| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230420161052.270366-3-herve.codina@bootlin.com>
Date: Thu, 20 Apr 2023 18:10:51 +0200
From: Herve Codina <herve.codina@...tlin.com>
To: Herve Codina <herve.codina@...tlin.com>,
Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Christophe Leroy <christophe.leroy@...roup.eu>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: [PATCH v2 2/3] iio: potentiometer: Add support for the Renesas X9250 potentiometers
The Renesas X9250 integrates four digitally controlled potentiometers.
On each potentiometer, the X9250T has a 100 kOhms total resistance and
the X9250U has a 50 kOhms total resistance.
Signed-off-by: Herve Codina <herve.codina@...tlin.com>
---
drivers/iio/potentiometer/Kconfig | 10 ++
drivers/iio/potentiometer/Makefile | 1 +
drivers/iio/potentiometer/x9250.c | 234 +++++++++++++++++++++++++++++
3 files changed, 245 insertions(+)
create mode 100644 drivers/iio/potentiometer/x9250.c
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 01dd3f858d99..e6a9a3c67845 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -136,4 +136,14 @@ config TPL0102
To compile this driver as a module, choose M here: the
module will be called tpl0102.
+config X9250
+ tristate "Renesas X9250 quad controlled potentiometers"
+ depends on SPI
+ help
+ Enable support for the Renesas X9250 quad controlled
+ potentiometers.
+
+ To compile this driver as a module, choose M here: the module
+ will be called x9250.
+
endmenu
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 5ebb8e3bbd76..d11fb739176c 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_MCP4131) += mcp4131.o
obj-$(CONFIG_MCP4531) += mcp4531.o
obj-$(CONFIG_MCP41010) += mcp41010.o
obj-$(CONFIG_TPL0102) += tpl0102.o
+obj-$(CONFIG_X9250) += x9250.o
diff --git a/drivers/iio/potentiometer/x9250.c b/drivers/iio/potentiometer/x9250.c
new file mode 100644
index 000000000000..c6bc959205a3
--- /dev/null
+++ b/drivers/iio/potentiometer/x9250.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *
+ * x9250.c -- Renesas X9250 potentiometers IIO driver
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@...tlin.com>
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+struct x9250_cfg {
+ int kohms;
+};
+
+struct x9250 {
+ struct spi_device *spi;
+ const struct x9250_cfg *cfg;
+ struct mutex lock; /* Protect tx and rx buffers */
+ /* Cannot use stack area for SPI (dma-safe memory) */
+ u8 spi_tx_buf[3] __aligned(IIO_DMA_MINALIGN);
+ u8 spi_rx_buf[3] __aligned(IIO_DMA_MINALIGN);
+};
+
+#define X9250_ID 0x50
+#define X9250_CMD_RD_WCR(_p) (0x90 | (_p))
+#define X9250_CMD_WR_WCR(_p) (0xa0 | (_p))
+
+static int x9250_write8(struct x9250 *x9250, u8 cmd, u8 val)
+{
+ struct spi_transfer xfer = {
+ .tx_buf = &x9250->spi_tx_buf,
+ .len = 3,
+ };
+ int ret;
+
+ BUILD_BUG_ON(sizeof(x9250->spi_tx_buf) < 3);
+
+ mutex_lock(&x9250->lock);
+
+ x9250->spi_tx_buf[0] = X9250_ID;
+ x9250->spi_tx_buf[1] = cmd;
+ x9250->spi_tx_buf[2] = val;
+
+ ret = spi_sync_transfer(x9250->spi, &xfer, 1);
+
+ mutex_unlock(&x9250->lock);
+
+ return ret;
+}
+
+static int x9250_read8(struct x9250 *x9250, u8 cmd, u8 *val)
+{
+ struct spi_transfer xfer = {
+ .tx_buf = &x9250->spi_tx_buf,
+ .rx_buf = &x9250->spi_rx_buf,
+ .len = 3,
+ };
+ int ret;
+
+ BUILD_BUG_ON(sizeof(x9250->spi_tx_buf) < 3);
+ BUILD_BUG_ON(sizeof(x9250->spi_rx_buf) < 3);
+
+ mutex_lock(&x9250->lock);
+
+ x9250->spi_tx_buf[0] = X9250_ID;
+ x9250->spi_tx_buf[1] = cmd;
+
+ ret = spi_sync_transfer(x9250->spi, &xfer, 1);
+ if (ret)
+ goto end;
+
+ *val = x9250->spi_rx_buf[2];
+ ret = 0;
+end:
+ mutex_unlock(&x9250->lock);
+ return ret;
+}
+
+#define X9250_CHANNEL(ch) { \
+ .type = IIO_RESISTANCE, \
+ .indexed = 1, \
+ .output = 1, \
+ .channel = (ch), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_RAW), \
+}
+
+static const struct iio_chan_spec x9250_channels[] = {
+ X9250_CHANNEL(0),
+ X9250_CHANNEL(1),
+ X9250_CHANNEL(2),
+ X9250_CHANNEL(3),
+};
+
+static int x9250_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct x9250 *x9250 = iio_priv(indio_dev);
+ int ch = chan->channel;
+ int ret;
+ u8 v;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = x9250_read8(x9250, X9250_CMD_RD_WCR(ch), &v);
+ if (ret)
+ return ret;
+ *val = v;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = 1000 * x9250->cfg->kohms;
+ *val2 = U8_MAX;
+ return IIO_VAL_FRACTIONAL;
+ }
+
+ return -EINVAL;
+}
+
+static int x9250_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length, long mask)
+{
+ static const int range[] = {0, 1, 255}; /* min, step, max */
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ *length = ARRAY_SIZE(range);
+ *vals = range;
+ *type = IIO_VAL_INT;
+ return IIO_AVAIL_RANGE;
+ }
+
+ return -EINVAL;
+}
+
+static int x9250_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct x9250 *x9250 = iio_priv(indio_dev);
+ int ch = chan->channel;
+
+ if (mask != IIO_CHAN_INFO_RAW)
+ return -EINVAL;
+
+ if (val > U8_MAX || val < 0)
+ return -EINVAL;
+
+ return x9250_write8(x9250, X9250_CMD_WR_WCR(ch), val);
+}
+
+static const struct iio_info x9250_info = {
+ .read_raw = x9250_read_raw,
+ .read_avail = x9250_read_avail,
+ .write_raw = x9250_write_raw,
+};
+
+enum x9250_type {
+ X9250T,
+ X9250U,
+};
+
+static const struct x9250_cfg x9250_cfg[] = {
+ [X9250T] = { .kohms = 100, },
+ [X9250U] = { .kohms = 50, },
+};
+
+static int x9250_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct x9250 *x9250;
+ int ret;
+
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*x9250));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ x9250 = iio_priv(indio_dev);
+ x9250->spi = spi;
+ x9250->cfg = device_get_match_data(&spi->dev);
+ if (!x9250->cfg)
+ x9250->cfg = &x9250_cfg[spi_get_device_id(spi)->driver_data];
+
+ mutex_init(&x9250->lock);
+
+ indio_dev->info = &x9250_info;
+ indio_dev->channels = x9250_channels;
+ indio_dev->num_channels = ARRAY_SIZE(x9250_channels);
+ indio_dev->name = spi_get_device_id(spi)->name;
+
+ spi_set_drvdata(spi, indio_dev);
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct of_device_id x9250_of_match[] = {
+ { .compatible = "renesas,x9250t", &x9250_cfg[X9250T]},
+ { .compatible = "renesas,x9250u", &x9250_cfg[X9250U]},
+ { }
+};
+MODULE_DEVICE_TABLE(of, x9250_of_match);
+
+static const struct spi_device_id x9250_id_table[] = {
+ { "x9250t", X9250T },
+ { "x9250u", X9250U },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, x9250_id_table);
+
+static struct spi_driver x9250_spi_driver = {
+ .driver = {
+ .name = "x9250",
+ .of_match_table = x9250_of_match,
+ },
+ .id_table = x9250_id_table,
+ .probe = x9250_probe,
+};
+
+module_spi_driver(x9250_spi_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@...tlin.com>");
+MODULE_DESCRIPTION("X9250 ALSA SoC driver");
+MODULE_LICENSE("GPL");
--
2.39.2
Powered by blists - more mailing lists