[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e3bd41d8-f0c5-6756-13bf-bf29c786ab5c@linaro.org>
Date: Thu, 20 Apr 2023 17:57:53 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
devicetree@...r.kernel.org, Shawn Guo <shawn.guo@...aro.org>,
Taniya Das <quic_tdas@...cinc.com>
Subject: Re: [PATCH RFT v2 00/14] SMD RPMCC sleep preparations
On 8.03.2023 22:35, Konrad Dybcio wrote:
> v1 -> v2:
> - Use CLK_IS_CRITICAL instead of leaving a clk enable vote, expand macros
> to do so
> - Fix the keepalive clocks for 8998 & 660 (CNoC -> PNoC, it was
> confusingly named cnoc_periph downstream)
> - Introduce .determinte_rate to ensure we don't set keepalive clocks'
> rates below 19.2 MHz
> - Add a (!conditional!) way to test the ultimate goal of all these changes
> by essentially enabling unused clk cleanup through a dt property (for
> legacy reasons)
>
> v2 was tested on:
>
> - MSM8996 Sony Kagura (can disable unused)
> - MSM8998 Sony Maple (can disable unused with OOT icc)
> - SM6375 Sony PDX225 (can disable unused with OOT icc)
>
> v1: https://lore.kernel.org/r/20230303-topic-rpmcc_sleep-v1-0-d9cfaf9b27a7@linaro.org
>
> This series brings support for a couple of things necessary for the full
> system idle on SMD RPM SoCs, namely unused clk shutdown and keepalive
> votes (permanent active votes that are required on certain clocks for the
> platform to function).
>
> Tested on MSM8996 and SM6375, does not seem to introduce any additional
> regressions.
>
> Keepalive clocks for other platforms were gathered by digging in old
> downstream kernels, please give them a test.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> Konrad Dybcio (11):
> dt-bindings: clock: qcom,rpmcc: Add a way to enable unused clock cleanup
> clk: qcom: smd-rpm_ Make __DEFINE_CLK_SMD_RPM_BRANCH_PREFIX accept flags
> clk: qcom: smd-rpm: Make DEFINE_CLK_SMD_RPM_BRANCH_A accept flags
> clk: qcom: smd-rpm: Make BI_TCXO_AO critical
Stephen, parallel to all of the discussions, would you be willing to
take patches 4-6 as they are? XO_A being critical is something that
won't hurt without the rest.
Konrad
> clk: qcom: smd-rpm: Make __DEFINE_CLK_SMD_RPM_PREFIX accept flags
> clk: qcom: smd-rpm: Separate out a macro for defining an AO clock
> clk: qcom: smd-rpm: Add support for keepalive votes
> clk: qcom: smd-rpm: Introduce DEFINE_CLK_SMD_RPM_BUS_KEEPALIVE
> clk: qcom: smd-rpm: Hook up PCNoC_0 keep_alive
> clk: qcom: smd-rpm: Hook up CNoC_1 and SNoC_2 keep_alive
> arm64: dts: qcom: msm8996: Enable rpmcc unused clk disablement
>
> Shawn Guo (3):
> clk: qcom: smd-rpm: Add .is_enabled hook
> clk: qcom: smd-rpm: Add .is_prepared hook
> clk: qcom: smd-rpm: Mark clock enabled in clk_smd_rpm_handoff()
>
> .../devicetree/bindings/clock/qcom,rpmcc.yaml | 6 +
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
> drivers/clk/qcom/clk-smd-rpm.c | 133 +++++++++++++++------
> 3 files changed, 106 insertions(+), 34 deletions(-)
> ---
> base-commit: fc31900c948610e7b5c2f15fb7795832c8325327
> change-id: 20230303-topic-rpmcc_sleep-d67aad9f3012
>
> Best regards,
Powered by blists - more mailing lists