Message-Id: <20230420024037.5921-6-decui@microsoft.com>
Date:   Wed, 19 Apr 2023 19:40:36 -0700
From:   Dexuan Cui <decui@...rosoft.com>
To:     bhelgaas@...gle.com, davem@...emloft.net, decui@...rosoft.com,
        edumazet@...gle.com, haiyangz@...rosoft.com, jakeo@...rosoft.com,
        kuba@...nel.org, kw@...ux.com, kys@...rosoft.com, leon@...nel.org,
        linux-pci@...r.kernel.org, lpieralisi@...nel.org,
        mikelley@...rosoft.com, pabeni@...hat.com, robh@...nel.org,
        saeedm@...dia.com, wei.liu@...nel.org, longli@...rosoft.com,
        boqun.feng@...il.com, ssengar@...rosoft.com, helgaas@...nel.org
Cc:     linux-hyperv@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-rdma@...r.kernel.org, netdev@...r.kernel.org,
        josete@...rosoft.com, stable@...r.kernel.org
Subject: [PATCH v3 5/6] PCI: hv: Add a per-bus mutex state_lock

In the case of fast device addition/removal, it's possible that
hv_eject_device_work() can start to run before create_root_hv_pci_bus()
starts to run; as a result, the pci_get_domain_bus_and_slot() in
hv_eject_device_work() can return a 'pdev' of NULL, and
hv_eject_device_work() can remove the 'hpdev', and immediately send a
message PCI_EJECTION_COMPLETE to the host, and the host immediately
unassigns the PCI device from the guest; meanwhile,
create_root_hv_pci_bus() and the PCI device driver can be probing the
dead PCI device and reporting timeout errors.

Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the
mutex before powering on the PCI bus in hv_pci_enter_d0(): when
hv_eject_device_work() starts to run, it's able to find the 'pdev' and call
pci_stop_and_remove_bus_device(pdev): if the PCI device driver has
loaded, the PCI device driver's probe() function is already called in
create_root_hv_pci_bus() -> pci_bus_add_devices(), and now
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able
to call the PCI device driver's remove() function and remove the device
reliably; if the PCI device driver hasn't loaded yet, the function call
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to
remove the PCI device reliably and the PCI device driver's probe()
function won't be called; if the PCI device driver's probe() is already
running (e.g., systemd-udev is loading the PCI device driver), it must
be holding the per-device lock, and after the probe() finishes and releases
the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is
able to proceed to remove the device reliably.

Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@...rosoft.com>
Reviewed-by: Michael Kelley <mikelley@...rosoft.com>
Cc: stable@...r.kernel.org
---

v2:
  Removed the "debug code".
  Fixed the "goto out" in hv_pci_resume() [Michael Kelley]
  Added Cc:stable

v3:
  Added Michael's Reviewed-by.

 drivers/pci/controller/pci-hyperv.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 48feab095a144..3ae2f99dea8c2 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -489,7 +489,10 @@ struct hv_pcibus_device {
 	struct fwnode_handle *fwnode;
 	/* Protocol version negotiated with the host */
 	enum pci_protocol_version_t protocol_version;
+
+	struct mutex state_lock;
 	enum hv_pcibus_state state;
+
 	struct hv_device *hdev;
 	resource_size_t low_mmio_space;
 	resource_size_t high_mmio_space;
@@ -2512,6 +2515,8 @@ static void pci_devices_present_work(struct work_struct *work)
 	if (!dr)
 		return;
 
+	mutex_lock(&hbus->state_lock);
+
 	/* First, mark all existing children as reported missing. */
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 	list_for_each_entry(hpdev, &hbus->children, list_entry) {
@@ -2593,6 +2598,8 @@ static void pci_devices_present_work(struct work_struct *work)
 		break;
 	}
 
+	mutex_unlock(&hbus->state_lock);
+
 	kfree(dr);
 }
 
@@ -2741,6 +2748,8 @@ static void hv_eject_device_work(struct work_struct *work)
 	hpdev = container_of(work, struct hv_pci_dev, wrk);
 	hbus = hpdev->hbus;
 
+	mutex_lock(&hbus->state_lock);
+
 	/*
 	 * Ejection can come before or after the PCI bus has been set up, so
 	 * attempt to find it and tear down the bus state, if it exists.  This
@@ -2777,6 +2786,8 @@ static void hv_eject_device_work(struct work_struct *work)
 	put_pcichild(hpdev);
 	put_pcichild(hpdev);
 	/* hpdev has been freed. Do not use it any more. */
+
+	mutex_unlock(&hbus->state_lock);
 }
 
 /**
@@ -3562,6 +3573,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 		return -ENOMEM;
 
 	hbus->bridge = bridge;
+	mutex_init(&hbus->state_lock);
 	hbus->state = hv_pcibus_init;
 	hbus->wslot_res_allocated = -1;
 
@@ -3670,9 +3682,11 @@ static int hv_pci_probe(struct hv_device *hdev,
 	if (ret)
 		goto free_irq_domain;
 
+	mutex_lock(&hbus->state_lock);
+
 	ret = hv_pci_enter_d0(hdev);
 	if (ret)
-		goto free_irq_domain;
+		goto release_state_lock;
 
 	ret = hv_pci_allocate_bridge_windows(hbus);
 	if (ret)
@@ -3690,12 +3704,15 @@ static int hv_pci_probe(struct hv_device *hdev,
 	if (ret)
 		goto free_windows;
 
+	mutex_unlock(&hbus->state_lock);
 	return 0;
 
 free_windows:
 	hv_pci_free_bridge_windows(hbus);
 exit_d0:
 	(void) hv_pci_bus_exit(hdev, true);
+release_state_lock:
+	mutex_unlock(&hbus->state_lock);
 free_irq_domain:
 	irq_domain_remove(hbus->irq_domain);
 free_fwnode:
@@ -3945,20 +3962,26 @@ static int hv_pci_resume(struct hv_device *hdev)
 	if (ret)
 		goto out;
 
+	mutex_lock(&hbus->state_lock);
+
 	ret = hv_pci_enter_d0(hdev);
 	if (ret)
-		goto out;
+		goto release_state_lock;
 
 	ret = hv_send_resources_allocated(hdev);
 	if (ret)
-		goto out;
+		goto release_state_lock;
 
 	prepopulate_bars(hbus);
 
 	hv_pci_restore_msi_state(hbus);
 
 	hbus->state = hv_pcibus_installed;
+	mutex_unlock(&hbus->state_lock);
 	return 0;
+
+release_state_lock:
+	mutex_unlock(&hbus->state_lock);
 out:
 	vmbus_close(hdev->channel);
 	return ret;
-- 
2.25.1

Powered by blists - more mailing lists