[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b84537c0-cb58-621a-2b6d-3bbaac5091de@linaro.org>
Date: Wed, 19 Apr 2023 15:05:17 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Ludwig Kormann <ludwig.kormann@...circuit.de>, samuel@...lland.org,
jernej.skrabec@...il.com, wens@...e.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, andre.przywara@....com
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/1] arm: dts: sunxi: Add ICnova A20 ADB4006 board
support
On 19/04/2023 14:12, Ludwig Kormann wrote:
> Add board support for ICnova A20 SomPi compute module on
> ICnova ADB4006 development board.
>
> Specification:
> SoM
> - Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz
> - 512MB DDR3 RAM
> - Fast Ethernet (Phy: Realtek RTL8201CP)
> ADB4006
> - I2C
> - 2x USB 2.0
> - 1x Fast Ethernet port
> - 1x SATA
> - 2x buttons (PWRON, Boot)
> - 2x LEDS
> - serial console
> - HDMI
> - µSD-Card slot
> - Audio Line-In / Line-Out
> - GPIO pinheaders
>
> https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006
> https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
>
> ---
>
> changes in v2:
> - use short licensing header
> - remove deprecated elements from led nodes
> - disable csi power supply
> - add missing pins in usbphy node
> - split dts into SoM dtsi and carrier board dts
>
> v1 of this patch was sent to the uboot mailing list [1].
>
> [1] https://lists.denx.de/pipermail/u-boot/2023-April/514605.html
>
> Signed-off-by: Ludwig Kormann <ludwig.kormann@...circuit.de>
> ---
> .../devicetree/bindings/arm/sunxi.yaml | 6 +
Bindings are always separate patches. checkpatch did not complain?
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/sun7i-a20-icnova-a20-adb4006.dts | 137 ++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi | 63 ++++++++
> 4 files changed, 207 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
> index 013821f4a7b8..12f0c236f17b 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> @@ -305,6 +305,12 @@ properties:
> - const: allwinner,i12-tvbox
> - const: allwinner,sun7i-a20
>
> + - description: ICNova A20 ADB4006
> + items:
> + - const: incircuit,icnova-a20-adb4006
> + - const: incircuit,icnova-a20
> + - const: allwinner,sun7i-a20
> +
> - description: ICNova A20 SWAC
> items:
> - const: incircuit,icnova-a20-swac
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 3cc32722c394..b6b408417261 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1321,6 +1321,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-hummingbird.dtb \
> sun7i-a20-itead-ibox.dtb \
> sun7i-a20-i12-tvbox.dtb \
> + sun7i-a20-icnova-a20-adb4006.dtb \
> sun7i-a20-icnova-swac.dtb \
> sun7i-a20-lamobo-r1.dtb \
> sun7i-a20-linutronix-testbox-v2.dtb \
> diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
> new file mode 100644
> index 000000000000..c1606c085e4e
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
Unusual license. Are you sure you are ok with GPLv5.0?
Also, at the end of your files - drop stray blank lines.
Best regards,
Krzysztof
Powered by blists - more mailing lists