[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f1409ba9-5370-1e0d-8b6c-e9782505937f@linux.intel.com>
Date: Thu, 20 Apr 2023 07:53:21 -0700
From: Sathyanarayanan Kuppuswamy
<sathyanarayanan.kuppuswamy@...ux.intel.com>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>, bhelgaas@...gle.com
Cc: mika.westerberg@...ux.intel.com, koba.ko@...onical.com,
Mahesh J Salgaonkar <mahesh@...ux.ibm.com>,
Oliver O'Halloran <oohall@...il.com>,
linuxppc-dev@...ts.ozlabs.org, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 3/4] PCI/AER: Disable AER interrupt on suspend
On 4/20/23 5:59 AM, Kai-Heng Feng wrote:
> PCIe service that shares IRQ with PME may cause spurious wakeup on
> system suspend.
>
> PCIe Base Spec 5.0, section 5.2 "Link State Power Management" states
> that TLP and DLLP transmission is disabled for a Link in L2/L3 Ready
> (D3hot), L2 (D3cold with aux power) and L3 (D3cold), so we don't lose
> much here to disable AER during system suspend.
>
> This is very similar to previous attempts to suspend AER and DPC [1],
> but with a different reason.
>
> [1] https://lore.kernel.org/linux-pci/20220408153159.106741-1-kai.heng.feng@canonical.com/
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
>
> Reviewed-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> ---
In Patch #1, you skip clearing AER errors in the resume path, right? So if we disable
interrupts here, will AER driver not be notified on resume path error?
> v3:
> - No change.
>
> v2:
> - Only disable AER IRQ.
> - No more check on PME IRQ#.
> - Use helper.
>
> drivers/pci/pcie/aer.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 1420e1f27105..9c07fdbeb52d 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1356,6 +1356,26 @@ static int aer_probe(struct pcie_device *dev)
> return 0;
> }
>
> +static int aer_suspend(struct pcie_device *dev)
> +{
> + struct aer_rpc *rpc = get_service_data(dev);
> + struct pci_dev *pdev = rpc->rpd;
> +
> + aer_disable_irq(pdev);
> +
> + return 0;
> +}
> +
> +static int aer_resume(struct pcie_device *dev)
> +{
> + struct aer_rpc *rpc = get_service_data(dev);
> + struct pci_dev *pdev = rpc->rpd;
> +
> + aer_enable_irq(pdev);
> +
> + return 0;
> +}
> +
> /**
> * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
> * @dev: pointer to Root Port, RCEC, or RCiEP
> @@ -1420,6 +1440,8 @@ static struct pcie_port_service_driver aerdriver = {
> .service = PCIE_PORT_SERVICE_AER,
>
> .probe = aer_probe,
> + .suspend = aer_suspend,
> + .resume = aer_resume,
> .remove = aer_remove,
> };
>
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
Powered by blists - more mailing lists