[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <99388c8f-a00a-f0f1-d279-24253c84dea2@in-circuit.de>
Date: Thu, 20 Apr 2023 11:22:44 +0200
From: Ludwig Kormann <ludwig.kormann@...circuit.de>
To: Andre Przywara <andre.przywara@....com>
Cc: samuel@...lland.org, jernej.skrabec@...il.com, wens@...e.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/1] arm: dts: sunxi: Add ICnova A20 ADB4006 board
support
Hi Andre,
Am 20.04.23 um 10:57 schrieb Andre Przywara:
> On Wed, 19 Apr 2023 14:12:29 +0200
> Ludwig Kormann <ludwig.kormann@...circuit.de> wrote:
>
> Hi Ludwig,
>
> thanks for posting this!
>
>> Add board support for ICnova A20 SomPi compute module on
>> ICnova ADB4006 development board.
>>
>> Specification:
>> SoM
>> - Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz
>> - 512MB DDR3 RAM
>> - Fast Ethernet (Phy: Realtek RTL8201CP)
>> ADB4006
>> - I2C
>> - 2x USB 2.0
>> - 1x Fast Ethernet port
>> - 1x SATA
>> - 2x buttons (PWRON, Boot)
>> - 2x LEDS
>> - serial console
>> - HDMI
>> - µSD-Card slot
>> - Audio Line-In / Line-Out
>> - GPIO pinheaders
>>
>> https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006
>> https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
>>
>> ---
>>
>> changes in v2:
>> - use short licensing header
>> - remove deprecated elements from led nodes
>> - disable csi power supply
>> - add missing pins in usbphy node
>> - split dts into SoM dtsi and carrier board dts
>>
>> v1 of this patch was sent to the uboot mailing list [1].
>>
>> [1] https://lists.denx.de/pipermail/u-boot/2023-April/514605.html
>>
>> Signed-off-by: Ludwig Kormann <ludwig.kormann@...circuit.de>
> So apart from what Krzysztof already mentioned (separate binding patch and
> stray line), this looks good to me, and passed dt-validate. Also you
> addressed all the comments I had on the U-Boot post (thanks for that), so
> with those nits above fixed:
>
> Reviewed-by: Andre Przywara <andre.przywara@....com>
Thanks for your review! I will provide v3 in a few minutes.
kind regards,
Ludwig
> Cheers,
> Andre
>
>> ---
>> .../devicetree/bindings/arm/sunxi.yaml | 6 +
>> arch/arm/boot/dts/Makefile | 1 +
>> .../boot/dts/sun7i-a20-icnova-a20-adb4006.dts | 137 ++++++++++++++++++
>> arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi | 63 ++++++++
>> 4 files changed, 207 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>> create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
>>
>> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
>> index 013821f4a7b8..12f0c236f17b 100644
>> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
>> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
>> @@ -305,6 +305,12 @@ properties:
>> - const: allwinner,i12-tvbox
>> - const: allwinner,sun7i-a20
>>
>> + - description: ICNova A20 ADB4006
>> + items:
>> + - const: incircuit,icnova-a20-adb4006
>> + - const: incircuit,icnova-a20
>> + - const: allwinner,sun7i-a20
>> +
>> - description: ICNova A20 SWAC
>> items:
>> - const: incircuit,icnova-a20-swac
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 3cc32722c394..b6b408417261 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -1321,6 +1321,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>> sun7i-a20-hummingbird.dtb \
>> sun7i-a20-itead-ibox.dtb \
>> sun7i-a20-i12-tvbox.dtb \
>> + sun7i-a20-icnova-a20-adb4006.dtb \
>> sun7i-a20-icnova-swac.dtb \
>> sun7i-a20-lamobo-r1.dtb \
>> sun7i-a20-linutronix-testbox-v2.dtb \
>> diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>> new file mode 100644
>> index 000000000000..c1606c085e4e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts
>> @@ -0,0 +1,137 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +// Copyright (C) 2023 In-Circuit GmbH
>> +
>> +/dts-v1/;
>> +
>> +#include "sun7i-a20-icnova-a20.dtsi"
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/leds/common.h>
>> +
>> +/ {
>> + model = "In-Circuit ICnova A20 ADB4006";
>> + compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
>> + "allwinner,sun7i-a20";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + hdmi-connector {
>> + compatible = "hdmi-connector";
>> + type = "a";
>> +
>> + port {
>> + hdmi_con_in: endpoint {
>> + remote-endpoint = <&hdmi_out_con>;
>> + };
>> + };
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> +
>> + led-0 {
>> + function = LED_FUNCTION_POWER;
>> + color = <LED_COLOR_ID_YELLOW>;
>> + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
>> + default-state = "on";
>> + };
>> +
>> + led-1 {
>> + function = LED_FUNCTION_HEARTBEAT;
>> + color = <LED_COLOR_ID_RED>;
>> + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
>> + linux,default-trigger = "heartbeat";
>> + };
>> + };
>> +};
>> +
>> +&ahci {
>> + target-supply = <®_ahci_5v>;
>> + status = "okay";
>> +};
>> +
>> +&codec {
>> + status = "okay";
>> +};
>> +
>> +&de {
>> + status = "okay";
>> +};
>> +
>> +&ehci0 {
>> + status = "okay";
>> +};
>> +
>> +&ehci1 {
>> + status = "okay";
>> +};
>> +
>> +&hdmi {
>> + status = "okay";
>> +};
>> +
>> +&hdmi_out {
>> + hdmi_out_con: endpoint {
>> + remote-endpoint = <&hdmi_con_in>;
>> + };
>> +};
>> +
>> +&mmc0 {
>> + vmmc-supply = <®_vcc3v3>;
>> + bus-width = <4>;
>> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
>> + status = "okay";
>> +};
>> +
>> +&ohci0 {
>> + status = "okay";
>> +};
>> +
>> +&ohci1 {
>> + status = "okay";
>> +};
>> +
>> +&otg_sram {
>> + status = "okay";
>> +};
>> +
>> +®_ahci_5v {
>> + status = "okay";
>> +};
>> +
>> +&ac_power_supply {
>> + status = "okay";
>> +};
>> +
>> +®_usb1_vbus {
>> + status = "okay";
>> +};
>> +
>> +®_usb2_vbus {
>> + status = "okay";
>> +};
>> +
>> +&uart0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_pb_pins>;
>> + status = "okay";
>> +};
>> +
>> +&usb_otg {
>> + dr_mode = "otg";
>> + status = "okay";
>> +};
>> +
>> +&usbphy {
>> + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
>> + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
>> + usb1_vbus-supply = <®_usb1_vbus>;
>> + usb2_vbus-supply = <®_usb2_vbus>;
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
>> new file mode 100644
>> index 000000000000..f1142bda5cd7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi
>> @@ -0,0 +1,63 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +// Copyright (C) 2023 In-Circuit GmbH
>> +
>> +#include "sun7i-a20.dtsi"
>> +#include "sunxi-common-regulators.dtsi"
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +&cpu0 {
>> + cpu-supply = <®_dcdc2>;
>> +};
>> +
>> +&gmac {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&gmac_mii_pins>;
>> + phy-handle = <&phy1>;
>> + phy-mode = "mii";
>> + status = "okay";
>> +};
>> +
>> +&i2c0 {
>> + status = "okay";
>> +
>> + axp209: pmic@34 {
>> + reg = <0x34>;
>> + interrupt-parent = <&nmi_intc>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> + };
>> +};
>> +
>> +&gmac_mdio {
>> + phy1: ethernet-phy@1 {
>> + reg = <1>;
>> + };
>> +};
>> +
>> +#include "axp209.dtsi"
>> +
>> +®_dcdc2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-cpu";
>> +};
>> +
>> +®_dcdc3 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-int-dll";
>> +};
>> +
>> +®_ldo1 {
>> + regulator-name = "vdd-rtc";
>> +};
>> +
>> +®_ldo2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-name = "avcc";
>> +};
>> +
>
--
Dipl.-Ing. Ludwig Kormann
In-Circuit GmbH
Boltenhagener Straße 124
01109 Dresden
Germany
Phone: +49 351 42 66 850
Fax: +49 351 42 66 849
Email: ludwig.kormann@...circuit.de
https://www.in-circuit.de/
Name der Gesellschaft: In-Circuit GmbH
Sitz der Gesellschaft: Dresden
Handelsregister : HRB 23099
Geschäftsführer : Jörg Träger
UST-ID Nr. : DE237550066
Powered by blists - more mailing lists