= RESERVED_DMA_POOL;
+ }
+
+ if (info && info->socdev) {
+ ret = imx_soc_device_register(pdev);
+ if (ret) {
+ dev_err(dev,
+ "failed[%d] to register SoC device\n", ret);
+ goto exit;
+ }
+
+ /* allocate buffer where ELE store encrypted IMEM */
+ priv->imem.buf = dmam_alloc_coherent(dev, ELE_IMEM_SIZE,
+ &priv->imem.phyaddr,
+ GFP_KERNEL);
+ if (!priv->imem.buf) {
+ dev_err(dev,
+ "Failed dmam-alloc to store encrypted IMEM.\n");
+ ret = -ENOMEM;
+ goto exit;
+ }
+ }
+
+ /* start ele rng */
+ ret = ele_do_start_rng();
+ if (ret)
+ dev_err(dev, "Failed to start ele rng\n");
+
+ if (!ret && info && info->enable_ele_trng) {
+ ret = ele_trng_init(dev);
+ if (ret)
+ dev_err(dev, "Failed to init ele-trng\n");
+ }
+
+ /*
+ * A ELE ping request must be send at least once every day(24 hours),
+ * so setup a delay work with 1 hour interval
+ * to ping ELE periodically.
+ */
+ schedule_delayed_work(&ele_ping_work, ELE_PING_INTERVAL);
+
+ dev_set_drvdata(dev, priv);
+ return devm_of_platform_populate(dev);
+
+exit:
+ /* if execution control reaches here, ele-mu probe fail.
+ * hence doing the cleanup
+ */
+ if (priv->flags & RESERVED_DMA_POOL) {
+ of_reserved_mem_device_release(dev);
+ priv->flags &= (~RESERVED_DMA_POOL);
+ }
+ return ret;
+}
+
+static int ele_mu_remove(struct platform_device *pdev)
+{
+ struct ele_mu_priv *priv;
+
+ cancel_delayed_work_sync(&ele_ping_work);
+ priv = dev_get_drvdata(&pdev->dev);
+ mbox_free_channel(priv->tx_chan);
+ mbox_free_channel(priv->rx_chan);
+
+ /* free the buffer in ele-mu remove, previously allocated
+ * in ele-mu probe to store encrypted IMEM
+ */
+ if (priv->imem.buf) {
+ dmam_free_coherent(&pdev->dev,
+ ELE_IMEM_SIZE,
+ priv->imem.buf,
+ priv->imem.phyaddr);
+ priv->imem.buf = NULL;
+ }
+
+ if (priv->flags & RESERVED_DMA_POOL) {
+ of_reserved_mem_device_release(&pdev->dev);
+ priv->flags &= (~RESERVED_DMA_POOL);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ele_mu_suspend(struct device *dev)
+{
+ struct ele_mu_priv *priv = dev_get_drvdata(dev);
+ const struct of_device_id *of_id = of_match_device(ele_mu_match, dev);
+ struct imx_info *info = (of_id != NULL) ? (struct imx_info *)of_id->data
+ : NULL;
+
+ if (info && info->socdev) {
+ int ret;
+
+ /* EXPORT command will save encrypted IMEM to given address,
+ * so later in resume, IMEM can be restored from the given
+ * address.
+ *
+ * Size must be at least 64 kB.
+ */
+ ret = ele_service_swap(priv->imem.phyaddr,
+ ELE_IMEM_SIZE,
+ ELE_IMEM_EXPORT);
+ if (ret < 0)
+ dev_err(dev, "Failed to export IMEM\n");
+ else {
+ priv->imem.size = ret;
+ dev_info(dev,
+ "Exported %d bytes of encrypted IMEM\n",
+ ret);
+ }
+ }
+
+ return 0;
+}
+
+static int ele_mu_resume(struct device *dev)
+{
+ struct ele_mu_priv *priv = dev_get_drvdata(dev);
+ int i;
+ const struct of_device_id *of_id = of_match_device(ele_mu_match, dev);
+ struct imx_info *info = (of_id != NULL) ? (struct imx_info *)of_id->data
+ : NULL;
+
+ for (i = 0; i < priv->max_dev_ctx; i++)
+ wake_up_interruptible(&priv->ctxs[i]->wq);
+
+ if (info && info->socdev) {
+ struct gen_pool *sram_pool;
+ u32 *get_info_buf;
+ phys_addr_t get_info_phyaddr;
+ u32 imem_state;
+ int ret;
+
+ ret = ele_do_start_rng();
+ if (ret)
+ return ret;
+
+ /* allocate buffer to get info from ELE */
+ sram_pool = of_gen_pool_get(dev->of_node, "sram-pool", 0);
+ if (!sram_pool) {
+ dev_err(dev, "Unable to get sram pool\n");
+ return -EINVAL;
+ }
+
+ get_info_buf = (u32 *)gen_pool_alloc(sram_pool,
+ ELE_GET_INFO_BUFF_SZ);
+ if (!get_info_buf) {
+ dev_err(dev, "Unable to alloc sram from sram pool\n");
+ return -ENOMEM;
+ }
+ get_info_phyaddr = gen_pool_virt_to_phys(sram_pool,
+ (ulong)get_info_buf);
+
+ /* get info from ELE */
+ ret = ele_get_info(get_info_phyaddr, ELE_GET_INFO_READ_SZ);
+ if (ret) {
+ dev_err(dev, "Failed to get info from ELE.\n");
+ goto exit;
+ }
+
+ /* Get IMEM state, if 0xFE then import IMEM */
+ imem_state = (get_info_buf[ELE_IMEM_STATE_WORD]
+ & ELE_IMEM_STATE_MASK) >> 16;
+ if (imem_state == ELE_IMEM_STATE_BAD) {
+ /* IMPORT command will restore IMEM from the given
+ * address, here size is the actual size returned by ELE
+ * during the export operation
+ */
+ ret = ele_service_swap(priv->imem.phyaddr,
+ priv->imem.size,
+ ELE_IMEM_IMPORT);
+ if (ret) {
+ dev_err(dev, "Failed to import IMEM\n");
+ goto exit;
+ }
+ } else
+ goto exit;
+
+ /* After importing IMEM, check if IMEM state is equal to 0xCA
+ * to ensure IMEM is fully loaded and
+ * ELE functionality can be used.
+ */
+ ret = ele_get_info(get_info_phyaddr, ELE_GET_INFO_READ_SZ);
+ if (ret) {
+ dev_err(dev, "Failed to get info from ELE.\n");
+ goto exit;
+ }
+
+ imem_state = (get_info_buf[ELE_IMEM_STATE_WORD]
+ & ELE_IMEM_STATE_MASK) >> 16;
+ if (imem_state == ELE_IMEM_STATE_OK)
+ dev_info(dev, "Successfully restored IMEM\n");
+ else
+ dev_err(dev, "Failed to restore IMEM\n");
+
+exit:
+ gen_pool_free(sram_pool, (ulong)get_info_buf, ELE_GET_INFO_BUFF_SZ);
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops ele_mu_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(ele_mu_suspend, ele_mu_resume)
+};
+
+static struct platform_driver ele_mu_driver = {
+ .driver = {
+ .name = "fsl-ele-mu",
+ .of_match_table = ele_mu_match,
+ .pm = &ele_mu_pm,
+ },
+ .probe = ele_mu_probe,
+ .remove = ele_mu_remove,
+};
+MODULE_DEVICE_TABLE(of, ele_mu_match);
+
+module_platform_driver(ele_mu_driver);
+
+MODULE_AUTHOR("Pankaj Gupta <pankaj.gupta@....com>");
+MODULE_DESCRIPTION("iMX Secure Enclave MU Driver.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/imx/ele_mu.h b/drivers/firmware/imx/ele_mu.h
new file mode 100644
index 000000000000..371a3c635f50
--- /dev/null
+++ b/drivers/firmware/imx/ele_mu.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021-2022 NXP
+ */
+
+#ifndef ELE_MU_H
+#define ELE_MU_H
+
+#include <linux/miscdevice.h>
+#include <linux/semaphore.h>
+#include <linux/mailbox_client.h>
+
+/* macro to log operation of a misc device */
+#define miscdev_dbg(p_miscdev, fmt, va_args...) \
+ ({ \
+ struct miscdevice *_p_miscdev = p_miscdev; \
+ dev_dbg((_p_miscdev)->parent, "%s: " fmt, (_p_miscdev)->name, \
+ ##va_args); \
+ })
+
+#define miscdev_info(p_miscdev, fmt, va_args...) \
+ ({ \
+ struct miscdevice *_p_miscdev = p_miscdev; \
+ dev_info((_p_miscdev)->parent, "%s: " fmt, (_p_miscdev)->name, \
+ ##va_args); \
+ })
+
+#define miscdev_err(p_miscdev, fmt, va_args...) \
+ ({ \
+ struct miscdevice *_p_miscdev = p_miscdev; \
+ dev_err((_p_miscdev)->parent, "%s: " fmt, (_p_miscdev)->name, \
+ ##va_args); \
+ })
+/* macro to log operation of a device context */
+#define devctx_dbg(p_devctx, fmt, va_args...) \
+ miscdev_dbg(&((p_devctx)->miscdev), fmt, ##va_args)
+#define devctx_info(p_devctx, fmt, va_args...) \
+ miscdev_info(&((p_devctx)->miscdev), fmt, ##va_args)
+#define devctx_err(p_devctx, fmt, va_args...) \
+ miscdev_err((&(p_devctx)->miscdev), fmt, ##va_args)
+
+#define MSG_TAG(x) (((x) & 0xff000000) >> 24)
+#define MSG_COMMAND(x) (((x) & 0x00ff0000) >> 16)
+#define MSG_SIZE(x) (((x) & 0x0000ff00) >> 8)
+#define MSG_VER(x) ((x) & 0x000000ff)
+#define RES_STATUS(x) ((x) & 0x000000ff)
+#define MAX_DATA_SIZE_PER_USER (65 * 1024)
+#define S4_DEFAULT_MUAP_INDEX (2)
+#define S4_MUAP_DEFAULT_MAX_USERS (4)
+
+#define DEFAULT_MESSAGING_TAG_COMMAND (0x17u)
+#define DEFAULT_MESSAGING_TAG_RESPONSE (0xe1u)
+
+//#define ELE_MU_IO_FLAGS_IS_INPUT (0x01u)
+//#define ELE_MU_IO_FLAGS_IS_OUTPUT (0x02u)
+//#define ELE_MU_IO_FLAGS_IS_IN_OUT (0x08u)
+
+#define ELE_MU_IO_FLAGS_USE_SEC_MEM (0x02u)
+#define ELE_MU_IO_FLAGS_USE_SHORT_ADDR (0x04u)
+
+struct ele_imem_buf {
+ u8 *buf;
+ phys_addr_t phyaddr;
+ u32 size;
+};
+
+struct ele_obuf_desc {
+ u8 *out_ptr;
+ u8 *out_usr_ptr;
+ u32 out_size;
+ struct list_head link;
+};
+
+/* Status of a char device */
+enum mu_device_status_t {
+ MU_FREE,
+ MU_OPENED
+};
+
+struct ele_shared_mem {
+ dma_addr_t dma_addr;
+ u32 size;
+ u32 pos;
+ u8 *ptr;
+};
+
+/* Private struct for each char device instance. */
+struct ele_mu_device_ctx {
+ struct device *dev;
+ struct ele_mu_priv *priv;
+ struct miscdevice miscdev;
+
+ enum mu_device_status_t status;
+ wait_queue_head_t wq;
+ struct semaphore fops_lock;
+
+ u32 pending_hdr;
+ struct list_head pending_out;
+
+ struct ele_shared_mem secure_mem;
+ struct ele_shared_mem non_secure_mem;
+
+ u32 temp_cmd[MAX_MESSAGE_SIZE];
+ u32 temp_resp[MAX_RECV_SIZE];
+ u32 temp_resp_size;
+ struct notifier_block ele_notify;
+};
+
+/* Header of the messages exchange with the EdgeLock Enclave */
+struct mu_hdr {
+ u8 ver;
+ u8 size;
+ u8 command;
+ u8 tag;
+} __packed;
+
+#define ELE_MU_HDR_SZ 4
+#define TAG_OFFSET (ELE_MU_HDR_SZ - 1)
+#define CMD_OFFSET (ELE_MU_HDR_SZ - 2)
+#define SZ_OFFSET (ELE_MU_HDR_SZ - 3)
+#define VER_OFFSET (ELE_MU_HDR_SZ - 4)
+
+struct ele_api_msg {
+ u32 header; /* u8 Tag; u8 Command; u8 Size; u8 Ver; */
+ u32 data[ELE_MSG_DATA_NUM];
+};
+
+struct ele_mu_priv {
+ struct ele_mu_device_ctx *cmd_receiver_dev;
+ struct ele_mu_device_ctx *waiting_rsp_dev;
+ /*
+ * prevent parallel access to the MU registers
+ * e.g. a user trying to send a command while the other one is
+ * sending a response.
+ */
+ struct mutex mu_lock;
+ /*
+ * prevent a command to be sent on the MU while another one is still
+ * processing. (response to a command is allowed)
+ */
+ struct mutex mu_cmd_lock;
+ struct device *dev;
+ u32 ele_mu_did;
+ u32 ele_mu_id;
+ u8 cmd_tag;
+ u8 rsp_tag;
+
+ struct mbox_client ele_mb_cl;
+ struct mbox_chan *tx_chan, *rx_chan;
+ struct ele_api_msg tx_msg, rx_msg;
+ struct completion done;
+ spinlock_t lock;
+ /* Flag to retain the state of initialization done at
+ * the time of ele-mu probe.
+ */
+ int flags;
+ int max_dev_ctx;
+ struct ele_mu_device_ctx **ctxs;
+ struct ele_imem_buf imem;
+};
+
+int get_ele_mu_priv(struct ele_mu_priv **export);
+
+int imx_ele_msg_send_rcv(struct ele_mu_priv *priv);
+#ifdef CONFIG_IMX_ELE_TRNG
+int ele_trng_init(struct device *dev);
+#else
+static inline int ele_trng_init(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/include/linux/firmware/imx/ele_base_msg.h b/include/linux/firmware/imx/ele_base_msg.h
new file mode 100644
index 000000000000..ec9b9df49889
--- /dev/null
+++ b/include/linux/firmware/imx/ele_base_msg.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ *
+ * Header file for the ELE Base API(s).
+ */
+
+#ifndef ELE_BASE_MSG_H
+#define ELE_BASE_MSG_H
+
+#include <linux/types.h>
+
+#define WORD_SZ 4
+#define MAX_RECV_SIZE 31
+#define MAX_RECV_SIZE_BYTES (MAX_RECV_SIZE * WORD_SZ)
+#define MAX_MESSAGE_SIZE 31
+#define MAX_MESSAGE_SIZE_BYTES (MAX_MESSAGE_SIZE * WORD_SZ)
+
+#define MESSAGING_VERSION_7 0x7
+#define ELE_NONE_VAL 0x0
+
+#define ELE_PING_REQ 0x1
+#define ELE_PING_REQ_MSG_SZ 0x02
+
+#define ELE_OEM_CNTN_AUTH_REQ 0x87
+#define ELE_VERIFY_IMAGE_REQ 0x88
+#define ELE_RELEASE_CONTAINER_REQ 0x89
+
+#define ELE_READ_FUSE_REQ 0x97
+#define ELE_READ_FUSE_RSP_MSG_SZ 0x07
+#define ELE_READ_FUSE_REQ_MSG_SZ 0x03
+
+#define OTP_UNIQ_ID 0x01
+#define OTFAD_CONFIG 0x2
+
+#define ELE_GET_INFO_REQ 0xDA
+#define ELE_GET_INFO_REQ_MSG_SZ 0x02
+
+#define ELE_SERVICE_SWAP_REQ 0xDF
+#define ELE_SERVICE_SWAP_REQ_MSG_SZ 0x03
+
+#define ELE_START_RNG_REQ 0xA3
+#define ELE_START_RNG_REQ_MSG_SZ 0x02
+
+#define ELE_GET_TRNG_STATE_REQ 0xA4
+#define ELE_GET_TRNG_STATE_REQ_MSG_SZ 0x03
+
+#define ELE_GET_RANDOM_REQ 0xCD
+#define CSAL_TRNG_STATE_MASK 0x0000ffff
+
+#define ELE_BASE_API_VERSION 0x6
+#define ELE_SUCCESS_IND 0xD6
+#define ELE_FAILURE_IND 0x29
+
+#define ELE_MSG_DATA_NUM 10
+
+#define ELE_IMEM_EXPORT 0x1
+#define ELE_IMEM_IMPORT 0x2
+
+int read_common_fuse(uint16_t fuse_index, u32 *value);
+int ele_ping(void);
+int ele_get_info(phys_addr_t addr, u32 data_size);
+int ele_service_swap(phys_addr_t addr, u32 addr_size, u16 flag);
+int ele_start_rng(void);
+int ele_get_trng_state(void);
+
+#endif
diff --git a/include/linux/firmware/imx/ele_mu_ioctl.h b/include/linux/firmware/imx/ele_mu_ioctl.h
new file mode 100644
index 000000000000..3ad93ded23ed
--- /dev/null
+++ b/include/linux/firmware/imx/ele_mu_ioctl.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause*/
+/*
+ * Copyright 2019-2022 NXP
+ */
+
+#ifndef ELE_MU_IOCTL_H
+#define ELE_MU_IOCTL_H
+
+/* IOCTL definitions. */
+
+struct ele_mu_ioctl_setup_iobuf {
+ u8 *user_buf;
+ u32 length;
+ u32 flags;
+ u64 ele_addr;
+};
+
+struct ele_mu_ioctl_shared_mem_cfg {
+ u32 base_offset;
+ u32 size;
+};
+
+struct ele_mu_ioctl_get_mu_info {
+ u8 ele_mu_id;
+ u8 interrupt_idx;
+ u8 tz;
+ u8 did;
+};
+
+struct ele_mu_ioctl_signed_message {
+ u8 *message;
+ u32 msg_size;
+ u32 error_code;
+};
+
+#define ELE_MU_IO_FLAGS_IS_OUTPUT (0x00u)
+#define ELE_MU_IO_FLAGS_IS_INPUT (0x01u)
+#define ELE_MU_IO_FLAGS_USE_SEC_MEM (0x02u)
+#define ELE_MU_IO_FLAGS_USE_SHORT_ADDR (0x04u)
+#define ELE_MU_IO_FLAGS_IS_IN_OUT (0x08u)
+
+#define ELE_MU_IOCTL 0x0A /* like MISC_MAJOR. */
+#define ELE_MU_IOCTL_ENABLE_CMD_RCV _IO(ELE_MU_IOCTL, 0x01)
+#define ELE_MU_IOCTL_SHARED_BUF_CFG _IOW(ELE_MU_IOCTL, 0x02, \
+ struct ele_mu_ioctl_shared_mem_cfg)
+#define ELE_MU_IOCTL_SETUP_IOBUF _IOWR(ELE_MU_IOCTL, 0x03, \
+ struct ele_mu_ioctl_setup_iobuf)
+#define ELE_MU_IOCTL_GET_MU_INFO _IOR(ELE_MU_IOCTL, 0x04, \
+ struct ele_mu_ioctl_get_mu_info)
+#define ELE_MU_IOCTL_SIGNED_MESSAGE _IOWR(ELE_MU_IOCTL, 0x05, \
+ struct ele_mu_ioctl_signed_message)
+#endif
--
2.34.1
Powered by blists - more mailing lists