linux-kernel - Re: [RFC PATCH 4/5] arm64: dts: ti: Enable multiple MCAN for AM62x in MCU MCAN overlay

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <43daed81-fe38-60c6-bdd6-8ab15869c511@ti.com>
Date:   Wed, 19 Apr 2023 10:54:53 -0500
From:   "Mendez, Judith" <jm@...com>
To:     Nishanth Menon <nm@...com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
CC:     Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Andrew Davis <afd@...com>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        <linux-can@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <netdev@...r.kernel.org>,
        Schuyler Patton <spatton@...com>
Subject: Re: [RFC PATCH 4/5] arm64: dts: ti: Enable multiple MCAN for AM62x in
 MCU MCAN overlay

Hello, all

On 4/14/2023 5:11 PM, Nishanth Menon wrote:
> On 22:44-20230414, Krzysztof Kozlowski wrote:
>> On 14/04/2023 20:29, Nishanth Menon wrote:
>>>>> +
>>>>> +&cbass_mcu {
>>>>> +	mcu_mcan1: can@...0000 {
>>>>> +		compatible = "bosch,m_can";
>>>>> +		reg = <0x00 0x4e00000 0x00 0x8000>,
>>>>> +			  <0x00 0x4e08000 0x00 0x200>;
>>>>> +		reg-names = "message_ram", "m_can";
>>>>> +		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
>>>>> +		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
>>>>> +		clock-names = "hclk", "cclk";
>>>>> +		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
>>>>> +		pinctrl-names = "default";
>>>>> +		pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>> +		phys = <&transceiver2>;
>>>>> +		status = "okay";
>>>>
>>>> okay is by default. Why do you need it?
>>>
>>> mcan is not functional without pinmux, so it has been disabled by
>>> default in SoC. this overlay is supposed to enable it. But this is done
>>> entirely wrongly.
>>
>> Ah, so this is override of existing node? Why not overriding by
>> label/phandle?
> 
> Yep, that is how it should be done (as every other node is done for
> mcan):
> a) SoC.dtsi -> introduce mcu_mcan1, disabled since no transciever or
> pinmux, set status = "disabled";
> b) overlay -> use the label and provide the missing properties, set
> status = "okay";
> 
> The series definitely needs a respin.
> 

Thanks for your feedback, I will definitely fix and send out a v2 with 
this update.

Thanks,
Judith